How to cast the screen of the computer to the mobile phone, how to cast the screen of the mobile pho

Method steps.

After installing on the computer, we open the software configuration. Match according to your own mobile phone system. Don't choose the wrong one.

Here we see two options, the first is to put the phone on the computer, and the second is to put the computer on the phone.

Of course, we chose the second one, because we were going to put things from the computer on the phone.

The computer projection to the mobile phone can be directly connected to each other, and the connection can be directly transferred to the mobile phone on the computer, and the mobile phone can also be transferred to the computer.

In daily life, many people like to cast their mobile phones to computers, either because the mobile phone screen is too small, or because they want to live broadcast by projecting the mobile phone to the computer. So what method do you use to cast the screen?

How to cast your computer to your phone.

If you are using a Huawei mobile phone, you can connect to the laptop in one of the following four ways:

1. Touch.

1. Turn on the NFC function on the phone and touch the HUAWEI Share tag (or Magic-Link tag) on the back of the phone (near the rear lens) to the HUAWEI SHARE tag (or Magic-Link tag) on the laptop (notebooks without NFC tags can be picked up for free at an officially authorized Huawei store).

2. Some notebook NFC has an antenna built into the touchpad, and there is no NFC tag on the computer, so the connection can be triggered by touching the mobile phone to the notebook trackpad.

3. When the connection between the mobile phone and the laptop is established for the first time, the mobile phone has a user privacy statement, and you need to agree to the user license agreement; If you are not connected for the first time, you only need to confirm it on the PC.

2. Sweep it.

Open PC Manager >> My Phone >> Connect Now, select Scan Code Connect or tap the upper left corner to switch to the Scan Code Connect page, open HUAWEI Browser or Smart Vision on your phone, and scan *** to connect; After successfully scanning the code, click "Connect" on the mobile phone and "Allow" on the notebook according to the prompts.

3. Proximity to the connection.

Turn on WLAN and Bluetooth on the mobile phone, and at the same time open the Computer Manager "My Phone" on the computer to connect immediately, and then directly close to the keyboard and follow the mobile phone prompts to connect successfully.

Fourth, wired connection.

1. This method is only supported in versions and above.

2. The PC Manager version needs to be updated to and above;

3. If you use a docking station adapter to connect the data cable and the PC, make sure that the computer connection port is not only the charging port, otherwise it will not be supported.

Connect the Huawei phone and Huawei PC with a wired connection or data cable, and the phone will be unlocked and the screen is on, and the connection will be successful by following the prompts on the phone.

Mobile phone screen projection smart TV,I believe everyone will operate,So how to project the mobile phone to the computer,Operate the mobile phone screen through the keyboard and mouse。 According to the user's environment, there are different ways to cast the screen, which will be discussed in detail below.

1. Win10 operating system.

If the computer is installed with win10 operating system, then the original ecology supports the mobile phone screen projection function, as long as the mobile phone and the computer are located in the same network segment, the specific operation steps are as follows.

Step1: Open the [Start] menu, select the [Settings] icon on the left side, open the Windows Settings dialog box, and click the [Phone] settings menu as shown in the figure below.

Step 2: After opening the phone settings dialog box, tap [Go to Experience Sharing Settings], as shown in the following figure.

Step 3: After opening the projection settings dialog box, select the [Project to this computer] menu in the function menu on the right, set the projection options, and select [All locations are available] according to the settings shown below.

Step5: After the mobile phone is connected to the computer that can be projected, a dialog box will pop up on the computer to display the PIN code of the connection, and after the mobile phone is entered, the mobile phone screen can be projected to the computer, as shown in the figure below.

2. With the help of third-party software.

If the computer is installed with win7 and other operating systems, it does not support the original ecological projection, and you need to install third-party software, such as the commonly used "Lebo projection", "Leyi screen", "apowersoft", etc.

As long as the devices at both ends are located in the same network segment, after opening the software, find "Projection" in the software interface to connect, and project the mobile phone screen to the computer.

Using the software projection method, you can realize mobile phone screen projection computer, computer screen projection mobile phone, computer screen projection computer, etc., and you can achieve one projection more, as long as the relevant software is installed.

3. Data cable.

The above introduces three ways to project the screen of the mobile phone, among which the use of win10 operating system comes with the projection method is the most convenient, most of the third-party projection software is charged, otherwise there are various restrictions on use.

The screen of the mobile phone can be projected to the computer by using the AirDroid Cast software, which can realize the projection of multiple devices to each other, which is simple to operate, and the connection quality is clear without delay or lag.

Install "AirDroid Cast" on your computer or phone.

Connect the mobile phone and the computer to the same wifi network, and use the mobile phone to enter the nine-digit code on the computer to realize the mobile phone screen projection computer.

In addition, AirDroid Cast can also realize mobile phone screen projection web page, computer screen projection computer, computer control mobile phone and other operations. Basically, it can help you solve all the problems of wireless screen mirroring devices.

Taking Huawei phone as an example, you can use the following steps to cast your Huawei phone to your computer:

Make sure your Huawei phone and computer are connected to the same Wi-Fi network.

Turn on the "Multi-screen Collaboration" feature on your Huawei phone. The specific opening method may vary depending on the model, you can search for "multi-screen collaboration" in the settings or pull down the notification bar to find the "multi-screen collaboration" icon to open it.

After confirming the projection request on your phone, the screen content of your Huawei phone will be displayed on the computer.

Note: If your Huawei phone does not have the "Multi-screen Collaboration" app pre-installed, you can search for it in the HUAWEI App Store**. When using Multi-Screen Collaboration, your computer and Huawei phone need to be connected to the same Wi-Fi network, otherwise you will not be able to cast the screen normally.

1. On the Windows 10 system desktop, right-click the "Start" button in the lower left corner of the desktop, and select the "Settings" menu item in the pop-up menu.

2. In the Windows settings window that opens, click the "System" icon.

3. At this time, the system settings window will be opened, and click the menu item "Project to Youxian This Computer" on the left sidebar.

4. Click the drop-down menu of "With computer and mobile phone can be projected to this computer when you agree" in the right window, and select the "All locations are available" menu item.

5. Next, go to the mobile phone to operate. First of all, the mobile phone should be under the same wifi as the computer, find the "settings" icon on the mobile phone, and click it to enter the settings page of the mobile phone.

8. In the open wireless display page, click the switch behind "Turn on wireless display" to make it on.

9. At this time, you can see the name of the computer on the mobile phone, click on the name of the computer.

1. At this time, a prompt will be displayed in the lower right corner of the computer screen whether to allow the mobile phone to project here, click the "Yes" button.

11. The content of the mobile phone screen will be displayed on the computer screen in a while.

If you want to cast the screen of your mobile phone to the computer, you can use the projection software to cast the screen. AirDroid Cast is easy to use, easy to use, and supports mutual projection between mobile phones, tablets, and computers.

The first step is to install AirDroid Cast projection software on your computer.

The second step is to turn on AirDroid Cast on your phone and computer respectively. Enter the projection on the computer on the mobile phone *** to successfully cast the screen.

In addition, there is another way to dissan the data, which is to connect the mobile phone and the computer to project the screen through the data cable. The wired connection used in this method, compared with the wireless connection, will be more stable and smooth [click**airdroid cast.]