Midea air conditioner doesn t show temperature numbers what s going on

Midea air conditioner remote control.

The temperature above is not displayed, it should be that the user accidentally pressed the "display" button on the remote control.

The solution is to press and hold the "display" button on the remote control against the air conditioner for about 3 seconds, and the temperature will be displayed. The original intention of setting this button is to reduce the brightness of the remote control display, which can save power on the remote control.

Other faults: the solution to all the buttons of Midea's air conditioner that are out of order.

1. Check whether the remote control is locked, if there is a lock icon on the remote control display, it means that the air conditioner remote control is locked and can be pressed at the same time"The +"and""Adjust button can be unlocked in a few seconds, when the lock icon on it disappears, it means that it is unlocked2, if the unlocking has no effect, you can try to press the reset hole on the back of the remote control, and press it down with a sharp object such as a toothpick, at this time, you can reset the settings of the remote control to see if the remote control is still effective.

3. If pressing the reset button has no effect, take off the remote control battery and place it for about 1 minute before installing it to see if it is effective, if it still does not take a long time to replace the battery, try it.

4. If you have tried it, it should be that the internal circuit of the remote control is faulty, it is recommended to find after-sales service to buy the same remote control, or you can buy the universal remote control online.

Summary. Hello dear, I will answer for you this time, please be patient. <>

The temperature on the remote control of Midea's air conditioner is not displayed, it should be that the user accidentally pressed the "display" button on the remote control. The solution is to press and hold the "Display" button on the remote control against the air conditioner for about three seconds to display the temperature. This button is used to reduce the brightness of the display on the remote control, thus saving power on the remote control.

Midea air conditioner doesn't show the temperature on it, what's going on.

Hello dear, I will answer for you this time, please be patient. <>

The temperature on the remote control of Midea's air conditioner is not displayed, it should be that the user accidentally pressed the "display" button on the remote control. The solution is to press and hold the "Display" button on the remote control against the air conditioner for about three seconds to display the temperature and dismantling degree. This button is used to reduce the brightness displayed on the remote control, so as to save the power on the remote control.

This time, we will answer you at the end of the air thrill, if you have any questions, please consult again. Please give a thumbs up after the end of the consultation, and then thank you for the loss! I wish you a happy life and all your wishes come true! <>

When the light is turned on, the temperature is displayed, and when the light is turned off, it is not displayed.

1. Mistakenly press the "screen display" button: Most brands of air conditioning display screens can be turned off by themselves, and sometimes you may accidentally press the "screen display" button on the air conditioning remote control to shout the bridge, so that the display screen is turned off. Therefore, it is recommended to press the display button with other words such as "screen display" or "light on" on the remote control of the air conditioner again to turn on the socks.

2. Failure of the display diode lamp beads: When the diode beads of the small bulb in the air conditioning display screen are damaged, it is the same as the tungsten filament of the bulb is broken and cannot be powered on, so it will cause the air conditioner display screen to light up when it is started and used. Therefore, after the power is off, you can remove the panel and replace the diode lamp beads, or directly replace the screen display lamp with a new one.

3. Indicator welding circuit failure: such as Zheng Mengguo, the welding circuit connection of the indicator light at the factory has a hidden danger of failure, and it is very likely that the welding circuit will be burned after a period of use, resulting in the indicator light of the air conditioner can not be lit normally, but it will not affect the operation of the air conditioning compressor.

1. It is very likely that the remote control of the air conditioner was pressed.

display button, there will be a situation where this air conditioner does not display the indoor temperature. 2. It is most likely because of the control panel.

There is a short circuit in the line, and it is not possible to display it normally. 3. There are also because the hardware of the display screen is faulty, which will also cause your air conditioner to not work at the temperature.

Suggested workaround:

1. In ordinary use, if it is because you have pressed the display button on the remote control by mistake, you only need to press this button again on the remote control in time, and the closure can be restored to the normal display state.

2. If it is because of the problem of the control panel line, this kind of problem needs to contact Midea air conditioner in time.

The professional service personnel of the manufacturer, let the maintenance personnel of the professional head industry to conduct door-to-door inspection, and after the inspection is clear, the problem will be repaired or replaced in a targeted manner.

3. For long-term use of the air conditioner, there may be a problem with the screen hardware, and it is also necessary to contact professional maintenance personnel for this kind of problem, and if necessary, it is necessary to replace or repair the hardware, so as to solve the problem that the air conditioner does not display the indoor temperature due to hardware damage, otherwise the temperature will not be displayed in the process of use.

Dear, hello, I'm glad to answer for you: Midea air conditioner only shows the set temperature and does not show the indoor temperature Answer: Click the display temperature button, and the house icon will appear in the lower left corner (the right side of the sleep indicator), tap it again until a thermometer appears in the house.

1.It is very likely that the air conditioner does not display the indoor temperature because the display button on the remote control of the air conditioner is pressed. 2.

It is very likely that the control panel has a short circuit in the line, and it cannot be displayed normally. 3. There is also a failure of the hardware of the hall display screen, which will also cause your air conditioner to not work at the temperature.

If there is a display screen in the air conditioner, but the temperature is not displayed, generally the remote control turns off the screen, and the light button of the remote control can be pressed once, if the air conditioner only has the indicator light and no display, the temperature cannot be displayed.

Generally, if you accidentally press the key with the word light, you just need to press the light button again.

Summary. 1. The display screen is damaged, because the display screen adopts liquid crystal design and microelectronic circuit, it is easy to fail. 2. If the circuit circuit of the main control board is faulty, the display of the display screen is controlled by the main control board, and if the display circuit of the motherboard fails, the display screen will not be displayed.

3. The user is not properly operated, and the design of Gree air conditioner is very user-friendly, taking into account the effect of energy saving. 4. The air conditioner display can be turned on and off by the light button of the Gree air conditioner remote control, so the display screen can be turned on and off by pressing the light key of the remote control.

1. The display screen is damaged, because the display screen adopts liquid crystal design and microelectronic circuit, it is easy to fail. 2. The circuit part of the main control board display screen is missing orange fault, and the display of the display screen is controlled by the main control board. 3. The user is not properly operated, and the design of Gree air conditioner is very user-friendly, taking into account the effect of energy saving.

4. The air conditioner display can be turned on and off by the light button of the Gree air conditioner remote control, so the display screen can be turned on and off by pressing the light key of the remote control.

Hello, the question about the Midea air conditioner does not display the temperature on it, the question has been answered for you.