What s going on with an iPhone phone emergency call?

There is no signal on the mobile phone and the meaning of "emergency call only" appears:

The mobile phone did not search for the network signal of the mobile phone service provider, so some mobile phone functions cannot be used! Such as calling, texting, surfing the Internet, etc. "Emergency call only" means that you can use Emergency SOS; Such as, wait to see what the phone supports urgent**.

Generally, these 3 can be dialed by "emergency calls only". Even if you don't have a SIM card, you can still make emergency calls; That's what it means.

This is the case:

1. Confirm whether the mobile phone has a SIM card and whether the SIM card is loose;

2. Whether the PIN code of the mobile phone SIM card is locked;

3. Whether the signal of the mobile phone is good;

The prompt "Emergency Call Only" on the mobile phone is a network problem, and the performance of the mobile phone is off. If the mobile phone is in a dead zone or a weak signal area (especially in a high-rise building), this prompt will appear, and you can only dial an emergency call** (e.g. 110, 119).

At this time, as long as the mobile phone is taken to a place with a strong signal, this problem can be solved, but it does not mean that it can be restored immediately when you get a good signal, especially in a place where there is a signal but not strong It is more difficult to restore (note: it is very power-hungry at this time), this is because automatic search has a problem of adapting time.

Here's how to quickly restore communication:

1.Reboot after shutdown;

2.Go to Phone Settings > Network Settings and select Search Again. When the network is found, "Emergency Calls Only" or No Service in the upper left corner of the screen will disappear and normal communication will be available again.

The mobile phone prompts "emergency call", and there are generally the following reasons for this situation:

1.It is possible that the mobile phone card does not match the mobile phone;

2.If the mobile phone card is damaged, it is recommended that you bring a valid certificate to the business hall to replace the card;

3.Poor contact with your phone or your location is caused by a dead signal or a sudden lack of signal.

You're locked out......

Suspect that you are the American version, and there is currently no way to crack the latest version of the firmware......Wait a short time.

If you are using a Unicom mobile phone card to display emergency calls, there may be the following reasons:

1. SIM card.

The metal contacts with the mobile phone are not in good contact, it is recommended that you remove the SIM card and reinsert the mobile phone to try it;

2. The SIM card does not match the hand potato selling machine, so it is recommended that you put the SIM card into someone else's mobile phone to try it.

Now, if it can be used normally, please bring the repair card and mobile phone to the mobile phone after-sales service provider to test the mobile phone; If you can't use it normally, it is recommended that you bring a valid Qingshouwei ID card and SIM card to the Unicom business hall to test the SIM card.

Make a consultation.

Mobile phone emergency call means to use a mobile phone to call the police or distress number. The urgency of these numbers led countries to stipulate that they could use any network available at the time.

There are several reasons why "Emergency Call" may be displayed on the phone screen

1. The location is a blind spot, or there is no signal suddenly;

2. The metal contacts of the mobile phone card are not in good contact with the mobile phone;

3. The mobile phone card has been cancelled;

4. The mobile phone card does not match the mobile phone.

The solution to the "emergency call" displayed on the mobile phone screen is as follows:

2. Check whether the SIM card is in poor contact, it is recommended to use an eraser to wipe the contact points between the mobile phone card and the mobile phone;

3. Change a SIM card and try to use it again;

4. Change the SIM card to another mobile phone, if it still shows "emergency call", it is recommended to take the mobile phone to the business hall for testing.

Generally, if the mobile phone is limited to emergency calls, it may be a network signal problem caused by the abnormal SIM card of the mobile phone.

Hello, the general mobile phone is only limited to emergency calls, which may be a network signal problem caused by the abnormal SIM card of the mobile phone [Summary] What is the reason why the mobile phone shows that it is only for emergency calls? 【Question】 Hello, the general mobile phone is limited to emergency calls to Hungry Oak, which may be a network signal problem caused by the abnormal SIM card of the mobile phone

Taking the iphone7 mobile phone as an example, the specific operation has the following steps:

1. Open "Settings" on the desktop of your phone.

2. Open "Settings" and find "SOS Emergency Contact" to enter.

3. Then click "Set up emergency contacts in health" to enter.

Four. Click on "Create Medical ID" to enter.

Five. Once inside, fill in your medical information.

6. Then click "Add Emergency Contact" below to proceed to the next step.

7. Finally, click "Done" in the upper right corner.

8. Finally, press and hold the "volume button" and "power button" of the mobile phone to use "SOS emergency call".

Summary. Glad to serve youIf there is an emergency call on your iPhone, it may be because you accidentally pressed the button of the SOS function, or the person holding the Apple device has held down the secondary and side buttons while hanging the support. Here's how to do it:

1.On the emergency call interface, do not press "Call"or "Cancel.""Button. 2.

Press and hold the side button and volume down button at the top right of the phone screen, and don't let go (if it's an iPhone 7 or earlier, you need to press and hold the side button and home button). 3.If you don't let go, you can cancel the emergency call for about 5 seconds.

Glad to serve youIf there is an emergency call on your Apple phone, it may be because you accidentally pressed the button of the SOS emergency function, or the Huaifan person holding the Apple device holds down the auxiliary key and side button while hanging the support. The method of removal is as follows:1

On the emergency call interface, do not press "Call"or "Cancel.""Button lead finch. 2.Press and hold the side button and volume down button on the top right side of the phone screen, and don't let go of the phone (if it's an iPhone 7 or earlier, you need to press and hold the side button and home button).

3.If you don't let go, you can cancel the emergency call for about 5 seconds.

If you pressed the Call button, you can choose to cancel immediately or wait for 911 (or local emergency services) to answer and note that it was pressed by mistake. If you press the Pick Up Chainshade Match or Cancel button, you can continue to use your phone. I hope mine can help you, and I wish you good health.

Why does your phone show an emergency call? Hello dear, if the status bar of your mobile phone shows a strong signal and a weak signal, and the "X" screen shows emergency calls only, it may be due to the following reasons: 1. The SIM card has not passed the real-name authentication of the operator If you do not have real-name authentication, there may be problems such as abnormal signal, unable to call, send text messages, and unable to access the Internet for data services, etc., it is recommended that you bring your ID card to the business hall for real-name authentication.

2. Use a metal protective case Metal may interfere with the signal, resulting in a communication failure on the mobile phone. 3. Cutting the SIM card Cutting the card or non-standard SIM UIM card may lead to poor contact of the card slot, and there are communication problems such as no network and weak signal. 4. SIM UIM card cannot be recognized Please confirm the network standard supported by the mobile phone, the SIM UIM card type supported by the mobile phone in different network standards is different.

Please check whether the status bar icon of your phone is displayed as a cardless logo, if it is displayed as a cardless logo, please refer to the back sticker of your phone or the accompanying Quick Brother Guide to check whether the SIM UIM card is inserted correctly. Please reinsert the SIM UIM card and make sure that the SIM UIM card chip is in good contact with the card deck. 5. No network signal Please re-enable the card with no signal once to try to repair it

Below: Please click Settings > Dual SIM Management, and above please click Settings > Wireless & Network > Dual SIM Management Click Turn off and then re-enable the card. It may be that the current network signal is poor and the mobile phone has no signal, please wait for a period of time or go to a place with a better signal to use the mobile phone.

6. Weak signal Please confirm whether the SIM UIM card is valid. Insert the SIM UIM card into another phone to see if it works. Please go to Settings > About Phone > Status Messages > Network (below) or Settings > System > About Phone > Status Messages > Network (and above) to check the specific signal strength and compare with other phones under the same network standard of the same operator.

If the signal strength is basically the same, it means that there is a problem with the network coverage in the area or there is signal interference in the area (for example, in areas with dense buildings), and the signal will generally return to normal when you leave the area. It is recommended to call the operator** for consultation. 7. SIM UIM card is deactivated For dual-SIM phones, the following:

Please click Settings > Dual SIM Management, and above please click Settings > Wireless & Network > Dual SIM Management to confirm whether the SIM UIM card is enabled. 8. Turn on airplane mode After the airplane mode is turned on, the airplane mode icon will be displayed in the status bar, and the phone will have no signal at this time. Please swipe down from the top of the desktop on your phone, open the drop-down menu, and tap Airplane Mode to turn off Airplane Mode.

If the above methods don't solve the problem,

If you are using a Unicom mobile phone card to display emergency calls, there are the following reasons:

1. The contact between the SIM card and the metal contacts of the mobile phone is poor, it is recommended that you remove the SIM card and reinsert it into the mobile phone.

2. The SIM card does not match the mobile phone, it is recommended that you put the SIM card into someone else's mobile phone to try it, if it can be used normally, please bring the repair card and mobile phone to the mobile phone after-sales service provider to test the mobile phone; If it cannot be used normally, it is recommended that you bring a valid identity rollover certificate and SIM card to the Unicom business hall to test the SIM card.