-
1.First of all, back up the important files in your C drive to other drives, because restoring the system with Ghost is equivalent to formatting the C drive, and everything will be gone.
2.Reboot the computer, press the corresponding key according to the motherboard prompts (delete is the most widely used) to enter the BIOS, change the boots boot option, change the frist boot to optical drive boot (*** CD drive), F10 saving.
3.Put in that disk, exit the BIOS (the system will restart), a Chinese option interface will automatically pop up, you select the first item (fully automatic installation system to C disk), the system installation is completed in about 20 minutes.
4.Now enter the XP system,This jujumao pirate system is still good,A lot of important software has been installed for you,If the version is too old,It is recommended to install the latest after deletion。 Of course, there are still a lot of junk software installed by the class owner in the system, and it is recommended to install 360 security guards to check and delete.
5.Finally, it is possible that your motherboard, graphics card, sound card, etc. are not recognized and installed by this system, don't worry, use the driver CD-ROM of the motherboard and graphics card that you gave you when you bought the computer. If the disk is lost, first connect to the network (the network adapter will be installed 95%), by checking the "Device Manager" does not have the hardware installed (the question mark), select "Automatic update installation driver", the computer will automatically search the Internet for the installation driver.
6.Don't remember that this system is pirated, be sure to turn off the system automatic update function, if you want to patch, use 360 security guard, don't be blacked by Microsoft!
This version of my desktop is used now.,It's not bad.,There's a lot of themes that come with it.,The only fly in the ointment is that there's no Japanese and Korean input function.,It's estimated that most people don't use it! I wish you success!
-
Just like the normal installation method, set up the disc boot and choose how you want to install it.
-
1.Restart and press the del button, after entering, use the up and down keys to select BIOS Enter, press Enter in the selection of frist boot, which displays *** item, and press Enter after selecting (after installing the system, it will be changed to the original hard disk to boot). Then open the optical drive and put it on the system disk, and press F10 to exit the saving.
2.After the disc boots, choose to install the system in the first partition, which is the C drive. Leave the rest alone.
3.Finally, I finished installing it and turned off the automatic update. It is to use the software of the optimization master or something to optimize the system.
360 System Reinstallation Master is a system that does not need to install a CD, does not need a system image or even manual backup of data, just open the "System Reinstallation Master" in the case of networking, and can easily complete the system reinstallation in just over ten minutes. >>>More
Press Del after boot or reboot to enter the BIOS Advanced BIOS Features First Boot Enter Select "CD-ROM" (you can also press Page Up and Page Down to select) Press F10 Press the "Y" key OK Put in the boot disc Boot OK (there are differences in the motherboards, they won't be exactly the same, however, they are much the same). >>>More
The good thing is that the system becomes clean, there are no junk files, it runs faster, and all the problematic files are restored. Generally, Windows should be reinstalled after half a year of use, and it is best to use ghost to back it up after installation, and it will be easier to restore it next time, and it will be done in a few minutes.
Personally, I feel that after the new system is installed, the driver, the problem of common software installation, many of which are set to boot up. You can optimize the next optimization software according to the few upstairs, and it should be no problem. Super Bunny, Windows Optimizer, Almighty Assistant, 360 and everything have this function.
This must be set in the BIOS, now the general computer to enter the BIOS, is booted and pressed the DEL key to enter the BIOS, but there are also some computers to enter the BIOS instead of pressing DEL, such as Intel's motherboard to enter the BIOS is to press F2. The method of entering the BIOS is also different for each notebook: >>>More