What should I do if DingTalk punch card cannot be located, and how can I change the location of Ding

GPS signal positioning can bring a lot of convenience to our lives, but in some remote or complex areas, due to technical limitations, inaccurate positioning problems will inevitably occur, such as the positioning function of DingTalk APP, and when we exclude environmental factors, it is still impossible to locate.

2.The second step is to turn on the Wi-Fi switch, we need to use its deviation correction function in a small area, and it is not necessary to connect to the wireless network.

3.Step 3: Tap to turn on the location function on your phone.

5.Step 5: On the DingTalk homepage, set up the punch-in card and click the icon in the lower right corner.

6.Step 6: On the settings page, select the opening method and start time.

The solution to DingTalk's inability to get the location is:

2. Turn on the Wi-Fi switch, you need to use its deviation correction function in a small range, and you don't have to connect to the wireless network.

3. Tap to turn on the location function on your phone.

5. On the DingTalk homepage, set up punch cards and click the icon in the lower right corner.

6. On the settings page, select the opening method and start time.

The method of changing the position positioning and not being detected is as follows:

Tools: Xiaomi 12 phone, MIUI 13, DingTalk phone settings.

1. Open the main menu of the mobile phone to enter the settings of the hand-friend-type machine, and click to enter the auxiliary function.

2. On the pop-up page, select Location Traversal Service.

3. Select the location you want to cross, and click on the option of renting and digging at any location.

4. Click the settings menu at the top right to set the traversal app list.

5. Return to DingTalk and click on the attendance and punching option, which shows that you can clock in and out normally.

was discovered, so I could only explain to the leader and admit my mistakes.

If it is an extraordinary situation, it is good to use the DingTalk virtual punch card software occasionally, if it is used frequently, how can there be a reason not to get your shoes wet when you walk by the river. Therefore, it is recommended that you use DingTalk to punch in by yourself, which is the safest. How to virtually locate DingTalk without being discovered, the order of operation is very important.

1. Close the DingTalk app for a period of time, then carry out virtual positioning, and then open the DingTalk app to punch in after the positioning is successful, close the DingTalk after DingTalk punching, and then close the virtual positioning, so develop a good habit of "closing the DingTalk after punching in". This can ensure that the location information obtained by the DingTalk background will not be teleported to the company from somewhere, and the shutdown of the DingTalk app here refers to the completion of the killing process.

2. Turn off WiFi. If I do this anti-system, I will probably look at the IP address in addition to checking the GPS positioning. To connect to the company's WiFi, the assigned IP address is on a specific network segment as the key.

If you connect to WiFi at home or elsewhere, the IP address obtained by your mobile phone is different. So it's safer to simply turn off wifi and use a 4G network.

3. There is no need to select the same GPS coordinate for each virtual positioning. Under normal circumstances, there is an error in the positioning of the mobile phone, especially in the office building, the GPS signal is relatively poor, and the drift error will be relatively large, and it may exceed 100 meters. For example, if you are sitting at your own workstation, the specific GPS coordinates obtained at different times must be different.

Therefore, when this rubber key is used for simulated positioning, don't be lazy and choose the same dead GPS coordinate every time, but need to make some offsets appropriately every time.

2. Enter the customized opening position and select the positioning location.

3. After selecting the positioning, the system will generate my virtual opening booth address to upgrade the car, and then open the doppelganger to enter the DingTalk software.

5. In the check-in page, check whether the address is correct, and then punch in.

OK. Because as long as that person checks in, the system will automatically locate the geographical location where it checks in. DingTalk sign-in can keep track of the distribution of field personnel.

Check in to record the time and location, and take photos to punch in. When you sign in, you can select the customers to visit and record the customer visit process. View the check-in footprint.

View the team check-in map, personal check-in footprint, and improve team execution. DingTalk is a multi-terminal platform for free communication and collaboration created by Alibaba Group for Chinese enterprises, providing PC, Web, Mac and mobile versions, supporting file transfer between mobile phones and computers. DingTalk was born from Chinese enterprises to help them improve the communication and collaboration efficiency of Chinese enterprises in an all-round way through systematic solutions (micro-applications).

On May 10, 2019, DingTalk announced that the community, dynamics, and Moments functions similar to the "Moments" function in the software will be suspended for one month. On the evening of February 10, 2020, DingTalk issued a statement saying that it has been repeatedly "PS ** rumor-mongering and slander" recently, and DingTalk has called the police to resolutely investigate the legal responsibility of the rumor-mongers. 2020month3month,DingTalkTVThe version was first launched in dangbei market。

On the morning of April 8, 2020, Ali DingTalk officially released the overseas version of Dingtalklite, which supports Chinese traditional, English, Japanese and other languages and languages, mainly including ** meeting, group live broadcast, chat, schedule and other functions, free for global users during the epidemic.

Hello, dear, I have helped you find the result; , you need to change the positioning of DingTalk punch card, you can follow the steps below:1Open the DingTalk app, enter the "Workbench" page, and click the "Attendance and Clock-in" module.

2.On the check-in page, click the "Location" button to enter the selection page for the location dismantling car. 3.

On the location selection page, you can manually select the location you want to punch in, or you can click the "Retarget" button to let DingTalk re-obtain your current location information. 4.If you need to change the default clock-in location, you can click the "Manage Location" button on the "Location" page to enter the location management page.

5.On the Location Management page, you can add a new location or delete an existing location. 6.

When adding a new Lv Xian location, you will need to enter the location name, address, and latitude and longitude information. 7.If you already have location information, you can modify the location name, address, latitude and longitude, and other information.

8.To delete an existing location, you need to select the location you want to delete and then click the "Delete" button. After the above steps, you can change the positioning of DingTalk.

Summary. 2. Every time you use the virtual punch card, the mark is not changed at the same latitude and longitude, and when it reaches a certain number of times, DingTalk will prompt an abnormality.

DingTalk is invalid to punch in with a virtual location, and there is no card.

That's because DingTalk software has an anti-cheat feature. He scans some cheats while using them.

1. If you change your mobile phone to punch in, you will be recognized as an infrequently used mobile phone and cause a background reminder.

2. Every time you use the virtual punch card, the mark is not changed at the same latitude and longitude, and when it reaches a certain number of times, DingTalk will prompt an abnormality.

3,The virtual fixed grip software you use does not hide the frame,After being detected by the background of DingTalk, it will ask the group to show that you are using illegal address change software to collapse,Please uninstall and then punch in。

Solution 1: Turn on your phone and find it in Settings"Developers.

option"；2. Click"Allow mock locations (virtual locations are allowed).", slide the switch.

The virtual differential location positioning software has a new virtual GPS location, pseudo-hail GPS positioning, virtual positioning, and virtual location technology, which can quickly switch the geographical location of the cracked skin with one click, and camouflage the real-time geographical location of the application and the game.

I hope mine is helpful to you [than heart] [than heart].

Many office workers lose bonuses because of occasional tardiness, so they often ask how to change the check-in location to simulate wifi? Hope it helps. We don't advocate regular use, but it's okay to use it once in a while in special circumstances.

Step 1: First of all, we have to have a mobile phone.

Step 2: Either the software, or a pin to stare at a gadget plug in the phone to change.

Step 4: This is safe and will not be found anytime and anywhere.

Step 5: 19923195305

Relying on a number of innovative functions: mobile phone check-in, wifi punch-in, GPS punch-in, field service, multi-person clock-in at the same time, multi-place attendance synchronization, complex scheduling settings, mobile real-time management, and intelligent reports**, it realizes a new round of attendance revolution in the era of mobile Internet loss. Provide more convenient attendance solutions for small and medium-sized enterprises, so as to achieve leapfrog development from traditional attendance and clocking to management communication.

Employee management. 2. One-click query of personnel information, contract and file management;

3. Under the entry authority, the person in charge or HR can fill in the entry information on behalf of the special employee;

4. Real-time release of corporate training news and courses;

5. The performance appraisal method is configurable;

6. Humanized reminders such as employee regularization, seniority, contract expiration, birthday, etc.;

Mobile Shifts. 2. Support cross-regional setting of different shift rules;

3. Support cross-store and cross-regional shift arrangement;

6. Support the scheduling and distribution of cross-store personnel;

Attendance management. 1. WiFi, GPS, ***, fingerprint, face recognition, Bluetooth punch card, Face++ are available for you to choose;

2. Real-time unified management of attendance and working hours of cross-company, cross-store and cross-type personnel;

3. Attendance settings can be flexibly managed and humanized;

4. Support patrol and field positioning functions, and manage the team more efficiently;

5. Seamless connection between attendance and scheduling to realize the whole process management from planning to process;

6. Support attendance Employee working hours abnormal reminder setting, and work hour compliance can be set in advance

Payroll management. 2. Monthly, quarterly and annual salary details are grasped in one hand;

Data analysis. 1. Provide cross-store, cross-work, and cross-shift complete daily and monthly statistical reports of attendance and working hours

2. Summary of company and department education, age, seniority, married, and pregnant

3. Monthly and annual salary, attendance, working hours, and labor cost analysis of branches, stores, and departments;

4. Multi-store working hours cost split data report and details.

How to change the positioning location of DingTalk punch card without being discovered by the administrator?DingTalk is often used in our daily life to punch in, such as their daily leave, attendance and online classes, etc. However, there is a positioning function in DingTalk, and many users want to know how to change the positioning of DingTalk without being discovered

Now let me tell you how to change the virtual location of DingTalk attendance.

DingTalk attendance how to change the virtual location.

1. Open the mobile phone and enter [Work] and click [Attendance Punching].

2. Click the [punch in] button at the specified time according to the requirements of commuting according to the date of commuting.

Three;Enter the targeting range and click the [Open normally] option. 4. Virtual location software, such as [Freelander] and other software, select the location to change. 5. Change the location according to different virtual software tutorials.

6. Click Modify to confirm and return to DingTalk to complete the punch-in. The above is how to change the positioning position of DingTalk punch card for everyone not to be discovered by the administrator and how to change the virtual location of DingTalk punch and attendance, I hope it can help you Remember to give me praise and likes.

How to change the position positioning when punching in and out of DingTalk without being detected.

1.Background to the problem.

With the development of the Internet, punching has become one of the main ways for many companies to manage attendance. As a commonly used punch-in tool, DingTalk punch-in is also increasingly favored by people. However, due to various reasons, sometimes we may need to fake the location to make our clock-in record look like clock-in in the company, so as to avoid being found out by the leader that we are late or leave early.

2.DingTalk punch-in positioning mechanism.

Before introducing how to fake the location, we need to understand the positioning mechanism of DingTalk punch card. Generally speaking, DingTalk clock-in is to determine the location of the user's muck rock pose through the GPS and base station information of the mobile phone, so if you want to fake the location, we need to bypass this positioning mechanism.

3.Methods of falsifying locations.

Using VPNVPN is a tool that hides the user's real IP address and location. By using a VPN, we can target our IP address to other cities or countries in order to disguise our location. Although this method is relatively reliable, there are certain risks in terms of data security and reliability if it is absolutely necessary** and uses some third-party applications.

Use the Analog Location tool.

An analog positioning tool is an application that can simulate GPS positioning. By running these tools, we can virtualize our location to the specified coordinates for the purpose of location forgery. This method is simple and easy to use, but there is a certain positioning error.

Change your phone's system settings.

Changing the settings of the mobile phone system, turning off the GPS positioning or switching to airplane mode can bypass the positioning mechanism of DingTalk punching and clocking, so as to achieve the purpose of falsifying the location. This method is simple and easy, but there may be a risk of detection. At the same time, changing the system settings of the phone may affect the normal use of other apps.

4.Precautions.

When carrying out the operation of fake location, we need to pay attention to the following:

Avoid clocking in too often to attract the attention of your leader.

When using third-party applications, choose legitimate and reliable software, and ensure the security and reliability of data.

When changing the system settings of the phone, be careful not to affect the normal use of other apps.

When using the analog positioning tool, be aware of the error and try to locate the virtual location near the company.

5.Conclusion.

In conclusion, falsifying locations is not a practice worth advocating, and such operations should only be done when necessary. At the same time, we also try our best to be on time to get to and from work to ensure work efficiency and quality of work.