Tips for removing seals, how to remove the text on seals?

The seal accidentally left a mark, how to solve this situation when we encounter it again? Next, I will share with you a little trick, I hope it can help you.

1. Use oxidants, solvents, etc. to reduce or remove;

2. Use oxidant: hydrogen peroxide.

Hypochlorous acid, etc., is gently applied to the seal, and then wiped off with a paper towel;

3. For thick paper, soak the stamped place in cold water, take it out within a few minutes, then put it in the freezer layer of the refrigerator, and take it out after the water is dry. Blow it hot with a hair dryer and soak it in warm water for a few minutes, then put it in the freezing layer and wait for the water to condense the paper and dry it;

4. Put a ratio of 1:10 of alcohol and water on the paper, spread a layer of napkins on the top and bottom, air dry naturally, and repeat the above operations to completely remove the seal.

Extended information: Other methods:

1. Water-based ink.

2. It can be reduced or removed with this oxidant, solvent, etc. Vermilion and black are generally oily, and it can be considered that there is no way to remove them.

2. If it is red, it is magenta.

The blue or blue color is generally the water-based color of the stamp pad and can be removed. There are also many ways to remove them, mainly with oxidants: hydrogen peroxide, hypochlorous acid, etc., you can try a few more. Try it elsewhere first so you don't get the book spent.

About ink. Ink clay (also known as ink meat) is a unique treasure of our country's study, whether it is a document signing, or historical relics and gold and stone calligraphy and painting, all need to use ink. It is an indispensable work in the creative activities of calligraphers and painters, and it is a medium to convey the art of seals.

Ink clay is a medium to convey the art of seals, and the quality of the ink directly affects the effect of the artistic expression of seals. Good texture of the ink, seal.

When it comes out, the color is bright and calm, with a three-dimensional sense, and it looks energetic.

When the ink with poor texture is printed, the color is gray or shallow, and some oil stains leach out, making the ink blurry and more ugly.

Here are some tips for removing the seal:

1.Use an oxidizing agent: If the stamp accidentally gets on the color, you can remove it with an oxidizing agent. You can choose hydrogen peroxide, hypochlorous acid, etc. to gently apply to the stamp, and then wipe off with a paper towel.

2.Use solvent: If it is thick paper, you can soak the stamped place in cold water, take it out within a few minutes, then put it in the freezer layer of the refrigerator, take it out after the water is dry, blow it hot with a hair dryer and then soak it in warm water, and take it out to dry after a few minutes.

3.Use alcohol: Put a ratio of 1:10 alcohol and water on the paper, spread a layer of napkins on the top and bottom, and the paper at the stamp will fall off naturally after natural air drying.

4.Use vinegar: Spray a slightly dissolved 1:10 amount of alcohol and water with a watering can, then spread a layer of napkins on top and bottom, and the paper at the stamp will naturally fall off after natural air drying.

5.Use a knife: If the stamp imprint is shallow, you can use a knife to scrape it lightly and tape it off.

6.Use a cream: You can also use a cream to apply to the seal and wipe it off with a paper towel.

It should be noted that when using solvents such as oxidants or alcohol, it is necessary to be careful about the amount used to avoid excessive corrosion of the paper. At the same time, pay attention to safety when using a knife and do not damage the paper.

When you need to pick out the seal, you find that there are words on the seal, and you need to remove these words when you open the stove. But many students don't know yet. So here are some of the words I have compiled about how to remove the stamp from PS for your reference.

1. Open the PSCC2014 software, "File--Open", select the Si Hao Dress up to be processed, open, and copy the layer;

2. "Select--Color Range", click on the red official seal part of the socks with the eyedropper, adjust the "color tolerance", and confirm;

3. Ctrl+J copy and paste layers, turn off copy layers, copy layers, "overlay", and use "Eraser Tool" to erase part of the deducted handwriting;

4. Select the copy layer, "-Fill", fill the "Copy Layer" in white, and remove the text behind the stamp.

Many archives bureaus (museums) have a lot of seals, but many archivists do not know how to clean up the archive seals, according to the relevant regulations of the archives before archiving seals should be cleaned, so how to clean the seals?

1. Soft brush washing: To clean the seal, the seal should first be printed with the seal face up, and then the special cleaning liquid for the seal will be sprayed on the printing surface, and the dirt on the printing surface will be softened, and then brushed with a small soft brush.

2. Cotton swab to remove dirt: When you encounter dirt that is difficult to brush clean from the indented part of the seal, you can use a needle to pick out the dirt inside, or use a cotton swab to remove the dirt in the dead corner, and then brush the seal and put it in a ventilated place to dry.

3. Cleansing water scrubbing: If there is no special cleaner for the seal, you can also use a cotton swab dipped in makeup remover water to scrub the seal, because the nature of the makeup remover water is relatively mild and will not cause damage to the material of the seal.

The above is an introduction to how to clean the seal, in fact, there are many ways to clean the seal, and you can choose the method that suits you.

1. Water-based stamps can be lightened or removed with primary oxidants, solvents, etc. Vermilion and black are generally oily and generally cannot be removed.

2. If it is red, that is, magenta or blue, it is generally the water-based color of the printing pad, which can be removed. There are many ways to remove them, but generally speaking, oxidants, hydrogen peroxide, hypochlorous acid, and so on are used.

1. Water-based stamps can be lightened or removed with primary oxidants, solvents, etc. Vermilion and black are generally oily and generally cannot be removed.

2. If it is used in magenta or blue, it is generally the water and forest color of the printing pad, which can be removed. There are also many ways to remove the foundation of the shed, but generally speaking, oxidants, hydrogen peroxide, hypochlorous acid and so on are still used.

The blue stamp and red stamp on the paper are removed in the same way, and the stamp on the paper is removed in the following way:

1. First of all, spread out the paper with the seal, and apply the wind oil essence slowly and evenly to the seal, do not pour too much, so as not to damage the paper, as shown in the figure below.

2. Wait for 1 minute. Then use a dry cotton cloth to gently wipe the wind oil essence on the stamped area, as shown in the picture below.

3. After wiping the wind oil essence, the paper is slightly lightened as shown in the figure below.

4. When the color becomes lighter, apply wind oil essence to the white paper stained with the seal again, and evenly apply a small amount many times, as shown in the figure below.

5. After waiting for one minute, continue to wipe gently with a rag, as shown in the figure below.

6. After wiping, the seal on the paper will be wiped clean, as shown in the figure below, Qingyu is destroyed, and the seal on the white paper is basically unclear when the wind oil essence is completely volatilized.