How to flash the screen when the smart phone is turned on 5

Flashing preconditions.

2: The mobile phone has sufficient power, and it is recommended that more than 50% of the battery remains.

Ensure that the internal storage of the phone or the external SD card of the mobile phone has at least 100M or more remaining capacity than the ROM package.

Step Method. 1.Connect your phone to the flashing master.

3.Perform rooting

6.One-click flashing.

Prepare the ROM,Start flashing the phone with one click,Before flashing starting, the flashing master will check the phone and the flashing package,Click "Browse" to select the best ROM just now,Don't forget to follow the prompts to back up contacts、SMS and applications。

After entering the "one-key flash" mode, the device will enter the automatic flashing mode, and after about 5-15 minutes, you can complete the one-key flashing, please be patient.

Wait patiently for a few minutes and the flashing will be done automatically.

What do you want to say about the mobile phone first, an Android machine, which makes the old man embarrassed (specific phone model Then).

The screen is fixed when it is turned on, because there is a problem with the phone itself, usuallyDue to the loss of system files in the fuselage, the temporary abnormality of the fuselage system, and the failure of the device to work normally due to root operation, you can try to initialize the phone to solve the problem.

Prepare the tool:

Xiaomi 10 MIUI

Specific steps: 1. Find "Settings" on the desktop of your phone and click to enter.

2. Select "Other advanced settings".

3. Then select the "Backup & Reset" option.

4. Note: To enter the "Backup & Reset" interface, be sure to click "Local Backup" first to prepare the information on the phone.

5. After the backup is completed, select "Factory Reset" at the bottom of the "Backup & Reset" interface.

6. Then click "Confirm Reset".

It is recommended to deal with it in the following way:

This is mainly due to the system instability and poor compatibility during the upgrade, resulting in system crash or boot file corruption.

Try to solve it with the following method:

1. Restore factory settings.

1. Press and hold the volume down button + power on button at the same time in the shutdown state.

2. The boot interface appears, release it, and enter the recovery flashing tool for a while.

3. Through the volume up and down, select wipe data, OK (the volume button is selected up and down, and the power button is OK), the option appears, and yes is selected.

4. Click Wipe Cache after returning to the menu automatically until it automatically returns to the main menu.

5. Select reboot and reboot.

If it is a Chinese menu. It's the same with choosing to perform data purging and emptying the cache, respectively.

2. If the above methods can't solve the problem, try to fix it with the brick saving tool of the flash tool.

1. Install the flashmaster on the computer and turn it on.

2. Turn on the power of the mobile phone and connect it to the computer.

3. Choose a brick saver with a tool, and the repair is OK.

3. If the above methods cannot be solved, it is likely to be a hardware problem, and it is recommended to find a maintenance personnel to solve it.

If you can connect to the computer, you just need to remove the battery and install it but don't turn it on, you can also flash the computer!

Don't use the computer, use the mobile phone to brush it yourself, press and hold the volume button and then turn on the phone to enter the recovery mode and flash the machine.

Fixing the screen at startup refers to the phenomenon that the device stops on an interface for a long time and cannot operate normally during the process of booting. The reason for this kind of occurrence is usually due to the loss of system files in the fuselage, the temporary abnormality of the fuselage system, and the failure of the device to work normally due to root operation.

1. It is recommended to press and hold the power button for about 8-10s to try to boot up;

2. Compare after removing the mobile phone battery and reinstalling it, if there is a surplus mobile phone battery, try to replace the mobile phone battery;

3. It is not excluded that it is caused by the loss of system files or the previous root operation, at this time, it is recommended to go to the after-sales service for further detection and maintenance.

1.Try a different battery 2Place the SIM card.

Remove the SD card at the same time and try to boot it again. 3.The boot screen appears when the computer is turned on, and you can try to enter safe mode.

When the boot screen appears during normal boot, press the menu button in the lower left corner until you enter the safe mode (there is a safe mode after entering); If you enter safe mode, try to back up your personal data (**book, SMS, **, etc.) and restore it to factory settings.

See if the phone can be restored.

The main factors that the mobile phone cannot be turned on are the battery, mobile phone software, and hardware that will cause the failure to turn on. We recommend that you do the following:

1. Charge with wire for a period of time and try to turn it on.

2. Take out the SIM card and SD card at the same time, and then press the power button for more than 10 seconds to test whether it can be turned on.

If it still can't be turned on, there may be a problem with the system program or hardware, and it is recommended to send the phone to the nearest service center for testing.

Enter recovery mode and double clearing.

Enter Recovery Mode Method:

Method 1: If the phone is turned on, please turn it off first, remove the battery and then put it on, and in the case of power off, press and hold the power button + home button at the same time until the recovery interface appears.

Method 2: If the above methods cannot be entered, then turn on the computer again, first press and hold the volume + button, and then press and hold the power power button until the recovery interface appears.

Recovery mode (power key OK, volume up and down keys to move), the steps are as follows:

1.Shut down the computer completely (it is best to pick the battery after shutting down), and then enter the recovery interface through the special button combination.

2.Select Wipe Data Factory Reset and press the power button to confirm, and then press Yes with the selected Yes. Then select Wipe Cache Partition and press OK, and select Yes to OK.

If it still doesn't work after double clearing, you can only flash the machine.