Why do you still leave if you don t have an electric energy meter at home?

1.First of all, check whether the electrical equipment such as lighting fixtures, TVs, and air conditioners have been in the power-off position, because the plug of the refrigerator or water heater has not been unplugged, and the refrigerator and water heater still need electricity in order to keep warm, so the electric energy meter.

It's normal to be able to walk.

2.Please turn the air switch at the outlet end of the electric energy meter of your household.

After disconnecting, first check whether there is still electricity in the home, if so, you may "go to the house" with the neighbor's electric energy meter, call 95598 electricity service**, and the power department will send a technician to the scene to check.

3.If the air switch at the outlet end of the household energy meter is disconnected, and the energy meter is still rotating, it may be that the outlet line of another household is connected to the household energy meter.

Judgment method 1: Please check whether the outgoing line of the household electric energy meter is connected to the inlet end of the air switch of the household, or whether the inlet end or outlet end of the air switch of the household is connected to another line in parallel.

Judgment method 2: Please disconnect the air switch at the outlet end of the household electric energy meter, and remove whether there are neighbors' electrical appliances affected at the same time, if so, it means that the neighbor's electrical appliances are overlapped with the inner line behind the household electric energy meter.

4.After excluding the above factors, the electric energy meter is indeed still moving, please go to the power supply bureau to which the customer belongs.

The business hall shall apply for the verification of the meter.

First of all, confirm whether the electrical equipment such as lighting fixtures, TVs, and air conditioners have been disconnected, and if not, it is normal for the electric energy meter to go. Secondly, after disconnecting the air switch at the outlet end of the electric energy meter of the household, first check whether there is still electricity in the home, and if so, it may be "tandem" with the neighbor's electric energy meter. If there is no electricity, then observe whether the electric energy meter will go, if it is only slowly diving within a circle, it means that this is caused by the inertia of the meter turntable, which is a normal phenomenon.

If the energy meter is still turning, it may be someone else's outgoing line connected to your own energy meter. After excluding the above factors, the energy meter is indeed still moving, and the customer can apply to the power supply unit to verify the meter.

<> "When it comes to the electricity meter, Kai Congsun believes that everyone is familiar with it, it is a common metering tool for every household to keep an eye on the chain. So why not go with an electric meter? What should I pay attention to when installing an electricity meter?

1. Why don't you use the electric meter and go:

1. It may be that the line is leaking, you can turn off the main valve, if the meter does not go, it means that the line or electrical appliances at home are leaking.

2. It may be that the electrical appliances on the line are still running, such as TVs and water heaters, but the switch is turned off, but the socket is not unplugged, and the meter will also run if the current is low.

3. It may be that someone stole electricity and connected the branch wire to the main switch.

4. The above are all excluded, which may be caused by the loss of magnetism of the magnet in the meter.

Second, what to pay attention to in the installation of electricity meters:

1. The meter is mainly used to measure electric energy, with high accuracy, so it should not be placed in a place with high vibration to avoid damaging the internal electrical components, and it should also be kept away from the direct sunlight area, and should be installed in a cool place as much as possible to ensure the service life. In addition, when installing the meter, it is best to choose the meter box for plastic products, because the metal meter box needs a grounding wire, and when connecting the meter, the meter should be installed on a dry, vibration-free wall, and maintain good ventilation around, otherwise it will affect the accuracy of its measurement.

2. When installing the meter, pay attention to the correct connection method of each branch line, once the connection is wrong, it is easy to cause the risk of electric shock. Moreover, when the terminal pile, the screws should be tightened, otherwise once the large current passes, it will cause the joint to heat up, which will not only affect the normal electricity consumption, but also the possibility of burning the meter.

3. When the meter is installed, it is usually about a meter away from the ground, and it cannot be installed too low, as the low place is easy to get wet, and it will also be touched by children, which will not only affect the accuracy of measurement, but also cause safety accidents. In addition, when the meter is installed, it should be fixed horizontally and gently on the wall, and tightened with screws, and cannot be tilted or inverted. Otherwise, there will be problems such as loosening and falling.

There are two main reasons: first, although the household appliances are not working normally, in the standby state, the electrical appliances and lines still need to consume a small amount of electrical energy to maintain the starting signal receiving circuit; The second is due to the aging of indoor wiring, leakage current, and consumption of electric energy.

Stereos and TVs continue to consume electricity in the standby state, so it is recommended that residents unplug the power plugs when the electrical appliances are not used for a long time to avoid the generation of electricity from standby energy consumption.

If there is no fault in the meter, it means that the electricity consumption of the home is relatively small, especially the mechanical one, and the electronic one will see the words even if the indicator light on the electrical appliance is on.

Other reasons: 1. Abnormal situation: the wire does not pass through the meter or only one line passes.

2. The meter coil is faulty, or the measuring element inside is damaged.

3. If there is electricity and no electrical appliances to use, it will not go out of words.

The meter suddenly stopped moving, and the general situation is that the meter is broken.

If you are an honest person, you can report it to the electricity supply bureau, and the electricity supply bureau will arrange for employees to come to your home to replace the new meter.

If you're busy, you can also ignore the fact that your meter is broken. The meter reader of the power supply bureau will find that the meter is broken during the meter reading and will also arrange for an employee to come to your home to replace the meter with a new one.

The electricity meter is the abbreviation of the electric energy meter, also known as the watt-hour meter, fire meter, electric energy meter, and kilowatt-hour meter, which is an instrument for measuring the power supply. Why sometimes there is an electric meter at home and does not go, the following is to learn. Sorted out the reasons why the electric meter does not go for everyone, and see if you have been hit!

The reason why there is an electric meter at home and does not go is either that the meter is broken, or the meter is too bad to see. Electric energy meter, the abbreviation of electric energy meter, is used to measure electric energy, also known as electricity meter, fire meter, electric energy meter, kilowatt hour meter, refers to the measurement of various electrical quantities of instruments. When it comes to electricity meters, you may feel familiar and unfamiliar.

Everyone has at least one meter in their home. Many people may only know that the meter is used to measure the number of electricity, but they don't know what the meter is. Therefore.

In our real life, it is common to see people clash with the electrician who reads the meter for a few kilowatt-hours of electricity, that is, a few yuan, and even refuse to pay the electricity bill. What do you think about smart meters? There are four ways to do this:

Generally, direct meters and three-phase meters can read data directly, reducing the last reading, which is the amount of electricity at this stage. The straight meter has a thick incoming wire, and if you look closely, there is no transformer connection. The second:

The three-phase meter is connected by a current transformer, and there are 10 wires on the wiring of the meter, and the current ratio of the current transformer is observed. The number read on the meter multiplied by the current ratio is the amount of electricity, and the variation loss and line loss are added to the exactly. The third type:

How do you look at the meter? The single-phase meter measures the amount of electricity in the three phases, multiplies the reading amount by 3, and if the meter is connected through the transformer, the number of meters needs to be read multiplied by 3, and then multiplied by the current multiple of the transformer. 4. The smart meter has only one LCD screen.

If it is a single phase, the total power and remaining power will be displayed directly, and the reading can be done directly. If it is an IC card meter, only the light-emitting tube displays, which is a single graphics card. There is a small red dot on the meter, the red dot jumps to the total electricity consumption, you can use it all the time, and jump to the remaining place to read the meter.

Dual graphics card meters, direct meter reading, three-phase prepaid meters, direct reading meters, mutual inductance meters, readings multiplied by current multiples.

Dear, I'm glad to answer for you. There is electricity in the meter but there is no power in the home can be caused by the following reasons: tripping:

If the household electrical load is too large, the circuit will automatically disconnect, that is, trip, to protect the circuit safety. At this time, there is still electricity on the meter, but there is no electricity in the house. It is necessary to check whether the circuit load is too large, such as the simultaneous use of high-power electrical appliances, circuit aging, etc.

Aging circuits: Aging circuits such as wires and sockets can also lead to a lack of power in your home. It is necessary to check whether the circuit is aged or damaged, such as aging wires, damaged plugs, etc.

Loose circuits: Loose circuits such as wire connectors and sockets can also lead to a lack of power in your home. It is necessary to check whether the circuit connection is loose, such as the loose connector of the electric smart key wire, the loose socket, etc.

Power supply failure: A failure in the substation or distribution box where the power supply is located can also lead to a lack of power in the home. It is necessary to inquire about the location of the power supply, whether there is a power outage, maintenance and other information.

Faulty electricity meter: A malfunction of the meter itself can also cause a home to run out of electricity. If you need to check whether the meter is working properly, you can contact the power supply company for inspection and maintenance.

Dear users, if the meter has electricity but there is no electricity at home, there may be the following reasons:1Circuit breaker tripping:

Circuit breaker is a device to protect the circuit, when the circuit is overloaded or short-circuited, the circuit breaker will automatically trip and cut off the circuit. If the circuit breaker trips, it will cause no power in the home. At this time, it is necessary to check the circuit breaker, find out the cause of the fault and solve it.

2.Poor wire contact: Poor wire contact can also lead to no power in your home.

In this case, it is necessary to check whether the wire connection is loose or in poor contact, and repair it in time. 3.Meter failure:

A faulty meter can also result in a meter having power but no power at home. When this collapses, you need to contact the Hu Min power supply department for maintenance or replacement of the meter. The above issues are related to electrical safety, if you do not have the relevant knowledge and skills of Tomoeda, it is recommended to seek professional help.

That's a good dare, steal the fun! The meter is the magnetic field generated by the passing of electric current and drives the rotation of the meter. , This means that the coil inside may be broken, but it can still be powered View the original post