The Redmi update system I just bought often freezes

Hello. According to the problem you described, it is recommended that you back up your important data first, and then enter Recovery to empty all data, and do not restore data temporarily after booting up, and see if it can solve the problem. (Backup:.)

Security Center - Backup, back up the data you need. Clear data: In the shutdown state, press and hold the volume plus button and the shutdown button, and let go when the boot screen appears, and you can enter recovery.

Go to Recovery >Chinese >> Clear Data >> Erase all data).

Hello, there are many reasons for the crash, and one of the most important is that the hardware configuration of the mobile phone is not ideal.

The CPU and memory of the low-end model are difficult to meet the needs of running a large number of applications at the same time, the SD card is not good enough and sometimes causes crashes, and another common problem is that there are too many programs installed and opened.

At this time, we need to develop good habits of using mobile phones, including frequently cleaning up apps that are not commonly used on mobile phones, pressing the "back" key normally to exit the program, canceling live wallpapers, and selecting > off animations in "Settings-> Display- Animations", etc. We also found that on some high-end models, even if there are not many apps, they will feel stuck, which may be due to some apps taking up too many resources or system-level issues. If you can't find the cause, you can reset the system using "Factory Reset" in your phone's settings, which will restore your phone to the state it was in when you first bought it.

In addition, there is another possibility, for example, your mobile phone configuration is not high, and the Andorid version is low, and you have tried a higher version of the AndoRed system, so when flashing the machine to choose the system version, you should decide according to the performance of your mobile phone, and do not blindly pursue a more advanced experience.

<>1. The software is incompatible, or the mobile phone hardware is caused. You can clear the data (invalid is a hardware failure, need to be sent for repair), in the shutdown state, press and hold the tone pants Tongliang plus key and shutdown button, and let go when the boot screen appears, and enter recovery. Go to the re covery > clear all data.

2、Recovery mode refers to a mode that can modify the data or system inside the Android machine,In this mode, you can flash into the new security system,Or backup or upgrade the existing system,You can also restore the factory settings here。

How to deal with Redmi phone crashing during the upgrade process:

1) You can try to deduct the battery first, then put it back on, reboot it, (if it is a built-in battery) press and hold the on/off button, after holding it for a few seconds, if the phone can vibrate, the screen will be stuck to the logo logo can not enter the system. It means that the mobile phone is a system failure, and it is recommended to find the corresponding brand of flashing package on the official website of the mobile phone, and flash it to solve it.

Here's how to flash your phone:

2) Remove the phone battery and install the SD card into the phone. Then install the battery. , press and hold Volume + and at the same time"If you don't press the "Volume-" Power Button, you will automatically enter the "Firmware Update" interface.

3) In this interface, the program will automatically install the original firmware ROM package. At this point, there is no need to operate the phone. When the phone is restarted, the ROM package upgrade is completed. At this point, the phone is back to its normal state.

2) If you press and hold the power button, it cannot vibrate. The screen is not lit, and the screen is still black, which means: There is a hardware failure in the three aspects of the battery and motherboard, and the screen, and it cannot be repaired by flashing, so it can only be sent to after-sales service for hardware repair.

Mi Home is open from Tuesday to Sunday, from 10 a.m. to 6 p.m. Xiaomi's after-sales principle is: return within seven days, replacement within fifteen days, and within the one-year warranty period, non-man-made damage is completely free. We hope you find the above reply helpful.

A more detailed description of the problem will help netizens understand the troubles you are encountering and help you solve the problem more accurately. Thank you for supporting Xiaomi phones!

It's good to flash the firmware, add me, I'll help you get it right