Is it necessary to replace the windows installed by the developer?

There is no noise, if there is a problem, it is recommended to replace it with a better one, but the appearance and the original must be unified, aluminum profile.

The strength, thickness and treatment of the surface coating, whether the thickness of the glass is standard, insulating glass.

Whether the internal filling is qualified (mainly to remove moisture), for high-rises, many properties are not allowed to do outward windows, if replaced, it is recommended to do inward opening and inverted windows.

Because the inward-opening and inverted windows can take into account the performance of sealing, sound insulation, and safety. In order to save costs, most of the raw materials used in the doors and windows used in some low-grade residential areas are ordinary building profiles, which are resistant to wind pressure difference and are easy to deform and damage when blown by strong winds.

<> replace broken bridge aluminum doors and windows.

Generally selected in the early stage of decoration, it generally takes 7-10 days from measurement to installation, and other indoor decoration construction will not produce conflicts, and with the decoration progress, the damage to the walls around the doors and windows generated in the replacement process, the doors and windows selected by the general large developers are more formal, profiles, glass, hardware are in line with national standards, but some small manufacturers on the market, easy to cut corners, the nylon strip of broken bridge aluminum is replaced with PVC, and the middle of the inner frame of the thick outer frame of the profile is a hollow cavity. There is a diversion groove, sound insulation, heat insulation and water seepage water, including a black nylon heat insulation strip in the middle, which is not an ordinary plastic, it is resistant to 300 degrees of high temperature, and with many cavities inside, that is, most of the window frames are blocked. If it is to be replaced, it may be necessary to remove the window sill plate or remove the window cover. The impact of this is relatively large, so it is not cost-effective to replace.

Check whether it affects the use, the developer installed the plastic steel windows.

Generally, it is relatively dense, and if it does not affect the use, try not to change. It is the use of polyvinyl chloride.

It is made by pressing and resin as a raw material, and then adding trough steel in the middle to make the profile of plastic steel window that we commonly see. Because plastic steel doors and windows are plastic products, the thermal insulation performance is still good, but its performance in weather resistance is extremely poor, and it is easy to turn yellow, deformed, and even crack after a few years.

It is necessary to replace the windows of the balcony, but not the other windows. The materials of the windows used by the developer are relatively reliable, and the glass is double-layered, and the sound insulation effect is also good. You don't need to replace it.

Anyway, my house has been replaced, and the windows installed by the developer are leaking, and I usually don't think it's like that, but when it comes to the change of season, it feels very obvious. And the material is not good, and it sags after a long time.

There is no need to replace the windows installed by the developer, because the quality of the windows installed by the developer can still be guaranteed.

If the developer gives you a broken aluminum window or a better quality double-layer three-layer window, it is really recommended not to change it! Because the quality of this kind of window is really acceptable, if you spend more money, it is really an unnecessary expense. But if you encounter the kind of "black-hearted" developer who gives you plastic steel, especially narrow double-glaze, you have certain requirements for sound insulation and insulation, you can consider changing to a new one.

After all, this kind of built-in window will not satisfy your satisfaction, and it will not be comfortable to use in the future.

As we all know, the security doors, windows, geothermal energy, etc. of new houses are the "standard" of developers. Many people struggle with whether to replace the things that come with these new homes, because we are all worried about the quality, or some of the things that come with us don't match the decoration style and personal needs of our own homes.

First, we have to look at the doors and windows that the developer gave us. What is it made of? If it is a high-end community, it is generally equipped with 50 or 55 aluminum windows. Its strength should be fine, but the silence and heat preservation effect are definitely poor.

Second, it is a plastic steel sliding window and an aluminum alloy sliding window. These two windows still recommend switching to this budget. Because even if we don't replace it, we will install a fence in the future, that is, to prevent children from falling out of the building, so even if you install a fence, let's wait until later to live.

If we find that the window is leaking badly, especially in winter, even if you burn the heat, its temperature will not go up. Moreover, the dust in the house is relatively large, and the silence has almost no effect. So at a later stage, it definitely needs to be replaced.

If the decoration is completed, and then replaced, the cost and construction difficulty are also relatively large. If you have such a budget, it is still recommended to replace a door or window with better performance in the early stage.

Third, look at what kind of environment we live in.

If you are on a big road or intersection, or there are factories, bridges, etc. For doors and windows with high noise, many sound sources, and a lot of dust, it is recommended to replace them with better doors and windows. Because our home is used for living and resting, ordinary sliding windows, including ordinary 55-50 or 50-50 broken bridge aluminum windows, basic heat and sound insulation, etc., are very limited.

It does not guarantee the comfort of our indoor life. So we still have to replace the silent and energy-saving doors and windows.

It is necessary to replace it, because most of the windows sent by the developer are not particularly good, and there will be a situation where the installation is not strict, and replacing them in time will make the house last for a long time, and there will be good safety.

There is no need, because the quality of the windows installed by the developer is also good, and the eyes and walls are well repaired when the windows are replaced, and if they are replaced, it will increase the waste of manpower, material and financial resources to destroy the integrity of the wall.

There is no need, because the quality of the windows sent by the developer is not bad, and the size is relatively appropriate, and there is no need to replace them if there are no special requirements.

It is recommended to replace some of the larger windows in the main living space, such as the living room, dining room, and master bedroom with floor-to-ceiling windows, as well as the guest bedroom and children's room.

When renovating a new house, you must hope that the quality of your decoration will get better and better, but under normal circumstances, the developer will do all the windows in advance. At the time of renovation, it is not necessary to replace the developer's windows. Since most developers will have a certain acceptance when handing over the house, the developer can also do a good job of the exterior wall and ensure the integrity of the wall when making the window.

In addition, the developer also pays great attention to word of mouth, and the quality of most of the windows has reached the national standard. Therefore, if you can not replace it, you will not change it, unless the quality is too poor, in which case it is necessary to replace it.

If you find that the windows installed by the developer cannot be closed tightly when you inspect the house, the hardware also has rust. In addition, the cracks between the gaps are relatively large, and there will be air leakage, which is a quality problem at this time, so you can find the developer in time. In addition, it is necessary to pay attention to the developer, if the selected window material is plastic steel window, then it can also be replaced.

In addition, there is no need to replace it, most of the windows made by developers are still relatively good, and they can also fit the wall, and it will be a waste of time to knock it out and reinstall it yourself. And it is not possible to do it well, which also increases the cost of renovating your own home, so it is not necessary.

Under normal circumstances, the developer will use hardcover to deliver the house when handing over the house, and at this time, the house should be inspected in time. You can ask a professional to check the decoration standards of the house, whether it meets the decoration standards in the contract, and also check whether there are some loopholes in the house. If there is a loophole, you can ask the developer to prompt you to change it, so as to avoid a problematic house after you receive the house.

People attach great importance to decoration in their daily life, but they should also be rational when decorating. This way you can avoid spending a lot of money and it will be able to pack very well.

In general, it is not necessary for the developer to replace the windows. Because the developer has passed the completion acceptance at the time of delivery, most of the window quality is up to national standards. If it is an aluminum alloy window, the glass is thicker, and there is no need to replace it, which can also save a lot of money.

Moreover, developers also pay more attention to the exterior wall and ensure the integrity of the wall when making windows, and if they replace the windows themselves, they need to destroy the integrity first, so that serious denials may even cause water leakage. Unless the quality does not meet the standard, it is necessary to replace.

It is advisable to replace the windows unless one of the following occurs:

1. Cheap accessories: In order to save costs, some developers match the windows with cheap accessories, and the aging of the accessories is likely to lead to rust and fracture over time. If this is the case in your home, it is recommended to replace the windows.

2. Plastic steel window: If the developer arranges a plastic steel window, it is recommended to replace it in this situation, because the plastic steel window has the shortcomings of brittleness, short life and poor fire resistance. In particular, it is not recommended to use plastic steel windows in high-rise residential areas, which are prone to the risk of breakage.

It is recommended to replace it with a broken bridge aluminum window, which has better sound insulation and thermal insulation effect.

3. Doors and windows that are not installed in place: it will lead to air leakage in the window. Good products are also inseparable from high-quality after-sales service and standardized production, which should be reinstalled.

4. Poor quality of sealing strips: because sealing strips are closely related to the air tightness, sound insulation and other functions of doors and windows. Under the exposure to the sun, it is easy to harden and lose its elasticity. This situation should be replaced in time, otherwise it will cause the glass to loosen and lead to potential safety hazards.

It must be replaced, because the developer will generally install some bad windows for the customer in order to complete the task. If it is not replaced, it will gradually crack and age in later life. It has a negative impact on the safety of human life and the safety of property.

It definitely needs to be replaced, and the quality of the windows sent by the general developer is not very good, so you can choose some three-story windows, and you should choose the broken bridge material.

Houses will be handed over with windows, but some owners will question the quality of these windows, and some will replace them according to their preferences.

In the process of renovating a new house, the doors and windows used by the developer are replaced as much as possible, and when buying a house, most developers want to be able to increase the cost of the house. Usually consider directly selling the house doors and windows, but young people should know that the quality of the doors and windows used by the developer is very poor, if you want a better quality, then you must consider changing the doors and windows. In particular, the quality of the entrance door is very poor, although the developer has also spent a certain amount of money, but after a few years of use, you will find that the door used is a little loud.

For many young people in life, when they decorate their houses, they generally know that the entrance door of the house they have purchased is available. If the family is in the case of economic allowability, try to choose to change the entrance door, because the entrance door purchased by the developer is generally only considered to be more affordable, and the quality of the lock cylinder and door used is very poor. If you are not willing to consider changing the door, then you can also consider changing the door lock directly, because it is very necessary to change the door lock when the new house is renovated.

In today's life, many people who live on high floors are prone to whirring noises when it is windy outside in the cold winter, if the windows in the house are not particularly transparent. It will also directly affect the rest of the owners, so many owners will generally consider directly replacing all the windows with broken bridge aluminum windows when decorating. Because the quality of broken bridge aluminum doors and windows will be better, so that when sleeping at night, no matter how noisy the sound can achieve a good reduction in noise.

For most developers, in order to reduce the cost of building a house, the quality of the windows used is generally only a fence built of wire. However, if there are children at home, they will feel that the fence built of wire is very unsafe, so it is necessary to take multi-layer protective measures at home in time.

Of course, it needs to be replaced, because the quality of the developer's doors and windows is not particularly good, and the sound insulation is not particularly good, and there is a high probability that the glass will break.

Generally speaking, developers use plastic steel materials to make windows, and plastic steel doors and windows are to be replaced in the bedroom (it is best to change), because the problem of plastic steel is that it is not so soundproof, and when the rain is heavy, it will more or less seep a little water into the house. It's much better to switch to an open one.

I forgot to replace the doors and windows first when I was decorating, so it was too late to regret it. The windows of the living room and balcony do not need to be replaced, where there is not afraid of sound or a little water, it doesn't matter, and the living room and balcony are large, and the cost of replacing them is not low.

windows that open to the outside.

As for the door, there is nothing left except for a change in the lock cylinder. If the door is open inward, and the property is not allowed to change, you have to wait a year or two before changing to an outward open.

It definitely needs to be replaced, because if you don't, it's possible that the developer will also take advantage of this hole to get directly into your room.