How many hours are the three classes of Haidian driving school subjects, and how many hours are the

The schedule of subjects in Haidian driving school is based on the driver training and test syllabus.

The content of the road driving skills test in subject 3 generally includes: preparation for getting on the bus, light simulation test, starting, driving in a straight line, adding and decreasing gear operations, changing lanes, pulling over, going straight through the intersection, turning left at the intersection, turning right at the intersection, passing the pedestrian crossing line, passing the school area, passing the bus stop, meeting the car, overtaking, making a U-turn, and driving at night; The content of the safe and civilized driving knowledge test generally includes: safe and civilized driving operation requirements, safe driving knowledge under bad weather and complex road conditions, emergency handling methods such as tire bursts, and disposal knowledge after traffic accidents.

To learn to drive well, I recommend Haidian Driving School, Haidian Driving School focuses on innovation-driven development. In 2016, the company independently developed intelligent teaching auxiliary equipment (also known as "robot coach") and installed it in a training vehicle, which not only unified the teaching standards, reduced the labor intensity of coaches, but also effectively improved the pass rate of student examinations; In 2019, it was included in the "One District, One Port" development plan by Haidian District** to help the scientific and technological innovation and development of Haidian District. At the same time, Haidian Driving School is also the first socialized school in Beijing, the first driving school to independently write the "syllabus", and the only driving school in the driving training industry in the country to take the lead in implementing computer timing training.

The actual operation is 28 class hours a day, 4 hours a day, 7 days are full, and the safety and civilization warning education is 12 class hours and 3 days are full. C1 Subject 3 has a total of 40 hours and 10 hours to complete, but it will have to wait another 10 days before the exam, and the interval between Subjects 2 and 3 is 20 days.

Generally speaking, the duration of Driver's License Subject 3 is usually about 1 to 3 hours.

Driver's license subject 3 refers to the third subject in the driver's test, which mainly tests the driver's operational skills and road safety awareness. The following are the general subject 3 exam contents:

1. Vehicle control skills: Candidates need to demonstrate proficient vehicle control skills, including the correct use of steering wheel, accelerator, brake and clutch, as well as the ability to start smoothly, accelerate, decelerate and stop operations.

2. Lane Changing and Turning: Candidates need to demonstrate proper lane changing and turning skills, including observing blind spots, using light signals, choosing the right lane of travel, and maintaining the correct speed.

3. Reversing and U-turning: Candidates need to demonstrate proficient reversing and U-turn skills, including the correct use of rearview mirrors, observation of the surrounding environment, reverse push-out, and correct adjustment of vehicle position.

4. Familiarity with and observance of traffic rules: Candidates need to demonstrate familiarity with traffic rules, including correctly understanding and abiding by traffic signs, traffic signals and road markings, as well as adapting to different road conditions and traffic environments.

5. Safety awareness and emergency response: Candidates need to demonstrate good safety awareness and emergency response ability, including correctly responding to the sudden wheel shortage incident, warning signals and other drivers' behaviors to ensure driving safety.

Subject 3 Exam Notes

1. Familiarize yourself with the exam requirements: Make sure you have a clear understanding of the exam requirements and marking criteria for subject 3 before the exam. Consult the relevant driving manuals and test guides to know the skills and knowledge you need to demonstrate.

2. Practice and familiarize yourself with the road section: Before the test, practice as much as possible the vehicle control skills and operational requirements of the subject 3 test, especially on the road near the test section. Familiarize yourself with the road signs, traffic signals, and traffic lanes on the test section to adapt to the real driving environment.

3. Pay attention to observation and signal use: During the test, always maintain good observation and concentration of speech. Observe traffic signs, signals, and other vehicle behavior in a timely manner, and use turning smile lights and other appropriate signals to alert you of your intentions.

Subject 3 takes 24 hours. The duration of Driving Licence Subjects 1 to 4 is 12 hours for Subject 1, 16 hours for Subject 2 and 10 hours for Subject 4 respectively. The prescribed time for each lesson is 1 hour, and the teaching time in this 1 hour shall not be less than 45 minutes.

The total credit hours for Courses 1 to 3 are 62 credit hours.

Module 3 generally refers to the road driving skills test. Including getting on the bus, starting, driving in a straight line, adding and decreasing gears, turning left at intersections, turning right at intersections, changing lanes, crossing intersections, pulling over, crossing pedestrian crossing lines, crossing school districts, passing and regretting bus stops, meeting cars, overtaking in front of wide, making a U-turn, and driving at night. Millions of car purchase subsidies.

Module 3: A total of 40 hours of training are required.

Module 2: A total of 26 hours of training are required. There are 2 hours of theoretical knowledge and 24 hours of practical operation, of which 8 hours of training are required for reversing and entering the garage, parking and starting at a fixed point on ramps, driving on a side parking curve, and turning at right angles.

Module 3: A total of 40 hours of training are required. "Road driving skills and common sense of safe and civilized driving" requires 16 hours of training, while the practical operation of road driving skills requires 24 hours of training.

The differences between automatic transmission and manual transmission are as follows:

1. Different control methods:

The manual transmission requires the driver to work with the clutch to shift gears, while the automatic transmission is operated by the transmission according to the set gear ratio, without the need for manual intervention.

2. The driving feeling is different:

The manual transmission emphasizes people's subjective initiative, which can fully arouse the driver's desire to drive and a certain sense of achievement. Automatic transmission, on the other hand, is not much fun to drive, and is practical and labor-saving.

3. There is no substantial difference between the C2 driver's license and the C1 driver's license in terms of test process and content, except for the different vehicles used. The C2 driver's license test uses a small automatic transmission vehicle, and the C1 driver's license test uses a small manual transmission vehicle.

The number of hours in the third semester is the same, and the number of hours in the second semester is 4 hours.

The retake must be taken 15 days later.

1: Precautions for subject 3 exams.

1。Relax, most examiners (police) are serious, but don't be too afraid.

2。Control the speed of the vehicle and keep it at 40km/h.

3。The addition and subtraction should be timely, and it is best not to run to the end in 3rd gear.

4。Keep the following distance away from the car to prevent the vehicle in front from stopping suddenly. (Because there are many test cars on the test day, the examiner will ask for a stop and change people at any time.) ）

5。Be polite to the examiner.

2: Precautions for subject 3 exams.

1. Get on the bus and prepare:

1. Pay attention to the appearance and safety status of the vehicle around the car (to report).

2. Pay attention to the traffic situation behind you when you open the door.

2. Start: 1. Pay attention to the sequence of actions.

2. Before starting the engine, pay attention to the adjustment of the driver's seat, the adjustment of the rearview mirror, and the inspection of the instrument.

3. After the engine starts, the ignition switch should be released in time (if it is not released in time, it will fail for more than three seconds).

4. Starting sequence: 1, step on the clutch 2, hang a gear 3, hit the turn signal 4, release the hand brake 5, observe the left and right traffic conditions through the rearview mirror 6, honk 7, refueling the starting speed does not exceed 2500 rpm).

5. Don't jump when you start.

3. Straight driving:

1. Pay attention not to be too fast (more than 10 kilometers is fine, generally second gear).

2. Pay attention to the rear traffic every 20 seconds.

3. The direction should not deviate (not more than 15 degrees), if there is danger or obstacle ahead, slow down or stop, and not turn.

Fourth, change lanes:

1. Pay attention to the traffic situation in the rear.

2. The speed should be kept at more than 20 kilometers.

3. It is not possible to change lanes continuously.

5. Through the intersection:

1. Pay attention to slow down (below 30 kilometers).

2. Observe the traffic conditions on the left and right.

3. Pay attention to pedestrians and vehicles with priority passing.

4. Vehicles turning left should pay attention to making small turns only at the center point, and vehicles turning right can continue to pass under the condition of ensuring safety.

5. Pay attention to traffic lights (vehicles that have crossed the line when the yellow light is on can continue to pass).

VI. Through crosswalk lines, school areas, and bus stops:

1. Observe the traffic situation on the left and right.

No. The retake must be taken 15 days later.