-
Anonymous users2024-02-15The tips for catching dolls are as follows:
1. Try to catch. Try to catch it first, if it's the kind of shaking that isn't too big, and the claws aren't shaking much, congratulations, there's a play.
2. Choose a good location.
Usually, the area around the hole is the area with the highest hit rate of catching dolls, followed by the outer circle. Of course, it is also necessary to observe whether the posture is correct, to see if the object to be grasped is angular, and it is best to get stuck in the claws.
3. Push down. If the position is average, then pushing the doll down is a very practical technique. Especially like a larger doll, it is best to grasp it from the doll's body and neck, if you clamp it from the head of the sitting doll, the clip has no grip point, and the doll can easily fall off.
The method is to drop the clamp a little bit, so that one claw is on the doll's head, and the other two paws grasp the doll's body obliquely.
4. Shake and grab. If there is no obstacle next to the target doll, throw the clip left and right, let the clip swing sharply from side to side, find a good time to press the drop button, and when the claw clamps the doll to retract, it will throw the doll to the exit.
-
Anonymous users2024-02-141. Observation.
Every time I go to the crane machine.
At the time, it is not for no purpose to put coins to clip, so most of them can not be clipped, observe which crane machine is someone in the clip, and leave without clipping. Such, you can go on.
Another way, that is, if someone else is holding the doll you want, don't clip it. Because 99% of the crane machines like this are programmed, as long as one is clamped, the program will start from scratch. Unless you fill in the coins from scratch.
Or, you're lucky, the clamp hangs on the rope, this kind of stepping on shit luck.
things. <>
2. Determine the location.
You can press the button next to the joystick to lower the claw, and when you go down the claw, you have to press the button again to see the claw reach the doll's body or half of the head (this is the key, and it is also the direct reason why many people grab the claw and release it), and then the claw will come up with the doll, you just have to wait.
Tip: The second press is to increase the power of the claw, and the reason is that you know the fundamental difference between pressing once and twice.
3. If the doll you catch is near the exit of the baffle, as long as you catch the doll within 3 times according to what I said, you will definitely be able to come out, if the doll you want is far away.
It's repeated a few times like this, but it's just a process of moving the doll slowly, moving little by little, and when it comes to the exit of the baffle, there must be a doll within 3 times.
-
Anonymous users2024-02-13Summary. 07 Smooth material doll grasp carefully, this skill involves the problem of the doll's external materials. In fact, it is very simple, some relatively smooth fabrics, such as silk type, this kind of material itself is relatively smooth, even if the clip is clamped, considering the tightness of the clip, it may be slippery, so if you think this thing is particularly smooth, then be careful.
08 Identify one, step by step: This technique is also commonly used, a cabinet will look at a certain style of doll, but not in the hole, the position is not good or even in the innermost far away from the hole, what to do? The way is to catch a few more times on the premise that you think it is worthwhile, use the previous skills, prepare for the next step every time you catch, and even catch other dolls to build bridges for the doll you want to clip to improve the success rate.
Operation method 01 to grasp the machine with 2 layers of dolls, do not catch the machine with fewer dolls, when grabbing the doll, let the slip aim at a narrow place to grasp, such as the head and neck, if it is a big doll, grab the limbs, especially those dolls with embellishments on the limbs, sometimes, a flower on the big doll can be the focus point. 02 Don't catch it during the New Year's holidays, the merchant will do tricks and feet on the crane machine, and the probability of grabbing the doll is low. 03 Don't grab the hot machine (the crane machine with high frequency of use) Hengshen, because the more times you catch it, the coil in the mechanical arm of the crane machine will be hot, soft, and the strength is insufficient, and it is difficult to catch.
04 Observe the shape of the claws in the crane machine, the claws have two claws that imitate hunger and one claw does not grasp (too high technical requirements), and there are three claws that can be grasped (more stable). 05 Each crane machine can be divided into many areas. Of all the wards and domains, the area near the entrance of the cave has the highest success rate!
It's close to the water. Next to the hole, basically as long as the clip can be clamped up and lifted into the air, the success rate is very high. So first of all, you have to see if there is a doll in a good position around the hole of this crane machine.
If not, look at other areas. 06 Be patient and determined, don't be in a hurry in the process of grasping, take your time, read which doll you like and catch it, don't waver and be indecisive.
07 Smooth material doll grasp carefully, this skill involves the problem of the doll's external materials. In fact, it is very simple, some relatively smooth fabrics, such as silk type, this kind of material itself is relatively smooth, even if the clip is clamped, considering the tightness of the clip, it may be slippery, so if you think this thing is particularly smooth, then be careful. 08 recognize the digging and balance one, and break it step by step:
This technique is also commonly used, a cabinet rubber file on a certain style of doll, but not in the hole beam scattered, the position is not good or even in the innermost far away from the hole, what to do? The way is to catch a few more times on the premise that you think it is worthwhile, use the previous skills, prepare for the next step every time you catch, and even catch other dolls to build bridges for the doll you want to clip to improve the success rate.
The above is the method of sorting out the doll catching skills.
-
Anonymous users2024-02-12Here are some tips for catching a crane machine:
1. Observe the crane machine: Before catching the crane machine, you need to observe the crane machine first. Take a look at the gripping strength of the machine, determine the position of the gripping equipment and the position of the doll, so that you can better strive to grab the doll at one time.
2. Grab under the condition that the machine is stable: try to wait until the crane machine is stable and the grabbing equipment is relatively stable before grabbing the doll. This avoids situations where the doll is not caught due to the machine shaking.
3. Aim at a good position: The key to catching a crane machine is to aim at a good position. You need to determine the position of the doll first, and then find the best gripping position within the control of the machine.
4. The position of the grabbing doll: The position of the grabbing doll is very important. To successfully catch the doll, you need to aim exactly at the right position, and it is usually necessary to move the gripping device several times to determine the best position.
5. Choose the size of the doll: Choosing the size of the doll is also a very important skill. The weight of a large doll is more difficult to grasp, while a small doll is prone to passing by while grabbing. Generally speaking, choosing a doll with a moderate size can increase the success rate.
6. Look at the time when grabbing: In the process of grabbing the crane machine, you need to look at the time. If you don't have enough time, you need to grab it as soon as possible or just compromise it. If you have enough time, there are more opportunities.
Here are a few points you should pay attention to when playing with a claw machine::
1. Observe the grabbing method of the machine: Before playing with the claw machine, you need to observe the grabbing method of the machine and the strength of grabbing the doll. This allows for better selection of the best gripping locations and increases the success rate.
2. Choose a target doll that suits you: Choose the doll you like and want, or you can choose the target according to the difficulty of the machine. If you are a beginner, you can choose some cheap dolls to practice grabbing skills first.
3. Aim at a good position: When playing with a crane machine, it is crucial to aim at a good position. You need to determine the position of the doll first, and then find the best gripping position within the control of the machine.
4. Pay attention to the operation time of the machine: when you enter the crane machine, you must pay attention to the operation time of the machine Zen lifter, and do not exceed the specified time, so as not to waste time and money.
5. Don't wait until the last second to let go: When there are ten seconds left in the countdown to grab the claw machine, it's best to start preparing to grab. Because when the time of the machine is almost up, it may become unstable and need to be grabbed in advance. And waiting until the last second to let go has a smaller chance of success.
6. Exercise patience and skills: Catching a doll laughing and arguing requires practice and patience, don't be in a hurry. Practice more, gradually master the grasping methods and skills, and you can improve the success rate after you have experience. <>
1. Don't rush it. It is estimated that most of the little girls have a soft spot for the cute little dolls, as soon as they see the little dolls, they can't walk, especially when they see the mountains of dolls in the doll machine, and only spend 1 yuan to get a doll opportunity, it's really good, when there is such an idea, you must be calm, you have to analyze, the doll machine as a profitable entertainment machine, the demand is greater than the pay, that is, put 50 dolls in the machine if you can't earn more than 5 times the profit, it doesn't do, so, In the face of the crane machine, you must be calm, you must invest money to catch the crane machine if you don't see it, that will only make your money drift 2, pay attention to observation, what to observe? 2 aspects, observe the condition of the machine and equipment, don't be impulsive to catch, see how others catch, when others catch the situation of the mechanical claw shaking, if the mechanical claw shaking is intense, it is recommended not to be nostalgic for this machine, because the grip of the claw is insufficient, and the back and forth shaking undoubtedly increases the difficulty of catching the little doll, the most important thing is that if the shaking is violent, when you are ready to claw, it does not stop, it will seriously affect the accuracy of catching the doll, and it is very likely to hit the situation of which point; Another one to observe the placement of the doll, pay attention, not the doll you like will definitely be able to catch out, because the grip of the mechanical claw is insufficient, therefore, as long as the little doll is pressed or squeezed, it will cause you to be unable to catch it, so, before grabbing, be sure to see if the target is pressed and squeezed 3, grab the doll to choose the middle area or near the exit, sometimes you will find that the doll around the glass wall of the doll machine is more beautiful than the middle zone, don't be fooled at this time, Don't grab the dolls around, because the top of the mechanical claw is its mechanical and circuit part, when the mechanical claw runs around, you will find that because of the space problem, the mechanical claw is not close to the glass wall, 4, don't go over the mountains and mountains, sometimes you will find that there will be a doll that can be caught in the middle of the area, don't scratch, because even if you successfully grab it, when you come back, it will be because of the height of the problem that the doll that has been caught will eventually fall due to the doll below the doll. The problem of the size of the doll, the big doll can not be caught, the heavier it is, whether it can be caught is one thing, even if it is caught, it is also dragged away, on the small power of the mechanical claw, you still don't grasp the big one, visually, find some mechanical claw one claw can be the doll as a whole or 2 3 parts of the doll to catch, the probability of success will be very high 6, the problem of the size of the mechanical claw, play more, find different doll machines, the size of the mechanical claw is different, needless to say, just observe carefully, choose the big claw machine to play, it's okay 7, skillful, sometimes the doll will be near the exit, in fact, it's very easy at this time, even if you pay a little more, it doesn't matter, because such a doll can roll off with a few pulls with mechanical claws.
Shake the lever from side to side so that the hook also rocks from side to side, and press the button at the right time. The hook will still sway from side to side as it goes down, but our ultimate goal is to see the base of the claw as shown in Figure 3"Blue dots", but the paw grabbed the doll. What is said here"The right timing"It is the most technical in the whole process, but it is not difficult for people who often play games or react quickly, and ordinary people don't worry, the big deal is to spend three dollars to practice to find experience, and remember which angle is the best.
Basically, once three or four times, you can grasp it relatively firmly, and after finding the pattern, you can catch it by firmly grasping this opportunity, provided that you need to find the pattern. It costs a bit of money.
To catch a live chicken, you can use this method to sprinkle some grain on the ground first, and then step on the chicken's feet when the chickens are bowing their heads to eat the grain, so that it is easy to catch the chicken.
1.If there are snaps on the back of the skirt, you need to unfasten the snaps first to detach the skirt from Barbie's body. >>>More