DingTalk automatic punch card setting opens the software, can DingTalk automatically punch in

You can directly set the current automatic clock-in function in the setting options of DingTalk, and save the current auto-positioning to obtain the clock-in data.

If you open the software for the quality of Ding Ding's automatic punch card, it seems that you have to set it up in Ding Ding's punch card, but he seems to have turned off this function at the moment, so it can't be carried out.

If you use the punch card setting, you can open the software directly to open the software.

Ding Ding does not automatically punch in, so you need to manually punch in and out yourself.

He shouldn't be able to punch in automatically, it may prompt you to punch in, because this kind of thing is generally not automatic.

DingTalk is not good for automatic punching, and it only allows you to sign in manually.

There is punch-in information in the settings, and there is an automatic punch-in function.

Nail automatic punch card setting open software, his automatic punch card open software is also a better operation and maintenance, here his software is very practical.

Electric automatic transmission car, which you see it in the message of this setting software.

Hello, DingTalk has a quick punch-in function, enter attendance punch-in-settings-my settings-quick punch-in, you can turn on the speed punch-in function, set the fast clock-in time, when you reach the clock-in range specified by the enterprise, after opening DingTalk, it will be automatically punched in, thank you for your support!

OK.

Tool: Mobile phone.

1. Open DingTalk and log in.

2. After entering the DingTalk interface, click on the middle job and select Attendance Punch and Clock.

3. Enter the attendance and punch page interface and click Settings at the bottom.

4. After entering the clock-in setting interface, set up a speedy clock-in in and clock-out for both clock-in and clock-out.

5. After setting up the speed punch-in, opening DingTalk will automatically punch in.

DingTalk doesn't have automatic punching, you have to locate it yourself, and then you have to go to it yourself, because he doesn't have an automatic punch-in function.

No, he has seven kinds of software set up by himself. I won't clock in and out automatically.

In the past, it was possible to change the virtual positioning directly, but now DingTalk has plugged this loophole, and the virtual location cannot be changed, but it can also solve this problem from the physical level.

First of all, you need to have two mobile phones, install DingTalk on the standby machine, and the standby machine will always be placed in the company, set up a scheduled automatic execution program on it, and open DingTalk to punch in at the point. How to achieve it can be asked or private.

Ding Ding can automatically punch in, but in fact he also does it manually, because the software is very complete now, and it will save a lot of manpower and material resources.

This thing can't be automatically clocked in, you need to log in every day, and then check in after logging in, otherwise, he will not have an automatic punch function.

There is no such thing as automatic clock-in, and if it is automatic clock-in, many people will skip class.

You can't set up automatic clock-in today, and facial recognition is required to clock-in.

DingTalk can't automatically punch in, but we can use third-party software punch reminder app to assist, this app is based on Wi-Fi to locate, give you location changes to prompt you set the plan, when you leave or go to the company according to the time period you set, in this time period you contact or disconnect the company's network will help you automatically punch in and out of work or clock-out work, no longer have to worry about you forgetting to punch in after work, or forgetting to calculate overtime, there will be traces!

I always forget to punch in at work, let's teach you how to set up DingTalk Bluetooth automatic punch in.

1. First of all, open the DingTalk software on your mobile phone and click [Workbench] below, as shown in the figure below.

2. Then in the page that opens, click [Attendance], as shown in the following figure.

3. Then in the page that opens, click [Settings] in the lower right corner, as shown in the figure below.

4. Then in the page that opens, click [Attendance Machine Bluetooth Punch In], as shown in the figure below.

5. Finally, in the page that opens, check [Automatic Punch In], as shown in the figure below, and you're done.

<>Let's take a look today to see how you can avoid it if you don't want to be automatically clocked in.

Because we see that DingTalk automatic clock-in requires Bluetooth connection, so don't turn on Bluetooth.

Secondly, we click to enter the check-in interface and select the settings button below.

There is a Bluetooth quick punch card inside, click to enter this.

Then choose automatic clock-in to manual clock-in, which can also avoid us turning on Bluetooth and automatically punching in.

You can also click the shortcut to clock in on the settings screen.

After entering, you can turn off the prompts for quick clock-in and clock-out to avoid automatic clock-in.

Summary: 1. Enter the check-in interface and click the settings button.

2. Select the shortcut punch method to enter.

3. Turn off the quick clock-in and clock-out directly.

4. Or click Bluetooth to quickly punch in and adjust to manual mode.

Summary. Hello dear, I have seen your question and am answering it for you, I hope you can wait a little <>

How to turn off DingTalk automatic punch card.

Hello dear, I have seen your question and am answering it for you, I hope you can wait a little <>

1.First of all, we open DingTalk and click on the working <>

2.Click Attendance, click Settings, and then click Advanced Settings<>3Click the shortcut punch method, check Close to <>

The following describes how to set up DingTalk automatic clock-in:Tools Raw materials: iphone12, DingTalk.

1. Open DingTalk, enter the main interface, and click the workbench below.

2. After entering this interface, click Attendance Punch & Clock.

3. After entering the attendance and clock-in interface, click Settings.

4. After entering this interface, select My Settings.

5. After entering the My Settings interface, you will see a quick punch-in reminder, click on it.

6. After entering the quick clock-in interface, select and turn on the quick clock-in at work, and then set how long it will be automatically turned on before and after work.