What s going on with the high water temperature in the Kema van

There are many reasons for the high water temperature of the car, most of which are caused by water seepage in the water pipe and insufficient cooling water, such as broken fan belt, leakage of water tank or water pipe, thermostat failure, oil leakage, etc. If the engine power disappears or the sound of violent knocking and cylinder knocking is made during driving, it is mostly because the engine is overheating.

The specific reasons are as follows: (1) The cooling fan does not rotate. The cooling fan may be controlled by a thermostat switch; It may also be controlled by a water temperature sensor. (2) Insufficient cooling medium.

Antifreeze: High-end cars are required to be filled with antifreeze all year round; Water or distilled water: temporary substitute; The water tank cover is leaking.

3) The thermostat is damaged. If you want to remove the thermostat, you should plug the small circulation at this time, so as to ensure that all the coolant is dissipated by the water tank; When installing a new thermostat, you should pay attention to the water hole, such as Santana does not have a water hole, at this time, a 6mm drill bit should be used to drill a hole. One function is to be used as a marker; Another function is that during the heating process of the car, the temperature difference between the two sides of the thermostat is generated, so that the thermostat is accurately opened with the water temperature.

4) The water tank is clogged. External blockages should be removed with water or gas; Internal blockages affect coolant circulation and create pressure, which can result in two outcomes, one is a leaking water tank or the other is a particularly high water temperature at high speeds. (5) Pump failure.

The impeller slips or gets stuck, causing the timing belt to break; The impeller is deformed. (6) Cylinder corrosion. The combustion chamber and the waterway are flushed, and at this time, the water will be drained from the drain pipe or white smoke will be discharged, resulting in a frequent shortage of water in the water tank; The waterway and the oil channel are flushed (the oil is white when there is water); The waterway and the waterway are rushed, resulting in poor heat dissipation of the cylinder block, especially at high speed; Blocked waterways.

7) Incorrect ignition timing (corrected with timing lamp) and excessive oil pressure.

insufficient engine coolant; Faulty water temperature sensor or water temperature meter; Downwind driving or long-term low-speed and high-load driving in high temperature seasons; Ignition too early or too late; Carbon deposition is severe.

There are many reasons for engine boiling, such as dispersion heat system problems and engine problems. Heat dissipation system: Poor heat dissipation of the radiator Insufficient pressure of the water pump Blocked circulating water channel Fan cannot be opened normally or the speed is not enough Engine:

Engine knocking Excessive fuel injection caused by high injection pressure. The landlord pays attention to the removal of the thermostat can sometimes solve the problem of high engine temperature, but it is not a long-term solution, after removing the thermostat, the engine temperature will be too low when driving at low temperatures, resulting in insufficient fuel combustion, reducing fuel efficiency, and wasting fuel.

Summary. Kaijie truck water temperature gauge shows a few bars of normal hello dear, between the two are normal phenomena, the engine is working normally water temperature between 90 degrees Celsius and 105 degrees Celsius, riders can look at their car water temperature gauge of the lowest scale and maximum scale is what is the degree Celsius, so that you can judge how many grids are normal. 2 Most automobiles use water-cooled engines, which rely on coolant to be constantly circulated through the engine to remove excess heat.

Kai** cargoster car water temperature gauge shows a few bars of normal hello dear, between the two are normal phenomena, the engine is working normally water temperature which Jane is about 90 degrees Celsius to 105 degrees Celsius, car friends can look at their car water temperature gauge of the lowest scale and maximum scale is what degrees Celsius, so that you can judge how many grids are normal. 2 Most automobiles use water-cooled engines, which rely on coolant to circulate through the engine to remove excess heat.

There is a display table on the meter, and it is normal to ask how many grids there are.

I know that this 90 105 temperature is normal.

Hello dear, it's normal within seven squares.

How many cells are there?

The water temperature is between C---H. C means 60 degrees, as long as the water temperature gauge pointer reaches C, it means that the water temperature has reached 60 degrees. The temperature indicated by the h red bar is 110 degrees.

Generally speaking, the normal water temperature of the car should be about 90 degrees, that is, it is in the middle of the upper block, (the middle water temperature symbol is 85 degrees). It is not normal to exceed the normal water temperature or below 90 degrees, especially if the temperature is above 95 degrees. There are two reasons why the water temperature is too high in general:

If the antifreeze is insufficient or the thermostat fails, the silver wheel should be stopped in time and checked and repaired as soon as possible after the water temperature has cooled. Because the high temperature is extremely damaging to the engine slippage.

Hello pro is 9 grids.