Shanshui i6 Bluetooth headset can t be connected

1. Press and hold the power button of the Bluetooth headset, which is subject to the Bluetooth headset manual.

2. Turn on the Bluetooth device on your computer or mobile phone, turn on Bluetooth, and wait for the Bluetooth headset to connect automatically.

<>4. If the problem still exists according to the above methods, please bring the purchase invoice, repair card and machine to the Shanshui Service Center for testing.

Yes, it can be paired with an Android phone, at least with my LG Nexus5 without any problems.

Pairing method: Press and hold the power button for about 8 seconds in the shutdown state, then there will be a fast and alternate flashing red and blue light next to the power button, and this time is the state of waiting for pairing. Then turn on the phone's bluetooth, and you can search for "sansui."

i6", tap on it to complete the pairing.

Indicator: The red light flashes slowly when it is not paired after powering on, the red and blue light flashes quickly when waiting for pairing, and the blue light flashes slowly when the pairing is successful. You can't see the indicator light when it's turned off.

Note: Hope to help people who are experiencing the same problem.

The system of mobile phones and other devices needs to be upgraded, and it must support Bluetooth or above. Shanshui i6,I also use it,Support Bluetooth above。

The reasons are: pairing error, re-waking up Bluetooth, phone issues, Bluetooth issues.

1. It may be that there is an error in Bluetooth pairing, or the signal is disconnected due to interference, and it can be used normally after only re-pairing;

2. Put the earbuds back into the charging case, then close the lid again, and then take them out again after a few minutes to try it, which can generally solve the problem;

3. You can turn off the mobile phone and restart it, and then turn the mobile phone back on Bluetooth to connect it.

4. Turn on the Bluetooth of the mobile phone, find the name of the Bluetooth headset and select unpairing, and then repeat the pairing operation to solve the problem;

5. If none of the above methods can solve the problem, it is recommended to contact the after-sales service directly to solve the problem.

First of all, we need to confirm whether the Bluetooth headset has power, and the Bluetooth headset has no sound may also be caused by no power. After all, Bluetooth headsets cannot be used when there is no power. If there is no power, we need to charge the bluetooth headphones.

2.Secondly, when the Bluetooth headset is powered, turn on the Bluetooth headset so that it is in the state of power-on pairing. Then we put the hand.

3.Besides, there's another situation where the drama is more dramatic.

There is no sound from the bluetooth headset, I think you should change it again, and you can change it again.

Bluetooth headset volume adjustment is generally on the device, you see if the volume of your device is very loud sound, the headset is turned on normally, whether the battery is low or it may be broken.

What should I do if there is no sound from the three water blue earphones? I usually have no sound from the landscape blue headphones, I thought you could just tune the sound from the settings.

Hello, I personally recommend that you go directly to the local store for on-the-spot consultation, and what you understand by yourself is the most real.

Dear, yes, Shanshui headphones can be used without Bluetooth, because they are also equipped with a standard audio interface, which can be wired to audio devices, including mobile phones, computers, TVs, etc. If your Shanshui headphones are a version with an audio interface, you can use the included wired cable to connect them to the audio device and use the wired potato slow mode for audio transmission. In this mode, you don't need to use the Bluetooth function, and you can also use the Shanshu mold water earbuds normally.

It should be noted that the method of wired connection is limited by the length and quality of the cable compared to the Bluetooth connection, and the wearing comfort may also be affected. Therefore, when choosing to use a wired connection, it is best to choose a cable that meets your own needs, and pay attention to wearing comfort to ensure the best match between the use effect and comfort.

It may be that the connection method is wrong, or the Bluetooth headset has not entered the pairing state.

The connection between the Bluetooth headset and the mobile phone is as follows:

2. To make the Bluetooth headset in the power-on state, you need to press and hold the switch button of the Bluetooth headset for about 6 seconds.

3. Until the indicator light: blue light and red light flashes alternately and then releases.

4. At this time, the Bluetooth headset and the mobile phone will enter a matching state.

5. After the Bluetooth headset is displayed on the phone, click OK to connect and use.

6. Note that the effective distance between the mobile phone and the Bluetooth headset is within 10 meters.

It should be that this landscape i6 Bluetooth headset has not entered the matching state, so the Xiaomi mobile phone can't find it.

The specific connection method of Xiaomi Mi 4 mobile phone and Shanshui i6 Bluetooth headset is as follows:

2. To make the Shanshui i6 Bluetooth headset power on, you need to press and hold the switch button of the Bluetooth headset for about 3-5 seconds.

3. Until the indicator light: blue light and red light flashes alternately and then releases.

4, at this time, Shanshui i6 tooth earphones and Xiaomi Mi 4 mobile phones will enter a matching state.

5. Note that the distance between the mobile phone and the Bluetooth headset should be within 10 meters.

6, wait for the Xiaomi Mi 4 mobile phone to display the landscape i6 Bluetooth headset, click OK to connect and use.

7. After the successful matching, the sound on the mobile phone will come out through the Bluetooth headset, and the call will be made.

8. Some Bluetooth headsets and mobile phones need to enter a password to pair, generally 0000 or 8888.