Is the CD ROM of the motherboard driver that I brought with my computer for the system? How do you u

The disc with the motherboard driver when you buy a computer is used to install the driver after you finish building the system, not for you to make the system, you have to make the system before you can use the disc.

The newly bought computer needs to install a driver, and the disk in the computer is not a drive disk, but a system disk. Here's how to install the driver on your computer

Take the installation of the graphics card driver as an example, and prepare the tools: driver wizard and computer.

1. First of all, open the "Driver Genie" program in the red box on the computer desktop, and then enter the next step, as shown in the figure below.

2. Secondly, after completing the above steps, click the "Detect Now" button in the red box and proceed to the next step as shown in the image below.

3. Next, the driver wizard software is detecting the missing drivers, as shown in the figure below.

4. Then, find your computer's graphics card in the red box and click the "Upgrade" button to install the upgraded graphics card driver, as shown in the image below.

5. Finally, after completing the above steps, wait for the installation and upgrade to be completed, and then install the graphics card driver, as shown in the figure below.

The newly bought computer needs to install a driver, not a drive disk, it is a system disk, and the driver method required for computer installation:

2. Install the driver wizard. Open the installation package, and don't just click to install it. Modify the installation path first, and do not place it on the C disk of the system disk, so as not to cause the space of the system disk to be too small. Then click on the install option, cancel all the ticks, and click on one-click installation when you're done.

3. After the installation is completed, click on the driver wizard on the desktop. Open the driver wizard and click Check Now, after the detection, you can see the summary of the previous destruction detection - driver management, which lists how many drivers need to be installed and updated, <>

4. Click on the driver management on the right side of the detection summary, and you can see that there are multiple drivers that need to be installed and have been installed. There are two options in the lower left corner: the stable version and the latest version, choose the stable version, the latest is not necessarily the best, it is good to be stable.

5. Choose the stable version, you can upgrade now, click on the right to regret and upgrade or install, so that you can only upgrade one by one. We can check the ones that need to be installed first, and then click on the one-click installation above, so we don't have to choose one by one.

6. Then wait for all the installation to be completed, click Start in the lower left corner - the small triangle on the right side of the shutdown - re-start. Some drivers can only be installed after restarting, so don't worry if the pop-up installer is normal after booting. Install it and reboot it.

What operating system are you, the newly bought computer generally has a system and a driver, and you don't have to install the driver yourself.

Generally, when you buy a computer, they will give you a drive disk, and if you can't use the driver wizard.

Newly bought computers are generally equipped with drivers, and generally the delivery disk is a computer drive disk.

1. When you buy a computer, you will receive a system drive disk, which is an English interface, and friends who don't understand English can't understand it. Basically, it can be said that there is no use value for the purchaser.

2. It is worthless because after the computer installs the system, it will automatically install the drivers required by all the software of the system, so there is no need to find those systems to install. At present, there is a driver network on the Internet, and there is also a driver wizard software, which automatically detects and installs the driver for users, making this kind of software disk meaningless.

It is generally the driver of the computer motherboard. If there are more than two, there should also be an electronic version of the equipment manual.

The CD that comes with buying a computer is a drive disk.

The CD-ROMs that are shipped by the computer are all drive CDs, and the system CD-ROMs will not be shipped.

The drive disk, the system disk must have Windows XP or 7 written on it

This is the motherboard's drive, and it's the driver on the BIOS motherboard.

Two ways to use it:

1. This method is more commonly used, after putting in the disc, double-click to open the disc letter, it will automatically enter the motherboard driver installation interface, there will be a list of devices that can install the driver, select the required installation, or install them all.

2. If there is no self-start function, you need to enter the device manager, right-click the hardware that needs to install the driver, click Update Driver, and the next step will prompt you to enter the path where the driver is located, then select the directory in the CD.

Hello. First of all, yours has an optical drive. It's *** on the computer. After inserting the disc. You will usually be prompted to run the disc program. If it's a reminder.

The motherboard driver disk contains the drivers of the motherboard chipset, sound card, network card, and if it is an integrated graphics card, it also contains the graphics card driver. The graphics card driver disk is generally only available with a separate graphics card, and it is only suitable for the driver of the graphics card.

All hardware must be installed with the corresponding driver software to work normally, and the disc is used to install the driver.

win7 driver backup folder c: windows system32 driverstore filerepository,Copy this out and install win7 next time you don't need a disc。

If you don't have a driver, your hardware won't be able to function as it should, just like a car without gasoline, only appearance.

There are two kinds of original CD-ROMs, one is the motherboard driver CD, which is the driver of the integrated graphics card, sound card, network card, etc. of the motherboard, which may be removed after the system is reinstalled, resulting in the failure of these parts to be used normally. This disc will help you reinstall the drivers, and of course it will also include the software that came with the motherboard. This disc generally does not come with a system reload.

The other is the original CD of the brand set (that is, a complete set of computers bought back), which not only has a drive disk, but also generally comes with a system reload disk and accompanying software.

To put it simply, it is a system with a reload, and one without a belt. These discs have a great remodeling effect after a computer failure, and they generally need to be well preserved.

The disc sent when the computer is equipped, a disc is the main driver and the graphics card driver, such a disc should be well preserved, his role is.

When you install the original system and can't connect to the network, use it to install.

There are also many integrated drivers on the main version (such as: network card, sound card, graphics card) are not compatible with the drivers on and off the network, and the original main driver is required, or the driver on the CD, so as to avoid the trouble of not needing.

But now everyone uses the ghost system, and the advantage of the ghost system is that it comes with a large number of drivers. Eliminate the trouble caused by users who do not have an Internet connection, find the driver by themselves, or lose the driver disc that is shipped, and try the computer beginner.

System, driver, software.

It can be installed in case of system problems or when drivers and software are lost. The CD-ROM is relatively stable.

When redoing the system, you need to install the motherboard, graphics card, network card, sound card and other drivers, which are all in the CD that was sent when the computer was installed.

Look at what is written on the disc.

If you're an assembly machine, then it's probably a drive or something.

If it is a brand machine, then there should be a system recovery disk (in fact, it is a system disk), and there is software given by others.