Can a new car with a direct injection engine drive Willis run in agent

Updated on Car 2024-08-05
13 answers
  1. Anonymous users2024-02-15

    Due to processing and assembly errors, the frictional resistance of the moving parts of the new car is always much greater than normal when it starts to run, and the running-in (also known as walking) effect in the early stage of the car will have a great impact on the service life, working reliability and economy of the car. Therefore, the run-in regulations must be strictly implemented when using new cars.

    1. Run-in regulations for new cars within 1000 kilometers:

    1) Never drive at full speed.

    2) - Generally not to drive at a speed of more than 100 km/h.

    3) Avoid driving at high speeds in all gears.

    2) The run-in of the vehicle between 1,000 and 15,000 km: it can be gradually increased to the maximum speed or at the maximum permissible speed of the engine.

    2. After the run-in period, attention should be paid to:

    1) When driving a car with a tachometer and shifting into the approaching high speed, the maximum engine speed allowed for a short time is 5 500 rpm when the pointer reaches the red indication zone at the latest. The maximum permissible speed in each gear is 40 kmh in the first gear, 65 kmh in the second gear, 100 kmh in the third gear, 135 km/h in the fourth gear, and 165 kmh in the fifth gear.

    2) Avoid running the engine at unnecessarily high revs, and switch to high gear early to save fuel and reduce noise.

    3) Do not drive the engine speed too low, and only change to low gear when the engine is working hard.

    4) The speeds and rotational speeds listed in the instructions are only applicable to engines with normal temperatures. When driving cold, do not allow the engine to work at the highest revs, whether in neutral or in other gears.

    5) New tires don't have optimal adhesion when they start with use, so new tires also need to be walked, slower for the first 100 km, and driven with care.

    6) The new brake friction plate also needs to be run-in, in the first 200 kilometers of driving, there is not yet the ideal friction, if the braking effect is slightly worse at this stage, the pressure of the pedal can be appropriately increased. The same applies after each subsequent replacement of the brake pads.

    7) Under possible conditions, the new car should avoid continuous driving for a long time during the run-in period, so as to avoid the engine and chassis parts continue to work for too long, resulting in the aggravation of the wear of the parts, and directly affect the service life of the car. Also avoid running at full load, generally in the first 1000 kilometers of driving, it is best to run below 80% of the rated load. Also, try to avoid driving at high speeds and don't go faster than 70% of the top speed with the throttle open for the first 2,000 km/h.

    8) during the run-in of the new car, the driver should heat up in situ after the new car starts at the beginning, and then start after the water temperature rises to the working temperature range, and should choose a good road surface during driving, and slow down when the road condition is poor; When driving, the throttle should be smaller, the operation should be light, once the engine or chassis sound is found to be abnormal, it should be stopped to check the fault in the embryonic period.

  2. Anonymous users2024-02-14

    It is not recommended to add a new car, wait for 20,000 kilometers before adding it.

  3. Anonymous users2024-02-13

    Cleaning the dirt inside the engine is also used for a little maintenance.

  4. Anonymous users2024-02-12

    The advantage is that the inside of the engine is not dirty after washing, it is more lubricated, and the life is long.

  5. Anonymous users2024-02-11

    Willis Engine Safe and Efficient Cleaning Agent, or cleaning liquid, is a kind of car maintenance products used to clean the internal sludge, carbon deposits, gelatinous and other harmful substances inside the engine, keep the engine clean, enhance the fluidity of the oil, reduce wear and tear, and prolong the service life of the engine.

    Engine internal cleaning agent is to solve the problem of the formation of sludge, gum, carbon deposits, paint film, dirt and other deposits inside the lubrication system and the development of products, it is composed of a variety of components with very strong cleaning ability, is an additive that can automatically clean the internal system of the lubrication system. The cleaning process can be completed by adding the engine cleaning agent to the engine crankcase and flowing with the oil during engine operation, which will dissolve the gum and loosen the deposits that have been bonded together, and then fall off. Deposits such as paint film, carbon deposits, and sludge from piston rings and piston skirts are completely removed.

    The cleaned deposits will be removed by the oil filter with the oil circulation, or deposited in the oil pan and removed when the oil filter and oil pan are replaced and cleaned.

  6. Anonymous users2024-02-10

    Willis Engine Safe & Efficient Cleaner (WA61610A) 1. Quickly and safely decomposes and cleans all sludge and varnish 2. Provides special protection when cleaning 3. Reduces contamination of new engine oil.

  7. Anonymous users2024-02-09

    Hello car owner, this is effective, but it will be corrosive, 50,000 kilometers with a suitable one.

  8. Anonymous users2024-02-08

    Hang the bottle, otherwise add it to the mailbox.

  9. Anonymous users2024-02-07

    Reduces engine wear, reduces greasy and carbon build-up, increases oil life, and maintains vehicle dynamics.

  10. Anonymous users2024-02-06

    This brand was originally imported, but later the general distributor of Yantai Xiangzhi preemptively registered the Chinese "Willis Lion", and as a result, the mainland general distributor fell out with foreign companies, and now it is no longer cooperative. At present, the banquet cover "Mighty Lion" on the market is registered by Yantai Company, and it is a brand that makes its own trouble, and its products are made in China. It's all fakes.

    The 3 troika currently on the market are BJ, Lubang, 3M

  11. Anonymous users2024-02-05

    It's okay to let it go, and if you want to say that there is no pollution at all, then you think it may not, but it's almost negligible.

  12. Anonymous users2024-02-04

    The danger of changing the gas is small, the power is small, and it is difficult to refuel!

    As long as it is an EFI gasoline car, it can be changed.

    Includes in-cylinder direct injection.

    Intelligent car dual-fuel control system, fuel cost saving half, running more cars, pure burning to do the province, there is an arrangement, convenient.

    You can learn about the intelligent car dual-fuel control system car burning methanol pure burning methanol than gas modification safety power better environmental protection fuel cost saving 1 half pure burning methanol to replace the squirrel cage inverter fuel pump.

    Methanol is easy to transport and store.

  13. Anonymous users2024-02-03

    1. Quickly and safely decompose and clean all the sludge and varnish, 2. Provide special protection during cleaning, 3. Reduce the pollution of new engine oil.

Related questions
11 answers2024-08-05

The material used in the spark plug has a decisive impact on the replacement cycle, the mainstream spark plug on the market has copper core, nickel alloy core, platinum core, iridium core, copper core is recommended to be replaced every 2-30,000 kilometers, the cycle of nickel alloy is slightly longer than that of copper core, it can be replaced at about 4-60,000 kilometers, and the spark plug metal characteristics of iridium and platinum core are relatively stable, and the oxidation resistance is good, so the service life will be relatively long, and the platinum core is recommended to be replaced every 80,000 kilometers; The iridium core is recommended to be replaced every 100,000 kilometers. >>>More

17 answers2024-08-05

Engine maintenance needs to comprehensively remove carbon deposits and sludge from blocked oil circuits, fuel injectors, intake valves, etc., and different products can be used for in-depth maintenance of carbon deposits in different parts. If the direct-injection engine has never been maintained for more than 10,000 kilometers, it is recommended to use fuel injector cleaning agent. Inside the engine, it is recommended to use engine anti-wear protector for the maintenance of the oil tank.

10 answers2024-08-05

It's hard to start just these few things, the ignition timing is not accurate, the motor is weak, the cylinder pressure is insufficient and difficult to catch fire, your car has been a few years, and you haven't said it, whether it started like this or slowly, you didn't make it clear, but I want to remind you that the usual driving habits are also very important, step on the clutch and hit the motor when the car is cold in the morning, so that the motor will not drive the gearbox to turn, If you are really in a hurry to get on the road, you must stabilize the throttle with the first gear as far as possible (about 200 meters), Because in the morning, the oil has been refluxed to the oil pan after a night of precipitation, and it is slow because it is good for the oil pressure, and all parts of the machinery have not been fully lubricated, and the water temperature is a little higher and then pull the high speed, which is very good for the service life of the engine. >>>More

7 answers2024-08-05

Petrol or diesel engine for EFI?

19 answers2024-08-05

The impact of engine carbon deposition on the car is still quite large, first of all, to reduce the engine power, that is, to make the power output uneven and gradually decay, in other words, more and more powerless. The second is to increase fuel consumption and increase your financial burden. The third is the difficulty of cold start, that is, the difficulty of ignition, and it is not easy to get on the car. >>>More