What s going on with the Zhongxing 9 satellite?

N North, S South, E East, W West. This is a geostationary satellite.

The way the locations are marked, and a letter is missing, which refers to the latitude and longitude of the earth.

The latitude can only be 0 degrees Huaina, that is, above the equator, and the height is about 36,000 meters. According to this coordinate, and then considering the latitude and longitude of the receiving place, the azimuth and elevation angles of the antenna aimed at the satellite can be calculated through the spherical trigonometry theory.

Longitude: East longitude is positive, west longitude is negative.

Longitude is the dihedral angle formed by the meridian surface and the prime meridian surface of a rough earth.

Prime meridian.

The longitude east of it is called east longitude, and the longitude west of the prime meridian is called west longitude. East longitude is represented by an "e" and west longitude is represented by a "w".

Dimensions: North latitude is positive, southern latitude is negative.

Latitude refers to the line between a point and the center of the Earth's sphere and the Earth's equatorial plane, and its value is between 0 and 90 degrees. The latitude of a point north of the equator is called north latitude and is denoted as n; The latitude of a point located south of the equator is called south latitude and is denoted as s.

Summary. The reasons why the Zhongxing-9 satellite cannot receive the signal are as follows: The strong signal indicates that the line connection is correct and effective, and the high-frequency head and machine are good; A signal quality of 0 indicates that the antenna is not aligned with the satellite; Look at the menu and point the antenna to Zhongxing 9, slowly adjust the elevation angle and azimuth angle, the polarization angle does not need to be adjusted, because it is circular polarization, any azimuth is equivalent; The action should be slow, the amplitude should be small, because the digital machine is aligned and it takes a process to react, about seconds, watch the signal strength become larger, slowly have quality, the quality bar becomes green, and the antenna is fixed when it is maximum, you can watch TV!

What's going on with the Zhongxing-9 satellite not receiving a signal.

The reasons why the Zhongxing-9 satellite cannot receive the signal are as follows: The strong signal indicates that the line connection is correct and effective, and the high-frequency head and machine are good; A signal quality of 0 indicates that the antenna is not aligned with the satellite; Look at the menu and point the antenna to Zhongxing 9, slowly adjust the elevation angle and azimuth angle, the polarization angle does not need to be adjusted, because it is circular polarization, any azimuth is equivalent; The action should be slow, the amplitude should be small, because the digital machine is aligned and it takes a process to react, about seconds, watch the signal strength become larger, slowly have quality, the quality bar becomes green, and the antenna is fixed when it is maximum, you can watch TV!

How to install. You haven't installed it yet? Where have we got, dear?

I don't know what the direction of the pot is when I just connected it.

Degree. There's no fixed power for this, dear.

The action should be slow, the amplitude should be small, because the digital machine is aligned and it takes a process to react, about seconds, watch the signal strength become larger, slowly have quality, the quality bar becomes green, and the antenna is fixed when it is maximum, you can watch TV!

This requires one person to adjust the signal outside, and the other person to check the strength of the signal on the TV.

To adjust to the optimal position of the signal, just fix the external signal receiver.

What does right-handed left-handed mean.

It's what it means to move left and right, dear.

What to do if the signal is always 0.

Change direction and try it, dear.

What is the cause of the data receiving failure?

The satellite pot cannot receive the signal because the position is wrong or the signal line is not connected properly. Adjustment method: 1. Press the F3 button of the remote control to adjust the star button.

2. Squat behind the small pot and slowly rotate the chassis first to maximize the signal quality. 3. Adjust the elevation angle to maximize the signal quality. 4. If the signal quality has not been improved; It is necessary to check whether the polarization direction of the high-frequency head is correct to ensure that the 0 scale is directly upward; Make sure that the elevation angle of the cauldron is maintained at an approximate angle of 15 degrees behind the vertical deviation; Make sure that the horizontal direction is approximately 43 degrees west-south.

5. Due to the differences in different geographical locations, the small pot should be adjusted slowly and carefully.