Why does my iPhone update 14 system will be seriously mistouched?

Because you updated, so this situation is caused, if it is not suitable, it is recommended that you flash a new system through the computer side, and flash the original system.

If your Apple phone is more mistouched after updating the operating system, it should be caused by too high sensitivity, you can reduce the sensitivity and give it a try.

Apple's iOS 4 system will have some instability, but the mistouch is serious, most of it is related to the calibration of the screen, check the hardware of the screen.

Well, even if your Apple phone updates the iOS 14 system, it will be serious, and this may be that the version of your phone can't keep up.

Bug problem, you can turn off the phone's lift to wake and tap to wake function, so that even if the phone is locked in your pocket, its screen will not be activated, so there will be no accidental touch. Hope!

Why does my apple phone update 14 system will touch this by mistake is very serious, because every system update will bring some small errors that may not be expected, which will be slowly fixed in subsequent updates.

It is possible that your iPhone does not support 14 systems, and you need to reinstall it back to the original system.

Could it be that it is not the fault of the system, it may be that there is a problem with your screen.

Your Apple phone is updated, is it serious that the system will touch it by mistake, it may be that there is something wrong with the phone, or the screen is too dirty.

After the mobile phone is updated to the latest system, there will always be a touch situation, at this time, the mobile phone screen must be locked to a certain extent.

If you are not used to it, you can return it to the original system.

It should be that after updating the system, it has become more sensitive, which is why it often leads to the phenomenon of false touches.

The main reason is that the configuration of some mobile phones is difficult to support the new system, so there will be some lag and so on.

Apple's updated fourteenth system will pay seriously, and that's because the body memory is full.

This is not that serious, probably because the phone is fake, so it will be like this.

My Apple phone was updated once, and the system will be seriously touched by mistake, and there are many Apple phone update systems. Questionable. It's really not good, you go to the after-sales service to redo the system.

This means that your own mobile phone screen must be bad, so this situation will occur, change the screen.

It may be your psychological effect, it will not be the case normally, if you can get the after-sales service there to help you see it during the warranty period.

Apple's mobile phone updates are particularly fast, so well, I still hope you can upgrade in the system in time.

If he touched it by mistake, it must be serious, this thing must be serious, right?

1. Reason:

1) Generally when writing a file to the system class, due to the order of making or installing, soft.

2. Solution:

1) When the white apple is displayed on your phone screen all the time, please press the "Power and Home Screen" button at the same time, keep it for more than 10 seconds, and force restart the phone.

2) Then pay attention to observe and see if the phone can be restored to normal. If the white apples are still displayed on the screen, read on.

3) The above method has been tried, and if it cannot be restored to normal, it means that the current mobile phone system has completely collapsed, and the only way to restore it is to do so. Since the white apple icon is displayed on the screen at this time, you need to press the "Home + Power" button on the home screen at the same time until the screen goes black.

5) After following the above methods, the Apple iPhone should be turned off at this time. Then follow the steps below:

Press and hold the power button first to turn on the computer, then the Apple logo will appear on the screen, do not release the power button.

Then press and hold the Home button on the home screen until the screen goes black.

When the screen goes black, release the power button and the home button on the home screen until iTunes on the computer detects an iPhone in recovery mode.

If entering recovery mode is unsuccessful, shut down again, try a few more times, and get familiar with it.

7) Then wait for the iTunes connection network to detect the latest system for the phone and prompt me if I want to restore it.

Huh....Apple's mobile phone is really high-end, and Apple's users are so advanced.

The phone version is too low, or there is no memory, here's how to do it:

1. First of all, ios14 supports Apple 8 update, which can be updated in software update, as shown in the figure below.

2. iOS14 has been released, if you need to update and upgrade the system, you can upgrade it in the system settings.

3. Then find the software update in general and view it, as shown in the figure below.

It seems that you want to roll back the official version,Or delete the description file.,You delete the description file first.,Exit the beta version.,And then update to try.,If it doesn't work, connect to iTunes to keep the data and then flash the update.,DFU mode, you have to find it yourself.,But there's a lot of it on the Internet.。

The mobile phone is too old, or the running memory is too small to support the update, now the mobile phone is updated quickly, generally after 3 years, the mobile phone will not be able to keep up with the situation, now the software version is high and occupies a large space, so sometimes there is no need to update, buy a new one in between.

Settings-General-Flip to the end and have a description file-Click in to remove-Restart it's OK to update it again after booting up.。

Don't update, the power is lost quickly.

Because Apple has released the 14 2 system, when the mobile phone is connected to the wifi signal, it will ask whether to update the system, and the mobile phone's system will be updated.

Apple's iOS system is better than Android's smoothness, stability and interface appearance, but unfortunately Apple's iOS system is not as open source as Android's, and is only available for Apple's own iPhone, so although the mobile phone system is the most popular, its market share is not as good as the Android system adopted by many manufacturers.

At present, the biggest highlight of Apple's iOS system is fresh and fashionable, the system fluency and stability are excellent, and it is excellent in terms of optimization.

Because Apple has released a system at 14 o'clock, you have already updated it at the first time.

It's okay when the update arrives, but it won't be, and the signal says no, or it's out of line.

Restart iPhone XS Max Cons: Short-lived. Phone users who find it troublesome to restart can try airplane mode.

Friend Apple XS,Update to,There is often no 4G signal or**No sound。。。 Convincing.

I just want to throw away the phone, and after upgrading, I have a dozen **, and the signal is directly gone; Speechless.

1. OTA update, open the phone's Settings - General - Software Update.

I encountered such an error on a friend's mobile phone before, thinking that it was caused by him not updating it for a long time, so I suggested that he use his computer iTunes to update. Later, another friend also had the same situation, but his system is constantly updated, so excluding the reason why it has not been updated for a long time, I found an effective solution on the Internet and recorded it as follows:

When the verification failure message appears, find "Use Wi-Fi & Cellular Apps" in the cellular network, turn on the "Settings" option, and check Wi-Fi & Cellular Data.

Then turn off the wifi and use the data to re-install and verify it. If it doesn't work, turn on the airplane mode for a few minutes, use wifi to verify, if it doesn't work, turn off the airplane mode, and then use the data traffic to verify;

Extended content: iosios is the fourth beta version of iOS for iPhone, with a version number of 14D27 and a size of about 40MB.

iOS is basically mainly to fix bugs, and at the same time supports Unicode 9 emojis, new TV applications, iMessage full-screen effects, etc., and its subsequent new versions are mainly based on performance optimization and bug fixes.

It may be that the mobile version is too low, or you are not using Wi-Fi to connect to the Internet.

You can use iTunes on your computer to update your system, follow these steps.

1. Connect your iPhone to your computer, open the iTunes software, and click the "iPhone" button on the top right.

2. When iTunes detects a connected device, it will automatically connect to the Internet to detect whether there is an update system available, and then it will automatically pop up the update update.

If it doesn't pop up, you can also click the "Check for Updates" button on your iPhone's summary interface.

If you can't update it, you can only find an Apple after-sales store to find a professional to repair it.

The reasons why the Apple 4 cannot be updated are as follows:

1 It is possible that the system configuration is too low to update the latest system.

2 It is possible that you are not connected to Wi-Fi and cannot complete the update.

3 There may not be enough memory to install the latest system.

4 It is possible that the battery level does not reach the requirement of more than 50% at the time of update.

Solution:1 If it is the first suggestion, you can change the mobile phone with a slightly higher configuration.

2 Don't use 4G to update, it's best to check whether the phone is connected to wifi, you can log in to the web page to try, if not, you can restart the phone.

3 If the memory is insufficient, it is recommended to clean up the cache in the phone, or delete the unnecessary software to save space.

4 If the battery is low, it is recommended to try to update it after it is fully charged.

Since the release of iOS 14, it has been updated to the third beta system, which of course has some bugs.

Recently, many users have reported in the background that iOS 14 has caused a very serious problem of software crashes, and the same is true for the real experience, especially in the past few days, when the weather is very hot, and the app crashes are more frequent.

1.If you are currently set up with iOS 14 beta or other systems, it is recommended to update to the latest version of iOS;

2.Restart your iPhone to see if the app still crashes or freezes;

If none of the above methods can solve the crash problem, you can try the following method.

Open Settings - General, find iPhone Storage, tap Uninstall App, wait for the uninstall to complete, and then tap Reinstall App.

You can rest assured, uninstalling an app is not the same as deleting an app, the uninstall button just deletes the app, but the documents and data inside are still retained, and the contents inside will not disappear. If you encounter the above problems, you can try it

Also, according to a 9to5Mac report, some users have noticed that Instagram accesses the camera in the background.

Some users said that when they manually scrolled from the Instagram app to the feed, they noticed that iOS 14 prompted that the camera was being accessed, and even if the user was not using the camera, such as when scrolling through the **feed, the green dot that appeared indicated that Instagram was accessing the camera in the background.

In response to the fact that apps generally only access the camera when necessary, Instagram said that the phenomenon was a bug that had been fixed, and that officials had promised to fix it in a future update of their iOS app.

Apple Patents**.

According to foreign media Macrumors, a patent for Apple's AR headset shows that Apple is studying how to manipulate virtual controls in the real world, and the wearer of Apple's AR headset will be able to display any surface as a touch screen in the future, and can perform some basic operations.

When using an iPhone or iPad as an AR viewfinder, users typically tap the screen to interact with the objects displayed on the screen, but when wearing an AR headset, it can be cumbersome.

Apple's idea is that icons and buttons can be projected onto a table in AR, for example, where users can reach out and interact with it, and Apple's patent suggests that infrared heat sensing can be used to determine the location of the surface that the user has touched.

Take the mobile phone and throw it away, brother, it is recommended to soak it in water for 3 minutes, pick it up and dry it, throw it on the ground, step on it, and throw it into the river.

The apple phone has been installed with the flashback processing method du: first, restart the.

app, close the app, and then reopen it. 2. Restart the device DAO, turn off the device and turn it back on. 3. Check for iOS and app updates (You may need to use Wi-Fi.)

connection to update some apps). 4. Install other apps from the App Store. Try installing a different app that isn't installed on your device. From the App Store

id。5. Delete and reinstall the app (after the app is deleted, the usage records and personal data related to the app will be lost and cannot be recovered, please think twice before deleting). 6. Contact the app developer. In the app

store, tap the app, then tap Reviews, and under App Store Customer Reviews, tap App Support.