How to repair the shiny ironing of clothes? What should I do if I don t pay attention to the shiny r

You can spray some water on the burned area, adjust the temperature to medium temperature, put a layer of cotton cloth on top, and light ironing can restore it to normal. 2. Use a small amount of talcum powder on the surface of the clothes, and after five minutes, adjust the iron to the steam temperature and iron it with a cloth through the clothes, and the clothes can return to their original appearance. 3. When the cotton fabric is not seriously scorched, sprinkle some fine salt and gently rub it.

1. You can spray some water on the burned place, adjust the temperature to medium temperature, put a layer of cotton cloth on it, and slightly iron it to restore it to normal.

2. Use a small amount of talcum powder on the surface of the clothes, and after five minutes, adjust the iron to the steam temperature and iron it with a cloth through the clothes, and the clothes can return to their original appearance.

3. When the cotton fabric is not seriously scorched, sprinkle some fine salt and gently rub it.

4. A little baking soda can be used for silk.

Mix with water to make a thin paste, and it will disappear when it is applied to the scorch.

5. Gently rub the fluff-free area with the tip of a needle until a new fluff is picked up, and then put a damp cloth on the fabric fluff to iron.

6. Dip cotton in a little diluted vinegar.

Wipe along the reflective area to moisten the reflective area, and then put a damp cloth on it and iron it flat.

Ironing: Ironing refers to ironing the fabric by heating the iron. Generally, an iron is used to iron clothes to make them flat. In ancient times, it was called iron, also known as fire bucket and gold bucket. It is generally made of metal, and in ancient times, it was mostly heated by charcoal fire and ironed clothes.

A method of ironing clothes using the pushing pressure of an iron. When the ironing fabric area is large and slightly wrinkled and can be flattened, the method of pushing and ironing is used.

If the amount of hair of the clothes is transported to the warehouse, if it is relatively light, you can adjust the temperature of the iron to Chinese, spray it with some water, and then iron, you can also add an appropriate amount of white vinegar. Make a fix.

Step 1: First of all, if the ironed clothes are black, you can soak them in vinegar.

Step 2: Sprinkle some vinegar on the shiny part of the black clothes to wet evenly, then iron and wash in time after ironing.

Step 3: Spread out the shiny area on the black garment and spray it wet with a watering can. Soak the cotton cloth in a little water and wring it out and put it on a shiny part.

Then press lightly with the iron and lift it immediately, repeating several times until the garment is ironed. It should be noted that the iron cannot be used to drag horizontally. Finally, replace the cotton cloth with kraft paper and cover the clothes and iron them dry.

If the garment is shiny when ironing, you should spray it with some spray water beforehand. Then the dizziness will not shine again.

If the clothes are ironed and shiny, you can directly cover them with a wet towel and re-iron them with a low-temperature iron, so that most of them can be improved, or you can send them directly to the dry cleaners and let the dry cleaners help with them.

It can be diluted with vinegar and water, then sprayed on the garment, and then re-ironed to remove the shine and restore the color of the garment itself. In order to avoid damage to the clothes when re-ironing, you can put a towel in the middle, which can effectively alleviate the damage to the clothes.

re-ironing;

Wipe with vinegar; Rub gently with salt;

Sprinkle with some talcum powder.

You can put the clothes in water to wash them, and then put some laundry detergent or laundry detergent and other things when washing, and the water temperature should be controlled at about 60 degrees.

How about ironing clothes shiny? How about fixing clothes to iron and shine? Repair clothes brewing hot, related to your fabric, and then you have to change an iron, the steam iron will not appear in this situation, that is, the iron is always shiny, when you want to pad a piece of cloth of good luck, a piece will not have this situation.

Clothes are ironing shiny, how to fix your clothes ironing shiny? It doesn't look good, and if you want to be comfortable, you can take a wet towel and rub it on all parts of your clothes, so that it doesn't shine.

You can use a comb to scrape back and forth on the surface of the garment, because when it is hot, it will iron out the hair on it when ironing it, and you can use a comb to scrape back and forth, and it will be frizzy again.

How to fix the shiny ironing of the clothes This is a problem with the fabric If it has been ironed and shiny, it is generally difficult for this fabric to be restored to its original state.

You can spray some water on the burned area, adjust the steam to medium temperature, and you can also use a small amount of talcum powder to spray on the surface of the garment.

When the clothes are ironed and shiny, you can spray some water on the surface of the clothes, or use a wet towel to pad the clothes and iron them again.

You can spray some water and blanch it again.

1. Sprinkle some fine salt immediately after scalding, then gently rub it with your hands, and then put it in the sun to dry for a while, wash it with water, and the bright marks can be reduced or even completely disappeared.

2. You can use a toothbrush dipped in cold water to gently scrub, and then take it to the sun to dry, which can reduce the bright color. Serious wool or cloth clothes, after washing with a toothbrush, and then using the hot gas when boiler water is boiled, the color weight becomes lighter, and the color is lighter.

3. Wet the bright part with cool water and expose it to the sun. When the water is dry, dust off some more water until it becomes similar to the color of the other parts.

If the clothes are slightly scalded (shiny), you can spray some water on the burned place, adjust the steam ironing to medium temperature, put a layer of cotton cloth on top, and light ironing can return to normal.

If the condition is more severe, use a small amount of talcum puff on the surface of the garment, and after 5 minutes, adjust the iron to steam temperature and iron it with a cloth through the garment, and the garment will return to its original appearance. (When using steam, the iron should not directly touch the clothes, and should be a little away from the clothes, and spray the steam to the place where the mirror is raised, and directly return to normal).

Rub with a similar fabric dipped in diluted vinegar and then use an iron to spray down. In the future, you should first look at the washing mark on the clothes, some clothes can not be ironed directly on the surface of the clothes, you have to spread something in the bread cubes, and you have to control the temperature.

Generally, like wool, or some other high-end fabrics, if the temperature is too high when ironing, it will shine, this is because the fabric encounters high temperature and destroys the clothing fiber, like your brand clothes, it will really be very distressing, you can only pay attention to it next time, choose a better ironing machine, and it is best to have a low-temperature ironing function, or it can be adjusted according to the temperature of different fabrics, so as to achieve accurate ironing.

The shiny mostly appears on some wool or blended fabrics, because the surface of the fabric fiber is not flat but has scales, and the fiber scales in the place are often smoothed out so they are more reflective than other places, so they cause dark pants, and some places are shiny.

Wash it with white vinegar and you're good to go. Also, don't iron your clothes directly with a very hot iron, but put a towel on it.

Then if you have money, you can just buy another one.

Answer: If the garment is ironed slightly mirrored (shiny), you can spray some water on the damaged area, adjust the steam to a medium temperature, put a layer of cotton cloth on it, and gently iron it back to normal. If the condition is more severe, use a small amount of talcum powder on the surface of your clothing. After five minutes, turn the iron to steam temperature and iron the clothes with a cloth.

Clothes can be restored to their original appearance.

Or use a soft cloth dipped in an appropriate amount of white vinegar to continuously wipe the hot part of the garment. When the heat light is not too severe, the light disappears. When the condition is more severe, the symptoms of ironing clothes can be greatly reduced.

When the cotton fabric is not heavily scorched, it can be sprinkled with fine salt and gently wiped. Silk fabrics can be made with a small amount of baking soda and mixed with water into a paste, smeared on the ironing marks.

A way to fix the shiny ironing of clothes.

1.Wash and dry the garments that need to be repaired and shiny.

2.Add acetic acid at an acid concentration to half a basin of water, i.e. add 2-3 ml (1 tablespoon = 15 20ml) to 1 liter of water. It can also be replaced with edible white vinegar with a concentration of 3%.

3.Soak the towel in vinegared water, then wring it into a semi-dry area, lay it flat on a shiny place, gently iron it with an electric iron, and then wash and dry it with water after repeating it several times.

The shiny ironing of clothes can be repaired by the following methods: 1. Re-ironing; 2. Wipe with vinegar; 3. Rub gently with salt; 4. Sprinkle some talcum powder.

1. Re-ironing: If the clothes are ironed and shiny, you can put on a wet hail towel and re-iron; You can also use the opening hall water to spray the shiny position wet, and then re-iron it through the cotton cloth, pay attention to the temperature should not be too high, and generally use medium temperature.

2. Wipe with vinegar: Gently wipe the shiny position of the ironing with white vinegar to restore the original state.

3. Rub lightly with salt: You can sprinkle some salt on the ironing and shiny position, and gently rub it to make the light disappear.

4. Sprinkle some talcum powder: take an appropriate amount of talcum powder and sprinkle it on the position where it is ironed and shiny, let it stand for a while, use the steam function of the iron, and iron it through the cotton cloth, that is, the sail next to the mausoleum can remove the light.