CPU Motherboard The highest temperature that a hard drive can withstand

CPU: Up to 80 or more, no matter how high it burns out.

Motherboard: 50 is remarkable.

HDD: 50 60

Generally, if the temperature is too high, it will automatically shut down, and now it's okay if you don't turn on the air conditioner.

CPUs generally work well within 70 degrees Celsius.

The temperature of this type of processor like Pentium and AMD's series of processors is very high, and the heat generated by Celeron is relatively low, so if it is not a server, it is still better to use Celeron.

Above the Pentium III copper mine, the CPU is set up with overheating protection, and when the temperature exceeds 70 degrees Celsius, the main frequency will be automatically lowered to protect the CPU, so you don't have to worry about burning.

In the summer, if you don't turn on the air conditioner, you should pay attention to the CPU temperature should not be too high to prevent overheating protection from turning on and reducing the running speed of the system.

If you don't feel at ease, go change to a big fan and apply some silicone to ensure that the game goes smoothly.

Pay attention to the dust in the chassis and check for viruses frequently, both of which will affect the temperature measurement element and prevent temperature measurement errors.

To measure the temperature, press del to enter the BIOS to check and check when the device is turned on.

The motherboard temperature is generally very low, proportional to the CPU temperature, generally 20 to 30 degrees Celsius lower than the CPU, and it will work normally.

If you are worried about the CPU, you can use some software to reduce the temperature of the CPU, such as CPU Cool, etc., which will help you.

The CPU temperature of the Pentium can work at 90 degrees, a good motherboard can withstand 60 degrees, and a good hard disk can work at 60 degrees.

Problems with the host hard drive will not cause the CPU temperature to be too high.

There are several reasons why the CPU temperature is too high:

1. Caused by overclocking, which is the over-demanding work of the machine.

2. Caused by electric fans, this is very common in our lives.

Such as: the fan is damaged, the fan is aging, and the fan has no oil and the speed is slow.

3. Too much or too little silica gel between the CPU and the electric fan.

The CPU and electric fan are not close to the CPU to cool down.

1) Check if the fan in the case is working properly.

2) Clean up the dust inside the chassis (the correct way is to blow the dust with a bicycle pump).

3) Be sure to add thermal grease between the CPU and the heat sink.

4) Put a drop of sewing oil on the bearing of the cooling fan, which can effectively reduce the noise! Don't drop too much, just one drop.

5) If necessary, you can install a high-power CPU fan and buy a radiator with better heat dissipation effect, such as Kyushu Fengshen, etc.

6) Install a case cooling fan (be sure to buy a double ball bearing).

There is strong electromagnetic radiation in the chassis, which is harmful to the human body, it is recommended not to open the case cover for heat dissipation) 7) Move the main unit to good ventilation.

No, the CPU only heats up when it receives too many instructions and runs for a long time.

As for the high temperature, you don't have to worry about this, the motherboard has overheating protection, which will automatically start when the CPU temperature reaches 90 degrees.

Some motherboards are set up with 80% overheat protection.

Reason for installing an SSD: Under the premise of pursuing performance, using an ordinary hard disk, the CPU is not working at full capacity, and the heat dissipation is barely enough. Once you change to an SSD, not only does the CPU occupancy rate be high, but you also keep dealing with other tasks, just like you should have worked for one day and three days off, but you have to work for three days and take one day off, and you can't bear it.

Not only will there be this problem when changing SSD, but there are also people who encounter CPU heating when changing high-performance wireless network cards, and the reason is the same. Therefore, before buying a laptop in the future, you must let the CPU run to full to see if the temperature soars.

2 3 SSD is CPU heating cause:

1. The speed of the hard disk is usually 5400 rpm or 7200 rpm, as long as the computer is working, the hard disk has been in working condition; If the CPU is basically dormant when the workload is low.

2. The hard disk does not have a cooling fan; The CPU has a dedicated cooling fan.

3. The maximum CPU temperature should not exceed 85 degrees, and it is best to control the temperature below 75 degrees 3 3

How to cool down the CPU:

1. Restore the CPU in overclocking to its original state.

2. Test the cooling fan and replace it immediately if it is damaged.

3. Apply the silicone evenly between the CPU and the radiator. If the preceding methods do not solve the problem, you can try to change the CPU. 

There are three reasons why SSDs can cause CPU temperatures to be too high:

1.Overclocking, which causes the CPU to run at excessively high frequencies.

2.This is very common caused by cooling fans. Such as: the fan is damaged, the fan is aging, and the fan has no oil and the speed is slow.

problems with the radiator. For example, there is too much or too little silicone, and the CPU and the heatsink are not tightly attached.

The following steps can be used to resolve the CPU temperature being too high

1. Restore the CPU in overclocking to its original state.

2. Test the cooling fan and replace it immediately if it is damaged.

3. Apply the silicone evenly between the CPU and the radiator.

If the preceding methods do not solve the problem, you can try to change the CPU.

It may be a problem when you disassemble the machine.

I suggest you disassemble it again, you say that you have replaced the silicone, it means that you have removed the heat sink, I suggest that you don't rather the screws of the heat sink be too dead, it will not be loose.

Explained below.

Detect whether it is a problem with the hard disk, and if so, return to the manufacturer for repair. How long have you bought it and is it still under warranty. Generally, it is guaranteed for 3 years.

I was looking to see if there was a problem with the CPU, I didn't clean up the dust for many times, whether there was too much stolen goods in it, and the notebook that had to be cleaned once every six months on average.

You're a notebook! What do you want to do?

There are three reasons why SSDs can cause CPU temperatures to be too high:

Sakura calendar 1, caused by overclocking, so that the CPU runs at too high a frequency. 2.This is very common caused by cooling fans.

Such as: the fan is damaged, the fan is aging, and the fan has no oil and the speed is slow. problems with the radiator.

For example, if there is too much or too little silicone, the CPU and the radiator are not tightly attached.

The solution to the high temperature is as follows:

1. Restore the CPU in overclocking to its original state. 2.Inspect the cooling fan and replace it immediately if it is damaged. 3.Apply the silicone evenly between the CPU and the heatsink. If the preceding methods do not solve the problem, you can try to change the CPU.

There are three reasons why SSDs can cause CPU temperatures to be too high:

1. Caused by overclocking, which makes the CPU run at too high a frequency. 2.This is very common caused by the rejuvenation of cooling fans.

For example, the fan is damaged, the fan is aging, and the fan has no oil and the speed is slow. problems with the radiator.

For example, there is too much or too little silicone, and the CPU and the heatsink are not tightly attached.

The solution to the high temperature is as follows:

1. Restore the CPU in overclocking to its original state. 2.Inspect the cooling fan and replace it immediately if it is damaged. 3.Apply the silicone evenly between the CPU and the heatsink. If the above methods do not solve the problem, you can try to change the CPU to solve the problem.

Categories: Computer, Networking, >> Hardware.

Problem description: I just saved a machine, the hard disk model is ST3160811AS, WestJet 160G serial port, 8M cache, recently installed a hard disk monitoring software HA-HDDLiPro, saying that the hard disk temperature is 47 degrees, the temperature is too high. It also shows a maximum temperature of 52 degrees, I don't know what's going on.

Also,As long as the machine is turned on, the temperature of the hard disk will rise soon,Boot display28 degrees,It will rise to 46 degrees after a while,Generally stable at 47 degrees,Wu Jian can reach up to 50 degrees when playing games。 As long as the socks are turned on, the hard disk light will always be on (it is dim, but it is always on, and it will become very bright when reading a large amount of data).

The temperature of the hard disk of other people's machines is only 43 degrees, and the temperature of their own machines is so high, I have been very distressed.

Analysis of the orange trembling:

1.It depends on how well your case dissipates heat (an important factor).

2.See if your hard drive is rotated high or not.

If the case is well dissipated (such as a 38-degree case), the temperature of the hard disk is about the same.

25 degrees 40 degrees is relatively normal.

But in general, it is best not to exceed 50 degrees!! If it exceeds 50 degrees, you need to figure out how to do it. Such as adding a hard disk fan, etc!!

If it's over 60 degrees, then you have to be careful!! Big question).