How long does it take for the new Samsung i9100G battery to be used before it can be used

Hello dear Samsung users:

Charging recommendations for newly purchased mobile phones according to your description:

1. Charge for 2-3 hours after the first three full charges, and then use it after each full chargeNote: Do not charge the battery after the power is completely exhausted, it will affect the battery life.

2. Do not use the mobile phone for a long time during the charging process, please wait for the charging to be completed before using and operating the mobile phone.

Here are a few tips for using your phone's battery:

1. Do not over-discharge. When the device prompts "low battery", it should be charged; Charging is not until the device is automatically turned off, and the battery has been over-discharged. This can affect battery life.

2. Do not overcharge. When the charger gives a full charge, it should be unplugged. Now the charger generally has a full self-stop design, it doesn't hurt to take off the battery from the charger for a short time, but leave the battery on the charger for a long time, and the grid voltage rises in the middle of the night, and the charger that has stopped charging will continue to charge after the voltage rises, causing the battery to overcharge.

This can affect battery life.

3. If the battery is not used for a long time, it should be charged to 60%, stored separately in a cool and dry place, and replenished every other month.

We welcome your comments on our services.

Look at the phone's charging display to guess the time.

Empty the battery and recharge it until it is fully charged! The length of time depends on your battery capacity, if the battery is not used up, such repeated charging will affect the life of the battery!!

You just turn on the machine and rush to the quilt, and you can rush it for almost 6 hours. This phone charges quickly.

Turn on and off, the charge is the same, remember to charge and discharge all once a month.

First of all, you need to use it normally, and charge it when there is still 20% of the battery left, not low. Full of put.

The configuration of the 9300 is very high, and it needs to be equipped with more Pinsheng batteries, and it is also good for machine maintenance when cross-used with the original.

The earliest mobile phone batteries were nickel-metal hydride batteries, and the current lithium batteries for mobile phones are divided into two types, lithium-ion and lithium-polymer. The cathode materials of both batteries are the same, generally lithium cobalt oxide (ternary materials and lithium iron phosphate are not in the physical object of mobile phone battery products at present), the difference is mainly that the electrolyte of lithium-ion batteries is lithium hexafluorophosphate, and the electrolyte of lithium polymer batteries is a solid polymer. Polymer batteries basically refer to Sony Aison's batteries.

Generally speaking, polymer batteries are discharged more evenly and have better safety performance, but the cost is relatively high.

The charging precautions for both lithium batteries are basically the same. However, because the lithium battery itself does not have overcharge protection, that is to say, overcharge is very easy to lead to, so all battery manufacturers will install a circuit control chip inside the lithium battery, and it will automatically cut off the power immediately after overcharging. On the contrary, nickel-metal hydride batteries have little impact on their own overcharge, as long as the temperature is at a safe temperature, there will be no accidents.

The safe temperature of lithium battery is about 180 degrees, and it is very easy to exceed this temperature**.

NiMH batteries do not need to be activated when they leave the factory, and the battery itself also has a memory effect, so in order to achieve the best electrical performance, it is often necessary for users to charge to the fullest when they are used, and then completely discharge the power (the voltage is changed from to this, which can prevent the memory effect. If the starting charging time is too short and the battery is not fully activated, a 1000mAh battery may only be charged to 900mAh, which has a great impact on both the battery efficiency and the battery life itself.

What happens when the same method is applied to lithium batteries? Because the crystal properties of lithium cobalt oxide are different from those of nickel hydroxide, they are more prone to lattice collapse than nickel hydroxide. Therefore, during the charging process, if the overcharge time is too long, it is easy to make the spatial activity of lithium cobalt oxide fail, and the charging will inevitably lead to an increase in temperature, which has a great impact on the cathode material and may also lead to danger.

Because of this, we must not use up the battery in the process of using lithium battery and recharge, so that lithium cobalt oxide will seriously fail and shorten its life. The correct way to do this is not to wait until the battery is almost exhausted to recharge, and unplug the battery as soon as it indicates that charging is complete.

So how to charge the battery properly for a newly bought mobile phone? Because any lithium battery must be tested for safety before leaving the factory, the process is equivalent to activation, so it can ensure that the lithium ions in the cathode material can enter and exit freely, and there is no lattice collapse. Therefore, the batteries in the hands of ordinary consumers are strictly tested and activated, and there is no need to worry about the activation status.

The most appropriate charging method for mobile phones is: offline charging in the shutdown state, unplugging the power supply immediately when it is fully charged, and then turning it on for use. Don't charge it that long!! Harmful to the battery!!

The first three times of the new battery should be fully charged for 12 hours, and it will be more durable after that.

It's very tangled.,Go buy a pinsheng.,No memory effect.,Buy it directly and use it directly.,There's no time regulation for those things.。 It's troublesome.

At that time, I struggled with this problem for a long time, and it was also recommended by a friend.

What's the condition of your battery now... I didn't have an hour ... Depressed, uh.

The Samsung i9100 is battery replaceable. The Samsung i9100 itself is equipped with a 1650mAh lithium battery.

The Samsung i9100 is Samsung's first dual-core phone with Android

Operating system, dual-core processor, and 1GB

RAM, there are two versions of the RAM shirt, 16GB and 32GB, and the hardware is quite strong. The screen is a one-inch large touch screen, using Samsung Super

amoled

PLUS technology, the display effect is clearer and more vivid than the previous generation Samsung i9000. The 8 million pixel camera, with a 2 million pixel front camera, takes into account the ability to take pictures and the function of calling. The black and white two-color trillion wax cavity is optional, the appearance design is excellent, and the comprehensive ability is very strong.

The body dimensions of the Samsung i9100 are; , weighing only 116g, is lighter than its predecessor Galaxy

s。Not only that, but it also comes with a screen with a viewing area of up to inches, and at the same time, the body of the Samsung i9100. In May 2011, the Samsung i9100 was officially launched.

It's okay in this case, you don't just need to flush it when it's completely out of power, it's not good for the battery to run out completely.

Look at how you use it.,Put it that doesn't need to be turned on for more than 4 days.,Normal call** can be used for 2 days.,Internet + games = less than a day.。

Anyway, I usually have a battery for insurance.