I want to start a small soap factory, do I need any big equipment?

If you use soap base to make it, you don't need to use equipment at all, just a few more people!

The cost of a small soap factory is not fixed. The main round faces in soap production are oils, fatty acids, rosin.

Alkali, salt, decolorizing agent, colorant, fragrance, transparent agent, calcium soap dispersant, fluorescent brightener and antioxidant can also be added as needed.

Fungicides, chelating agents.

Wait. <>

Production process:

Soap production includes refining, saponification, salting-out, washing, and alkali precipitation before it can be produced into soap.

Refining: The purpose is to remove impurities from the oil. The refining process includes degumming and deacidification. Degumming is the removal of phospholipids from greases.

Isocolloids, phospholipids and other colloids can be hydrated with water, and then precipitated and precipitated, this method is called hydration. Concentrated sulfuric acid can also be used.

Carbonization of phospholipids and similar impurities is called acidification.

Saponification: After refining the oil, it undergoes saponification reaction with alkali.

The main saponification method is boiling. The soap pot is cylindrical or square, and the soap pot is not only equipped with a pipeline for conveying grease, lye, water, brine, etc., but also a direct steam or steam coil to pass in the steam and stir the soap.

Salting-out: In the closed soap, add table salt or saturated salt water to separate the soap from the dilute glycerol water. After the closed soap glue is salted, the upper layer of soap is called soap particles, and the lower layer of salted glycerin water is discharged from the bottom of the soap pan, which can be glycerin.

If you calculate the cost of a small soap factory, this depends on the grade of soap you produce, the performance of the machine, etc., and the price of a single set of equipment is usually a few w. This project is a good project with little investment and fast returns. But to succeed must do the following, one is to do a good job of market research before opening, to understand the number of local similar manufacturers, if there are more similar manufacturers, it is recommended not to rush in, the second is to learn the soap making technology first, and then introduce the project.

Handmade soap

Handmade soap is a soap made artificially using natural oils and lye. Basically, it is the result of the saponification reaction of oil and lye, which can be used for washing and cleaning after curing and maturation procedures. Handmade soap can also be added with a variety of different additives according to personal preferences and purposes, such as milk, essential oils, flavors, flowers and herbs, Chinese herbal medicines, etc.

Handmade soap has long been fashionable in South Korea, Europe, Japan, Taiwan, Hong Kong and other places, handmade soap can not only make a unique fragrance, color, shape of art according to personal preferences, but also make a special effect soap that meets the characteristics of your skin.

Summary. Extended information: the grade of soap produced and the performance and size of the machine, etc., generally speaking, the price of a single set of equipment is between 10,000 and 50,000.

It takes about 5 million to set up a factory, and the land for setting up a factory requires at least 5 million labor, and it may take hundreds of millions of yuan to set up a large factory. The cost of a small soap factory needs 10,000w, not including the cost of the site, a mixer, a synthesis machine and a sealing machine, the cost is 10,000 yuan, and the soap production is generally oil refining, saponification, soap-based drying, and ingredients.

Hello dear, glad to answer for you! To open a soap factory, you need to open a daily chemical plant, and you need to invest about 300,000 yuan. It mainly depends on how large the investment you want to return, twenty or thirty thousand can be, two or three million is not much, so it mainly depends on your business and the Lu Kai products you process.

Extended information: The grade of soap produced and the performance and size of the machine, etc., generally speaking, the price of a single set of equipment is between 10,000 and 50,000. It takes about 5 million to set up a factory, and the land for setting up a factory requires at least 5 million labor, and it may take hundreds of millions of yuan to set up a large factory.

The cost of a small forest blind soap factory needs 10,000w, not including site costs, a mixer, a synthesis machine and a sealing machine, the cost is 10,000 yuan, and the soap production is generally oil refining, saponification, soap-based drying, and loss of Zen materials.

Only 10W is not available for orders.

There are not enough pro-funds.

It takes about 10 to take orders.

Pro, yes. Who to take orders from.

You have to take orders from merchants.

Pro-department store.

Is it that I invest about 10w in the merchant to give me equipment and technology.

Pro-device and technology 10W is not enough.

A business license and a health permit are required.

Small soap workshops can be produced. The production of soap requires a license for the production of imperial liquid and a business license for excavating and dismantling cherry blossoms. The industrial and commercial bureau is the administrative organ that applies for a business license, so you can only apply for a business license when you go to the industrial and commercial bureau, and the business activities must be registered with a business license.

Introduction to soap

Soap is a fatty acid.

A general term for metal salts. The general formula is rcoom, where rcoo is the fatty acid group and m is the metal ion. Broadly speaking, oil, wax, rosin.

or fatty acids and alkalis saponification or neutralization of fatty acid salts, can be called soap. Soap can be soluble in water and has the effect of washing and decontamination. The various types of soap include soap, also known as toilet soap, metal soap and compound soap.

The carbon number of fatty acids in daily soap is generally 10 to 18, and the metals are mainly alkali metals such as sodium or potassium.

Ammonia and some organic bases such as ethanolamine and triethanolamine are also used.

etc. made of soap for special purposes. Soaps include laundry soaps, toilet soaps, metal soaps, liquid soaps, as well as related products such as fatty acids, hardened oils, glycerin, etc.

Ingredients of soap: sodium salt R-CO2NA of carboxylic acid, synthetic coloring, synthetic fragrance, preservative, antioxidant.

Foaming agent, hardener.

Viscosity agent, synthetic surfactant.

Adding a softener to hard water removes the hard plexus water ions and allows the soap to work. Medicated soap is mainly made with some disinfectant added to it. Soap adds fragrance to it. Crystal soap contains saponin, which has a particularly strong degreasing power.

S20 blender.

1. Use: The equipment is mainly used for stirring soap chips when producing soap in daily chemical plants, and the equipment has a simple structure and long service life. All parts that come into contact with the soap are made of high-quality stainless steel.

Second, the main technical parameters.

Stirring capacity - 20 kg times.

Motor power kW min.

More details

S150 three-roll grinder.

First, the use: simple as liter.

This machine is used for mixing, grinding fine soap particles at room temperature.

Second, the main technical parameters.

Roller diameter – 150 mm.

Length of the working surface of the roller - 300 mm.

Motor power kilowatts.

Roller speed ratio: 6

Dimensions - 820 800 920 mm.

Weight --600 kgMore details

XT-80 strip machine.

1. Use: This machine is used to produce small soap, and the ground soap flakes are squeezed and kneaded into strips for the soap printer to form.

Second, the main technical parameters.

Production capacity --80 kg hour.

The diameter of the old screw rod is 100 mm.

Screw speed - 43 rpm.

Motor power kilowatts.

Dimensions -- 950 400 1100 mm in more detail "Rubber Noise".

XD-20 printer.

1. Use: This machine is used to produce small soap, and the bar soap body is printed into blocks.

Second, the main technical parameters.

Number of punches - 120 minutes.

Production capacity --20 times.

Soap specification - 20 grams - 60 grams.

Punch stroke – 52 mm.

Motor power kilowatts.

Soap is an indispensable daily detergent, and the history of people's use of soap can be traced back to Italy BC. Since the eighties of the last century, soap has gradually begun to be widely used in China.

In the Song Dynasty, there was a synthetic detergent, which was to mash and grind the natural honey locust and add various medicinal petal powders to make a spherical shape for washing the face and bathing the body. Some honey locusts are directly steamed in water, and then medicinal petals are added for bathing. Plant weak alkali soap (SOAP) is one of the most important hair washing and care products, and it is a daily consumer product.

Some manufacturers use sodium fatty acids and other surfactants as the main raw materials to make soap, add quality improvers and appearance improvers, and make products after processing and molding, because these pH values are high, ** can not be tolerated for a long time, so they can only be used for laundry. The pH contained in the plant weak alkali soap is low, which can be accepted by human beings for a long time, and the various nutrients contained in the plant, as well as vitamins, also have the effect of nutritional care.