How to connect the computer with the road traveler

Updated on technology 2024-08-09
12 answers
  1. Anonymous users2024-02-15

    If you want to use wifi, you have to add a router between the computer and the modem. Use a network cable to connect the modem to the WAN port of the router, and the LAN port of the router to the network port of the computer. The router settings can be accessed by using the browser on the computer to access its management address (there is on the back of the router), and after entering, you can follow the settings wizard prompts.

  2. Anonymous users2024-02-14

    I didn't understand your question, the router is connected to the computer with a network cable.

  3. Anonymous users2024-02-13

    The route traveler is connected to the router as follows:

    Operating tool: vivo X9

    Operating system: Funtouch OS

    Procedure: Browser.

    1. Enter the common address in the mobile browser, enter the "administrator password" on the login page, and log in to the settings page of the secondary router.

    2. Click the "Apply Tube Splitting" option to open the wireless bridging settings of the secondary router.

    3. Click on the "Wireless Bridge" option to enter the "Wireless Bridge" setting.

    4. Run the wireless bridging wizard and click the "Start Setup" button to enter the wireless bridging setup wizard page.

    5. The new version of TPLink router will automatically scan the nearby wireless signal at this time.

    6. In the wireless signal scan result, find and select the wireless signal of the "main router", and enter the wireless password of the main router.

    7. The new version of TPLink router, when setting up wireless bridging, will automatically obtain an IP address from the main router. Record it and use this IP address to manage the router in the future. Sell dates.

    8. If your sub-router does not have this function, then you need to find the "LAN port setting" option in the sub-router and manually modify the IP address of the sub-router.

  4. Anonymous users2024-02-12

    Directly connect a network cable to the LAN port of the router, and connect the cat to the WLAN port with a root cable, and set the route.

  5. Anonymous users2024-02-11

    Just check out the relevant tourist routes.

  6. Anonymous users2024-02-10

    There is an address behind the route, and you can connect to the route by entering it into the browser address bar of your computer.

  7. Anonymous users2024-02-09

    Here's how to set up your wireless router:

    1. Connect the line between the network cable, the router and the computer, and start the computer and the router equipment;

    2. After starting the device, open the browser and enter it in the address bar to enter the wireless router settings interface.

    3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin

    4. Set up step by step according to the setup wizard, choose the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

    5. Enter the password applied for from the network service provider, and go directly to the next step after the input is completed;

    6. Set the wifi password, try to make the alphanumeric combination more complicated and not easy to be rubbed into the network.

    7. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can surf the Internet normally after restarting the router.

  8. Anonymous users2024-02-08

    Turn on the laptop WLAN, fill in the wireless router password, if it is a wired router, you need a network cable to connect.

  9. Anonymous users2024-02-07

    If there is no ban on the network port of the flower, that is, you can connect a switch to surf the Internet, but the premise is that the network you open is not only to support a network port, but also can not support expansion Under normal circumstances, two desktops to access the Internet at the same time in a network port is unlikely, if it is a notebook, that is, just connect a router is multiple notebooks to surf the Internet, the premise is still to have a wireless network card Ha I hope it can help you

  10. Anonymous users2024-02-06

    The two computers can be connected through the network card, and if there is no network card, they can be connected through the serial port, and they can also be connected with the easy drive cable, and they can also be connected by Bluetooth.

  11. Anonymous users2024-02-05

    Introducing 3 methods to you::

    1. Which computer to access the Internet must have at least two network cards to achieve your requirements. Otherwise, only one network port can be plugged into the network cable, and the shared port will not be there.

    2. If it is two notebooks and better. Because they all have wireless network cards. Just share the one that has access to the Internet wirelessly. There are a lot of tools to share online. I'll find this for myself.

    3. It's OK to buy a small switch, less than 100 yuan.

    Worked hard for a long time. . .

  12. Anonymous users2024-02-04

    The installation of the router needs to be configured according to your network environment and Internet access, etc., because the different settings of the environment are different, usually the router installation we will disassemble the machine after receiving the product, which has an instruction manual, and most router manufacturers take into account the user's ability, and give us the form of printing.

    Preparation: Unpack the router, RJ45 network cable port, and a computer or mobile phone.

    Connecting the network cable on the back of the router, usually most users have broadband or optical fiber access, generally we connect the network cable (the head from outside the house to the home, the head from the optical modem) to the back WLAN port of the router, this port is generally the network cable we connect into, and the other LAN ports can be connected to printers, NAS, switches, etc.;

    Use a laptop or mobile phone to turn on the WLAN switch, find a network with the best signal and open in the current network environment (generally this is your WiFi name, you can see whether there is an SSID on the back of your router), and the back of the router will be pasted with a factory label, which generally has a management address, SSID, username, and password (used to log in and manage the wireless router).

    After logging in to the background, choose the Internet mode, most of the routers are ADSL dial-up, dynamic IP, static IP, generally used at home to dial up are ADSL mode to enter the broadband username and password, others do not need to be modified Save it Routing will restart Remember to set security (WEP WPA-PSK2 128-bit encryption) Dynamic IP is generally connected to the higher-level router, and the higher-level router has been dialed, then we don't need to dial up to select this, but remember to turn on DHCP, Failure to do so may result in inability to access the network Static IPs are relatively rare and suitable for professionals.

    When all the above operations are completed, the router password is also set Remember to change two places 1 Router management background username password 2 Router management address In layman's terms, it is to avoid being socially employed.

Related questions
6 answers2024-08-09

The broadband network cable is connected to the WAN port of the router, and the PPPoE is required to dial up, and the static IP is that Telecom or Unicom gives you a fixed IP, or that there is a switch in your corridor to choose to obtain it dynamically.

9 answers2024-08-09

If you use a router to surf the Internet, DNS is the same as the gateway address, that is, the address of the router, which is generally or, and there are but very few. Generally, if you haven't entered the router, it defaults to DHCP is turned on, that is, the machine connected to it is set to automatically obtain, and you can get the network settings. >>>More

4 answers2024-08-09

Connecting to a wireless router is equivalent to connecting to Wi-Fi. >>>More

5 answers2024-08-09

Dormitory mounted routers, tools: first.

1. Desktop Computers, No. >>>More

6 answers2024-08-09

OK. Many emulators support multi-opening, as long as you have enough memory on your computer.