-
As a high-performance, high-value-added adhesive, epoxy resin adhesive is highly valued by the industry, but at the same time, counterfeit and shoddy products are often patronized. Therefore, we can identify it by the following chemical methods. Method 1:
The sample is dissolved in sulfuric acid, and then concentrated nitric acid is added, and a large amount of sodium hydroxide solution is poured into it. The second type: drop 5 drops of concentrated nitric acid on the resin adhesive film, move the reactant into the test tube after a few minutes, add 6ml of acetone and then add potassium hydroxide ethanol solution to make it alkaline, if it turns from red to purple, it indicates that it contains epoxy resin glue containing bisphenol A type, this method is also intuitive; Method 3:
Take the adhesive film or glue solution, p-phenylenediamine and 8ml of sample water, boil for 8min, if it is epoxy resin, the solution is peach....
-
The reinforcing agent can cure the agent, that is, it can be dried, and the resin is liquid without the curing agent, and it will not dry when applied to the ground. According to the manufacturer's production formula, the dosage of curing agent is also different.
Suzhou Meiguowang floor material ****.
Water-based epoxy curing agent, water-based epoxy floor paint.
The cost of waterborne epoxy flooring made of water-based epoxy curing agent is lower than that of ordinary ones, and the quality is still the same.
Water-based is also green and environmentally friendly, which is healthy for both people and the environment.
Water-based is also suitable for wet ground. It is also a trend of development.
-
Summary. Hello, I'm glad to answer for you, it won't cure without reinforcing agents. Epoxy resin flooring is epoxy resin and curing agent mixed in a certain proportion to make epoxy flooring.
Epoxy resin refers to a polymer with more than two epoxy groups, which is one of the thermosetting resins, which has certain chemical activity, and can form a network structure when mixed with compounds containing active hydrogen. In addition, epoxy resins are produced in very large quantities and have a complete range of products, which are often used in the industrial field.
Can epoxy resin be cured without reinforcing agent.
Hello, I'm glad to answer for you, it won't cure without reinforcing agents. Epoxy resin flooring is epoxy resin and curing agent mixed in a certain proportion to make epoxy flooring. Epoxy resin refers to a polymer with more than two epoxy groups, which is one of the thermosetting resins, which has certain chemical activity, and can form a network structure when mixed with compounds containing active hydrogen.
In addition, epoxy resins are produced in very large quantities and have a complete range of products, which are often used in the industrial field.
Can't it be cured at high temperatures?
Hello, I'm glad to answer for you, high temperature is OK.
Causes of peeling of epoxy floor paint:
1. Poor quality of epoxy resin material will lead to undurable ground, peeling, delamination, discoloration, cracking, etc.; >>>More
1.Never dust and sand: Wuhan Qifeng floor 1 construction wear-resistant floor, 30 years never dust sand; >>>More
1. Avoid damage from biological attributes.
1. Heat-proof. The heat resistance of solid wood furniture is generally poor, and it is too close to the heat source, which is easy to make the wood lose water, and local dry cracking and deformation occur. Therefore, solid wood furniture should be avoided from direct sunlight when used, and at the same time try to stay away from heat sources, at least about one meter. >>>More
Refurbished disk,Mine is,No matter what software you use, you can't test it.,The time displayed was only 10 minutes.,The number of times is 3.Take it to after-sales, it can't be repaired, it is said to be refurbished, and it is said that the hard disk has been used for more than 10,000 hours, and the number of times is unknown. The logger doesn't record anymore!
Household disinfection cabinets are divided into high and low temperatures. The low-temperature part is only disinfected with ozone ultraviolet light, which is normal temperature, and the high-temperature part can be as high as 120 degrees, so plastic tableware should be careful not to be put in the high-temperature area, which can easily cause the tableware to melt or produce harmful substances.