How to fix a slight scratch on the laptop shell?

Updated on number 2024-08-01
12 answers
  1. Anonymous users2024-02-15

    LCD screen scratches.

    The first method is the pencil eraser method: the surface of the LCD screen will generally be pasted with polarized light.

    membrane, the small scratches we often see are actually on it. In order not to cause excessive damage, we must pay attention to detail when dealing with scratches. We should clean the corresponding screen area before dealing with scratches, do not use tap water and mineral water, it will damage the screen with impurities in the middle.

    Use a soft cotton cloth or mirror cloth dipped in filtered distilled water.

    Wipe the screen lightly. Then find a white pencil eraser and notice how new and soft it is. Use an eraser to wipe in the direction of the scratch, and the force must be light until the scratch is completely gone.

    LCD screen scratches.

    The second method is to wipe with white vinegar: maybe some friends will use alcohol to wipe the scratches, but because the alcohol concentration is worse than our grasp, it is easy to corrode the polarizing film. It is recommended not to use alcohol or other detergents.

    Using the white vinegar in your home, mix it with distilled water in a 1:1 ratio. Then fold it with a soft cotton cloth and then dip it in a white vinegar solution, scratching the screen by moving in a circular motion.

    way to make a light wipe. We can eliminate it by increasing the concentration of white vinegar, and also apply a little pressure when wiping but not too much. After the scratches disappear, they must also be cleaned with distilled water, the white vinegar solution must be removed, and the remaining liquid should be blotted dry.

    LCD screen scratches.

    The third method is toothpaste with petroleum jelly.

    Wipe method: The last method is to use toothpaste to wipe screen scratches, which generally contain abrasives, which belong to calcium carbonate.

    It is a diamond-shaped tiny particle that smooths out scratches like sandpaper. If you are worried that it will have secondary damage to the LCD screen, you can also choose petroleum jelly with oily ingredients. The tools used to apply Vaseline do not require a cotton cloth, and you can apply it to the scratches with your fingers for a little longer.

    Finally, wipe off Vaseline with a damp cotton cloth, and you will find that after wiping with Vaseline, the screen will become bright and shiny.

  2. Anonymous users2024-02-14

    You can apply the film, in fact, there is no need to care too much about the flaws, the computer is used for it, and it will be obsolete in a few years, so just protect the screen at ordinary times.

  3. Anonymous users2024-02-13

    Brother, this situation is generally not very easy to fix, unless you change the shell of the computer, but changing the shell of the computer requires disassembly. At this time, as a friend with obsessive-compulsive disorder, it is definitely unacceptable.

    But there is another way to block it, this aspect is also very simple, you can look at the stickers of the computer shell, you can buy a sticker you like, paste the entire shell, and fill the scar and change the style of the computer, you can also better protect the computer, ** is not very expensive.

  4. Anonymous users2024-02-12

    You can buy some glue and squeeze them inside.

  5. Anonymous users2024-02-11

    Method 1: Pencil Eraser Generally speaking, a layer of film is pasted on the surface of the LCD screen, which is called polarization.

    Membrane. Small scratches are common on it, so you need to pay attention to some details when dealing with scratches to avoid causing more damage. Scratched screen areas need to be cleaned before getting their hands dirty, and it is better not to use tap water and mineral water, as they are in the middle of the platform.

    There are impurities that will damage the screen during the subsequent wiping process. It is recommended to use filtered distilled water.

    Dip a soft cotton cloth or mirror cloth into the screen and gently wipe the screen. If you use an old eraser, it will contain pencil slag, which will cause greater damage to the screen. Use an eraser to wipe in the direction of the scratch, and the force point should be light, until the scratch is completely gone.

    Method 2: Wipe with white vinegarSome friends may think of using alcohol to erase scratches, but the general alcohol concentration is relatively high.

    It will cause corrosion to the polarizing film, and it is difficult to grasp the solution ratio if it is diluted, so it is recommended not to use alcohol or other cleaning agents. The ideal way to do this is to use the white vinegar that is commonly found at home and mix it with distilled water in a 1:1 ratio.

    Then fold the soft cotton cloth, dip it in the white vinegar solution, and gently wipe it. If the scratch is not easy to remove, you can increase the concentration of white vinegar a little and apply some pressure to wipe it, remembering not to use too much force. When the scratches disappear, you must also use another cotton cloth dipped in distilled water to clean the wiping area, clean off the white vinegar solution, and finally blot the remaining liquid dry.

    Method 3: Toothpaste with Vaseline.

    Another way is to use toothpaste to wipe screen scratches, but commercially available toothpastes contain abrasives, which are calcium carbonates.

    It is a diamond-shaped tiny particle that smooths out scratches like sandpaper. If you are worried that it will damage the LCD screen twice, you can also choose petroleum jelly with oily ingredients. The tool for applying Vaseline, you don't need a cotton cloth, you can apply it to the scratch with your fingers, and you can apply it for a little longer.

    Then wipe off the Vaseline with a damp cotton cloth, and you will find that after wiping it with a few Shilin, the screen will become bright and shiny.

  6. Anonymous users2024-02-10

    Summary. Hello 1, using a pencil eraser, usually, a thin film is attached to the surface of the LCD screen, which is called a polarizing film. Common small scratches will appear on it, so there are some details that need to be paid attention to when dealing with scratches to avoid causing more damage.

    To find the white eraser, you must use a new soft eraser. If you use an old eraser, which contains graphite slag from the pencil, this will cause more damage to the screen. Use an eraser to wipe in the direction of the scratch, with light force, until the scratch is completely gone.

    2. Wipe with white vinegar, use the common white vinegar at home, mix it with distilled water at a ratio of 1:1, then fold the soft cotton cloth, and apply the white vinegar solution. If the scratch is not easy to remove, you can increase the concentration of white vinegar and apply a little pressure to wipe it, not too much force, so as not to accidentally damage the screen.

    Can you add, I don't quite understand it.

    Hello 1, using a pencil eraser, usually, a thin film is attached to the surface of the LCD screen, which is called a polarizing film. Common small scratches will appear on it, so there are some details that need to be paid attention to when dealing with scratches to avoid causing more damage. To find the white eraser, you must use a new soft eraser.

    If you use an old eraser, which contains graphite slag from the pencil, this will cause more damage to the screen. Use an eraser to wipe in the direction of the scratch, with light force, until the scratch is completely gone. 2. Wipe with white vinegar, use the common white vinegar at home, and press 1: with distilled water

    Mix in a ratio of 1, then fold a soft cotton cloth and coat with a white vinegar solution. If the scratch is not easy to remove, you can increase the concentration of white vinegar and apply a little pressure to wipe it, not too much force, so as not to accidentally damage the screen.

  7. Anonymous users2024-02-09

    What to do if your laptop case is broken?

    1. The notebook shell is divided into A shell, B shell, C shell and D shell.

    2. Different shells can be replaced separately if damaged.

    3. The original quality back shell is better guaranteed, and it is recommended to replace the original back shell.

  8. Anonymous users2024-02-08

    It will be used, or the original factory will be repaired and replaced with a new shell (the brand's after-sales points should be able to provide this service).

  9. Anonymous users2024-02-07

    1.First make sure that the shell is broken.

    2.Once you're done, remove the battery from your computer.

    3.After removing the battery, unscrew the screws of the case with a screwdriver and open the case.

    4.After opening the case, find the broken place.

  10. Anonymous users2024-02-06

    I can only make do with it, and if I haven't used it yet, I can return to the field to change my shell.

  11. Anonymous users2024-02-05

    The ABCD shell of the laptop can be replaced, and if you have the ability, you can buy it and replace it yourself, and if you don't understand, you can go to the after-sales service to change it.

  12. Anonymous users2024-02-04

    Summary. Dear <>, I'm happy to answer your <>

    How to deal with scratches on the laptop shell: look at the depth of the scratches on the shell, it can be repaired when it is relatively shallow, use a touch-up paint pen core abrasive paste or buy some of your favorite decorations, stick it on it, cover the scratches, not only is it not ugly, but it is more beautiful. If it's deep, it won't work.

    You'll have to find a professional to deal with it. If the scratches are relatively small, you can also use a softer abrasive cloth to gently polish the scratches, and you can see them clearly. If it is relatively long, the decal will not stick, you can design a relatively large card to stick.

    This not only beautifies, but also makes the scratches invisible. Another more expensive way is to find the manufacturer to replace the shell after sale. <>

    <>Stars] <>

    There are scratches on the laptop shell, what to do?

    Dear <>, I'm happy to answer your <>

    How to deal with scratches on the laptop shell: look at the depth of the scratches on the shell, it can be repaired when it is relatively shallow, use a touch-up paint pen core abrasive paste or buy some of your favorite decorations, stick it on it, cover the scratches, not only is it not ugly, but it is more beautiful. If it's deep, it won't work.

    You'll have to find a professional to deal with it. If the scratches are relatively small, you can also use a softer abrasive cloth to gently polish the scratches, and you can see them clearly. If it is relatively long, the decal will not stick, you can design a relatively large card to stick.

    This not only beautifies, but also makes the scratches invisible. Another more expensive way is to find the manufacturer to replace the shell after sale. <>

    <>Stars] <>

    Extended information: If it is a slight scratch, there is also a small trick is to apply toothpaste to the top and then gently rub it on it with a cloth for a few minutes, so that it will not be so obvious. <>

    <>Stars] <>

Related questions
8 answers2024-08-01

1. Remove the battery on the back of the notebook, connect the computer with only the power adapter, and try to turn on the computer, if the boot is normal, then it is caused by poor battery contact or battery failure. >>>More

5 answers2024-08-01

If the price is low, everyone on the earth knows it, buy Shenzhou. >>>More

8 answers2024-08-01

At present, ASUS** cooperates with Youde.com to launch the "old for new service" (brand is not limited), **old machine can be exchanged for ASUS** vouchers and cash, and the vouchers are used for ASUS** to purchase goods. >>>More

5 answers2024-08-01

At present, the materials of laptop shells are none other than PC BAS, PC-GF20, magnesium alloy and titanium alloy. Among them, "PC ABS" is engineering plastic, which is the most common in laptops, and can be found in almost every book. Or the entire shell, or just the top cover of the screen, or as small as the cover of the memory or hard disk; PC-GF20 can make a metal-like texture, which is difficult for ordinary people to distinguish; And only magnesium alloys and titanium alloys are real metals. >>>More

16 answers2024-08-01

I also want to know.,My computer fell 2 times.,Each time it's 1.2 meters high.,No response.。。。 Underneath is the cement floor.