Southwest Petroleum University Mechanical Dynamic Test Technology and Signal Division

Forget friends, what to read Southwest Petroleum, machinery is a garbage, petroleum machinery I asked a senior brother, into what PetroChina, you see that he is not satisfied every year, there are dozens of places to know, machinery is only distributed to the frontier, every day to claw mosquitoes for fun. The salary is not high, where to go to the second school, and it is single, if you don't get a good unit, you will wait to die, and the garbage is very much. His only strength is oil.

Like what Baoji Rotary Machinery Factory, it may be the level they think is the best, and the output value of 6 billion is still okay, compared with PetroChina.

The income is 7,8 thousand, you see where it is, Shanghai, Beijing thousand, there are more people who pick up garbage, the house price in Beijing is 17,000 square meters, and the news also says that it has dropped, before 20,004. Sooner or later, it will rise, a few times the gap of 7,8 thousand, what house to buy, buy a few clothes to wear is not enough, friends on the 3rd floor, don't say that you are in Chengdu thousand. Hehe, unless you are over 30 years old, it is not very good, and Southwest Petroleum can do it.

Machinery or look at Southwest Jiaotong University.

The one on the second floor is just nonsense, and I came out with a monthly income of 7 8 thousand. As the saying goes, the master leads the door to practice in the individual, and the employment channels of Southwest Petroleum are still very broad, mainly because there are many units that come to recruit people when they graduate, and the quality is not lacking in high quality. I've learned the real skills, and I'm going to eat it everywhere!

I'm from the School of Economics and Management of this school, and I don't know about the Polytechnic side, I can only say so much I hope to understand!

You studied petroleum machinery.

In terms of employment, I can only say that you have a great chance of entering the oil unit, and this year is not allocation, who knows if you can get to**.

Wages should not be too low.

It is a double election meeting.

Isn't Chengdu Shennan Chengdu Kemet a gang? Pit customers pit employees! Bribes are all audio and video recordings to threaten reports! Therefore, in Chengdu, the machining circle was blacked, and the scourge of the oil circle was changed.

Southwest Petroleum University has a major in mechanical design, manufacturing and automation, and the professional employment is good, only for male students. It is the ace major in the mechanical and electrical institute.

Mechanical Engineering and Automation.

Training objectives: This major cultivates senior engineering and technical talents who have the basic knowledge and application ability of mechanical design and manufacturing, and can be engaged in mechanical design, manufacturing, management, scientific and technological development, applied research and operation and sales in the field of mechanical engineering in the front line of industrial production. On the basis of mastering the relevant technologies in the field of mechanical engineering, it emphasizes modern design, modern manufacturing, and computer application as the core, and is characterized by oil and gas drilling, production, and gathering and transportation machinery. This major has eight directions: petroleum machinery design and theory, machinery manufacturing and automation, equipment engineering and management, mechatronics, mold CAD CAM, welding process and automation, heavy machinery design, and computer-aided engineering.

Compulsory courses: Electrical Engineering and Electronic Technology, Microcomputer Principles and Applications, CNC Machine Tools, Mechanical Testing Technology, Computer Basics, Mechanical Engineering Materials and Molding Technology, Modern Manufacturing Technology Comprehensive Experiment, Testing and Information Processing Comprehensive Experiment, etc.

Students' further study direction: Students can continue to study mechanical design and theory, mechanical design, manufacturing and automation, engineering mechanics, mechanical and electronic engineering, vehicle engineering, oil and gas well engineering, oil and gas storage and transportation, computer science, testing and measurement technology and instruments, and graduate students in mechanical engineering related directions, and can apply for graduate studies in mechanical engineering, instrumentation, materials engineering and science, engineering mechanics, construction machinery, etc.

Student Employment:

Students can be engaged in the design and manufacturing, scientific and technological development, applied research, production management and operation and sales in the field of mechanical engineering and automation in enterprises and institutions in machinery, petroleum, chemical industry, light industry, transportation, construction, computer, environmental protection, forestry and other industries.

Training object: full-time undergraduate, four-year duration, awarded a bachelor's degree in engineering.

Yes! It is a better major in non-oil majors, and the employment of male students is better than that of female students! It is also one of the several majors that the university enrolls in a book.

Yes! My brother is studying this major!! Kindness. You alright. It seems that the contract rate of this year's 09 graduation is 80%!!

Of course, there are good boys to sign this year.

It's a bit hard for girls.

Isn't Chengdu Shennan Chengdu Kemet a gang? Pit customers pit employees! Bribes are all audio and video recordings to threaten reports! Therefore, in Chengdu, the machining circle was blacked, and the scourge of the oil circle was changed.

In the ranking of petroleum universities, it is still relatively high, but the scope of employment is not very wide and has limitations. The teaching level of teachers in professional courses is high.

I hope you will adopt it.

Question: Poor employment in the mechanical mass industry?

I hope you will adopt it.

The question is that his employment in mechanical engineering is not limited to petroleum, and the employment prospects in other mechanical fields are still good, right?

Other mechanical fields.

Answer: The average salary of master's students in the field of mechanical engineering of Southwest Petroleum University is 6,811 yuan per month, of which 62% of the salary income is in the range of 6,000-8,000 yuan per month, and 25% of the salary income is located in the range of 4,000-6,000 yuan per month. According to the analysis of statistics, the average year-end bonus for master's students in the field of mechanical engineering of Southwest Petroleum University is 13,200 yuan.

I hope you will adopt it.

Mechanical engineering is not bad, quite awesome, it seems that the first prize of the National Science and Technology Award in 09 is the turning head of the Institute of Mechanical and Electrical Engineering. Employment is no problem at all ... It's a pretty good major in our school.

Of course, there is no oil major, but the mechanical major is also good.

I'm from Southwest Petroleum. The employment of mechanical automation is still considerable. The employment rate of my class reached 80 percent.

But you have to learn the stuff in it well, it's technical. At least you have to be able to take the course of mechanical drawing.,After participating in the work.,When I hear that you are learning machinery.,It must be for you to draw.。。。

The employment of general mechanical majors is not bad, what is your fist major at Southwest Petroleum University?

That's how you know about your employment at the school...

Mechanical engineering and automation, process equipment and control engineering and industrial design three majors, of which the control can be mechanical is not bad, interested can go.

Check out the details! ~

Basically, the machine and the control are good, the key is to see what industry you want to engage in in the future, I am learning from the machine, the machine from the three major oils, mainly oil fields, well teams, and petroleum machinery factories, drilling service providers. After graduation, it is mainly to the refinery, and Sinopec is the majority. Relatively speaking, the employment scope of the machine is wider.

The treatment is better than overcontrol.

Machinery has a rich future, employment is very good, the faculty is very strong, many teachers are doctorates, it is an NB major in the school, you have a sense of superiority after you come in.

1. If this major goes out to be skilled workers, if you can transfer to petroleum-related majors, it is best to transfer to petroleum Southwest Petroleum's petroleum engineering is the first in the country, and other petroleum-related majors are also quite nb mixed in petroleum units;

2. The ranking of mechanical engineering (professional degree) of Southwest Petroleum University largely determines the difficulty of the postgraduate examination, and many people will learn about Southwest Petroleum University before choosing to apply for the graduate school of mechanical engineering (professional degree) of Southwest Petroleum University.

It's okay, but if this major goes out, it's all skilled workers.

If you can change to petroleum-related majors, it is best to switch to petroleum.

Southwest Petroleum's petroleum engineering is the first in the country.

Other petroleum-related majors are also quite NB

Mix in an oil unit, buy a house in 5 years, buy a car and buy a house in 8 years.

Of course, I'm talking about mixed general.

If it's fast, the future is limitless!