Why do the indoor tiles in rural self built houses resurge? Is there a way to prevent it?

Because it's very humid, it gets damp. The way to prevent this is to make all the walls waterproof so that there is no resurgence of moisture.

Most of the windows are open because of wet weather. Open windows more often in sunny and dry weather, and pay attention to frequent ventilation. At the same time, in humid weather such as rainy days, the number of indoor mopping should be minimized.

Because there is no moisture insulation and moisture-proof treatment, you can use soil methods to close the doors and windows tightly, blow with an electric fan or air conditioner to dehumidify, and mop the floor at any time for protection.

Nowadays, many of the floors in rural self-built houses will no longer be concrete, there are floor tiles, floor tiles, and woodworking boards, so if the floor tiles, in many cases there will be a resurgence of moisture, and I will tell you about the reasons and solutions for the resurgence of floor tiles in rural self-built houses, and I look forward to helping you!

Seasonal element hazards.

The basic principle of anti-moisture of floor tiles is simply that when the hot and wet cold gas hits the low temperature and does not absorb moisture, it will easily condense into water. This kind of situation mostly occurs in rainy season, when there is sufficient precipitation, high temperature, and high humidity.

Hazards of soil layer elements.

Moisture regurgitation of floor tiles can also be caused by the rise and infiltration of moisture in the subgrade soil layer, making the floor material wet and cold, and changing the humidity of all rooms. These situations have longer delays and are more difficult to resolve.

Other elemental hazards.

For example, the drainage pipes are not smooth, and the natural ventilation of the house is not good.

1.You can buy 10 15kg of quicklime powder, put it in a utensil, cover it, and put it under the bed or in the corner of the building. When the temperature is very wet and cold, open the outer cover and close the window door.

But I can open the necessary ventilation window. Because quicklime powder is an excellent moisture-proof agent, it can adsorb gas vapor and turn it into sodium carbonate, so that the indoor air can remain dry.

2.The leaking wall is coated with silicon copper waterproof coating, which can not only block the entry of water vapor, but also make the wall breathable. If there is a standard, you can spray moisture-proof liquid on the wall to create a waterproof layer.

3.If the indoor air is not well circulated. It is very important to maintain indoor air circulation, and in the case of some people's homes, open the windows and doors as much as possible to breathe, so that they can reasonably steam and breathe off the water.

4.The difference between the height of the road surface in the room and the height of the outdoor road surface is not significant, and the drainage pipe is not smooth, which is very easy to cause moisture return. The solution is to increase the outdoor sewage gutter, which is about 30cm smaller than the room.

If the room is more humid, the tiles will be easy to regain moisture, and frequent rain will also make the tiles re-damp, you can brush a layer of waterproof paint on the outside of the house, which can solve this problem, which will make the room drier.

The indoor house is not waterproofed, so it leads to the phenomenon of reverse moisture, and it is necessary to dry it or re-decorate it in this case.

Because the self-built houses in the countryside are not treated with moisture, when it rains, the moisture will spread along the medium of tiles, where the tiles are paved, they will be wet, and the doors and windows can be closed, the electric fan blows or the air conditioner dehumidifies, and the method of mopping the floor at any time is used to protect it.

1. Seasonal reasons. The return of moisture on the floor tiles is because the humid and hot air will liquefy when it encounters the cold floor tiles, forming a layer of water droplets on the surface of the floor tiles. 2. The drainage is not smooth, and the ventilation effect is poor.

The drainage of the room is not in place, the water in the bathroom or kitchen cannot be discharged, and the water infiltration and elimination stove to the ground after a long time, coupled with the poor ventilation of the room, the water vapor can not be discharged in time, and water stains will also form under the floor panel. Understand the repentance paragraph of the network

1. Seasonal reasons. The moisture return of the floor tile is a dust trace, because the humid and hot air will liquefy the cold floor tile, forming a layer of water droplets on the surface of the floor tile, which mostly occurs in the rainy season, the air humidity is large, and the floor will return to moisture if it does not absorb water.

2. The drainage is not smooth, and the ventilation effect is poor. The drainage of the room is so bent that the water in the bathroom or kitchen cannot be drained out, and it penetrates into the ground after a long time, and the room is not well ventilated, and the water vapor cannot be discharged in time, and water stains will also form under the floor panel.

The surface water of the house foundation is too high, resulting in too high soil moisture content. For this, I firmly believe that many friends have deep feelings. For example, when we dig the foundation of our own house, there is water in some areas where the trough depth is close to 1m, which means that the soil moisture content is very high.

In addition, in the rainy season, precipitation does not penetrate into the soil in time, and the soil in the ground contains a lot of water. This moisture is the root cause of moisture resurgence in the room. To sum up, it is the soil in our ground that has water.

The indoor floor is not well equipped with efficient waterproofing and waterproofing measures. The ground practice of self-built houses in the countryside is very simple. For example, after we can basically finish the self-built house, we basically backfill the soil in the heart of the house.

After the backfill of the core soil is carried out, it is basically the ground leveling and tamping, and then a layer of concrete is poured, which is our indoor ground. In the middle and late stages of home decoration, tiles are immediately paved on top of this layer of concrete. The result is that our concrete floors are not moisture-proof and waterproof.

In this case, the moisture in the soil will gradually seep into the cement and then into the tile surface through the concrete.

The quality of the tile is too poor, resulting in its waterproof function is not very good. I think this is more serious for the countryside. Like many friends in the countryside, when decorating, they choose some very cheap raw materials.

For example, the tiles in our room are estimated to be a few dollars a piece of tile, for this kind of tile, if we carefully observe, we can find that there are many quality defects. For example, the back has too high porosity, and then there are bubbles on the surface. If there is water in the back of this kind of tile, it is very likely to penetrate into the surface through our tile, and there will be a serious phenomenon of resurgence.

In view of the resurgence of the ground of self-built houses, we can prevent it when we are building a house. The fundamental reason for the resurgence of self-built houses is that there is water in the soil in the ground, and then retreats indoors through the ground. The resurgence here is not what we call cracks, and everyone has to distinguish this point.

Therefore, for the resurgence of self-built houses, the sister of the Qi family feels that it should be prevented from the following four aspects.

Determine the level of groundwater and then apply the appropriate foundation type. If you want to build your own house, first check the actual location of the groundwater. Once the groundwater is found to be very high, I personally feel that the ground of the podium of the self-built house can be raised.

For example, we can raise the floor of the podium by about 50cm, which ensures that the surface water is not easy to seep into the interior through the interior of our room. In fact, this is also a useful way to avoid resurgence. Like the current newly created houses, the floor in the room is raised by 50 cm, which not only ensures that it is not easy to block the room in rainy days, but also has a very good waterproof practical effect.

Ceramic tile is a common household used to lay the main material of the floor and wall, the tile has the phenomenon of moisture, many consumers will ask, what is the reason for the moisture of the tile? How can he avoid this kind of problem? Next, I will solve your doubts one by one, let's take a look!

1. Causes of moisture.

1.There is too much moisture in the air, such as rainy season, back to the south of the sky, and so on.

2.The floor is not dry, and the keel is reinforced with cement.

3.Keel, wool bathroom tiles are too wet, just use water-based glue.

4.The residence is located on the first floor and other humid environments, and there is no special moisture-proof place.

5.The section where the stone floor meets the bathroom tiles is not closed.

6.Immersed in a large amount of water (e.g. broken water pipes, balcony water backfilling, etc.).

7.Improper construction of the product itself and construction will also cause arching. For example, improper drying treatment, insufficient health care, too low moisture content, too shallow back groove, insufficient expansion gap in construction, too tight laying, etc.

2. How to avoid it.

1.After the tiles are paved, it is still necessary to pay attention to the ventilation of the windows, especially the rooms on the ground floor and with east windows. Both national and industry standards stipulate that air humidity above 70% must be dehumidified to avoid possible water vapor damage.

2.Before paving, the bathroom tile pavement unit should be asked to confirm whether there is a source of moisture in the room, and take corresponding and effective measures to isolate the invasion of water vapor, the key part of isolation is the kitchen, bathroom, open-air balcony and the junction of the paved bathroom slag Chang tile room, which must be isolated from moisture with waterproof materials.

After knowing the causes of moisture in ceramic tiles and how to avoid them, consumers can try to avoid this problem and reduce the loss of home decoration in the later use.

Summary. Hello Kiss is happy to answer this question for you. There is no problem with the return of ceramic tiles in the living room and the construction method of materials, the return of ceramic tiles is generally related to the weather, because the tiles themselves are relatively cool, and the outdoor temperature is high and the temperature difference is large, and the water vapor in the air condenses into water droplets, which are attached to the floor tiles.

This happens mostly during the rainy season, where there is a lot of rain, high temperatures, and high humidity. When the high temperature and humid air (relative humidity above 90%) encounters a low-temperature, smooth, non-absorbent ground, the ground is prone to condensation (generally around 2). Once the climate becomes sunny and dry, humidity can be eliminated.

If it is not the resurgence of the floor tiles, it is necessary to pay attention to whether the waterproofing is not done well.

Hello Kiss is happy to answer this question for you. There is no problem with the return of tiles in the living room and the construction method of materials, the return of tiles is generally related to the weather, because the tiles themselves are relatively cool, and the outdoor temperature is high and the temperature difference is large, and the water vapor in the air condenses into water droplets and attaches to the floor tiles. This mostly happens during the rainy season of the Silver Destroyers, where there is a lot of rain, high temperatures, and high humidity.

When the high temperature and humid air (relative humidity above 90%) encounters a low-temperature, smooth, non-absorbent ground, the ground is prone to condensation (generally around 2). Once the weather is sunny and dry, the humidity can be eliminated. If it is not the resurgence of the floor tiles, it is necessary to pay attention to whether the waterproofing is not done well.

Kiss tile moisture return solution 1, use dehumidification equipment such as turning on the dehumidification function of the air conditioner, or use a dehumidifier to filter the indoor air to make it "dehydrated", while continuing to heat the room. 2. Keep the window open for ventilation Generally, the water droplets appear when the floor tiles return to moisture, basically because the weather is too humid, at this time, it is necessary to keep the windows open for ventilation to ensure that the indoor is dry and breathable, so that the indoor moisture flows outward, which can solve the situation of the floor tiles returning to moisture to a certain extent. 3. Quicklime can remove moisture in the room through quicklime, thereby reducing the probability of re-moisture of floor tiles.

The specific method is to buy 10-15 kg of quicklime, put it in a container, cover it, put it under the bed or in the corner of the house, and when the tiles are damp, you can close the doors and windows to open the container, so that the quicklime can absorb the moisture in the air, which is conducive to ensuring indoor dryness. 4. Silicone waterproofing agent should be coated with silicone waterproofing agent for wet brick walls, which can prevent moisture from entering and make the wall breathable. If possible, spray the wall with a moisture-proof solution to form a moisture-proof layer.

This method works well and can be said to be a one-and-done solution, but the disadvantage is that the cost is relatively high.