On the question of choosing enough electric guitar DI box. 20

If it's good, it's the boss's di1, but,But it's more expensive.,Cheap on the behringer.,Generally, synthetic effects have noise reduction functions.,No need to use di.,Unless it's a studio recording, you will use a stabilized power supply and a lot of DI boxes.,Generally you don't need to play synthesizers.,Unless you use a monolith.,DI is just used to level the current to reduce the noise caused by the current.。

Uses: One of the main uses of the DI box, the performance site, the signal of the instrument is directly transmitted to the mixer or sound system through the DI box, and the correct instrument sound can be obtained without the restoration of the instrument speaker; The second purpose is computer recording, the instrument signal is input into the computer sound card through the DI box to obtain the correct instrument sound, if you use computer effects such as guitarrig, you can directly use the computer as a top professional effect.

Principle: The output of the instrument is generally a high-impedance output, which is to obtain high-fidelity details in subtle environments. However, the high impedance input is too high for ordinary mixers and sound cards, and there will be two consequences if you plug it in directly

1. Lose a lot of sound details, 2. Not powerful. Therefore, the DI box is responsible for perfectly restoring the high-impedance sound signal and transmitting it to the mixer or sound card for use.

Other applications :d I box is generally equipped with a pass-through output, mainly used for stage performances, the musician plugs the instrument into the DI box, the DI box is divided into two outputs, one DI signal output to the mixer, to ensure that the tuner gets the correct signal; In addition, the pass-through output can be used to the instrument speakers on the stage, just like the instrument is plugged directly into the speaker, and the musician's habits and adjustments to use the instrument speaker do not need to be modified, and the tuner does not need to set up a microphone in front of the speaker. This is also the reason why many professional sites are equipped with a large number of DI boxes.

There is a joyo, the recent response has been good, you can learn about it!

Yes, the function of DI alone is a balanced signal, so theoretically the function of DI is universal. But don't be a DI box is not a pure DI function, with or without other functions.

Did the landlord find the answer? Ran into the same problem, solve.

Go to the forum and ask the master for advice

The Direct Injection box, abbreviated as the DI box, realizes impedance matching when the electric guitar is inserted into the MIC balance input of the mixer. It is often used in professional recording performances.

Because the timbre of the speakers during the performance is very different from the timbre of the speakers used for rehearsal, the timbre of the performance will change unexpectedly, and the placement of the microphone is difficult to adjust to a reasonable position without a particularly professional tuner and without sufficient time for adjustment. In addition, the difference in microphone performance also has a great impact on timbre. So using a good speaker simulator can solve the above problems, it is equivalent to the guitar speaker you wear with you, and you don't need a microphone to pick up the sound, the timbre is the same everywhere, but professional performances only leave the guitarist with a pickup microphone line, so at this time you need a DI box, unplug the microphone cable and plug it into the DI box.

At the same time, the hand box can be used for monitoring.

If you don't have a microphone, you can use it, and some effects have a balanced output port, so you can make do with it.

I don't know very well about this.

When it comes to guitar (or effect) signals that are high impedance, mixers are signals that require low impedance! This can be used for example from a friend of the forum many years ago! That is, pour water, for example!

If you say, with a spoon, pour the water into the bottle! The mouth of the bottle is smaller than the spoon! That's it!

A spoon is the high impedance signal of a guitar (or an effect), and a bottle is a PA mixer! If you pour water like this, the water will overflow on the edge of the bottle! You can't pour it all into the bottle!

This results in a loss of signal!

Here, everyone will think! That's not easy! If you want to pour all the water from the spoon into the bottle, wouldn't adding a funnel to the mouth of the bottle solve the problem?

Ha ha! Oh, and the DI box is a funnel directly between the guitar (or effect) and the PA connection! Change the unbalanced high impedance sound of the guitar or effects to a balanced low impedance and enter the mixer completely to avoid signal loss!

em07] Speaking of which, I believe you understand the function of DI!

But speaking of which, there is still one more question for everyone! For example, there is no balanced output of DI on pod or GT (except for X3 live)! In this case, do you need another DI box?

Proven in practice! If you're performing or recording, the connection between the effects and the PA is a long line, like 10 meters! Then it's better to have a DI box! But if your line is an ordinary three-meter line! That's no need! Hehe!

Features of this DI box! It can also be used when the bass, keyboard or electronic drum is connected to the PA during the performance!

The DI box has two functions: impedance matching and unbalanced signal to balanced signal. If you don't often have to connect to the mixer to perform, you don't need to buy a separate DI, you can use the speakers that come with the effect to simulate.

The first floor of the balanced signal is very good, I won't explain much, I recommend you to buy the current professional box mold, it is more directly with the box mold, if the performance venue does not have professional audio, you bring a di, it is useless, but the di, xylophone and keyboard into the stage is of great significance.

The DI box generally refers to a box between the direct output of your guitar and the public stereo, which is equivalent to the DI box that can help you try to make your instrument as uniform as possible, reduce the noise, and stabilize the frequency. But only approximately. If it is an electric box folk guitar, it is no problem to connect directly to the DI box, and the equalization can be adjusted on the guitar.

But if it is an electric guitar, it is not recommended to enter the DI directly, or to enter a special guitar stereo, because you still have effects to adjust on the guitar stereo. If the electric guitar goes straight into the di, the tone will be very difficult to manipulate, it will be very difficult to tune and the tone will be distorted.