The average 6mm thick wall is leveled, and how many kilograms of plaster per square meter need to be

Putty powder is not gypsum powder He is used for leveling 1 bucket of wall solid It is recommended that you go to the Oriental Home to buy putty before using sand and cement to level the wall, so that it is not suitable for cracking and hollowing, and then after the plaster is leveled on the leveled wall, and then the wall decoration construction is carried out according to the requirements of the wall latex paint construction process. . . According to the original flatness of the wall, there are some differences in the amount of plaster, and there are also differences in the plaster itself, about the amount in the decoration, painting a square wall, about 1 kg of putty powder, 100 grams of gypsum powder, white latex a house a bucket (10 kg) can be. It contains 473kg of cement and 1586kg of gypsum

How many square meters of plaster per kilogram is scraped at the bottom of the nest, this problem depends on the quantitative situation of the construction base, the amount of defects is not the same as the relatively small defects, and the quality standards required by the construction also affect the amount of plaster at the bottom layer, the smoother base surface is leveled with a ruler rod of about one meter, the general dosage is about two kilograms, and it is difficult to quantify the extent of the defects, so that the vague amount can only be used as a reference.

1. If the wall is flat, a bag of gypsum powder can be brushed 6-8 squares, if the wall is not flat, it is difficult to say, brush it once.

2. In the case of flat walls, a bag of putty powder can be brushed 10-14 squares, and it can be brushed 2 times (if possible, it can be brushed 3 times, so that it can be polished).

Summary. One centimeter thick one ton of gypsum can make 160 flat.

One centimeter thick one ton of gypsum can make 160 flat.

1. Under normal circumstances, if the flatness of the wall is not too poor with orange, the amount of leveling gypsum of 1 square meter should be about kilograms (powder), and the construction thickness of leveling gypsum is about centimeters, which is basically enough; 2. If the flatness of the wall is very poor, such as obvious slopes and depressions, the amount of leveling gypsum will be relatively large, and about 3-5 kg of leveling gypsum powder may be used per square meter. The packaging of a bag of leveling gypsum in the market before the dumb bucket group is about 20kg, and the construction of a bag of scraping is about 13 square meters. The amount of leveling gypsum in the whole house = the theoretical reference amount of leveling gypsum The area of batch scraping putty.

The density of gypsum is grams of cubic centimeters.

1 square meter = 10,000 square centimeters.

The volume sought = 10,000 cubic centimeters.

Weight 23 kg, 46 kg.

2 cm.

The thickness of the leveling depends on the flatness of the wall base, if it is too thick, you can use the way to prevent it from cracking, the specific strength, the decoration surface does not involve strength, that is, the strength of the material itself.

The thickness of the roof waterproof protective layer is not less than millimeters, and the amount of waterproof material of the roof is generally not less than 2 kg per square meter, and the amount of waterproof material is not less than 2 kg of waterproof coating per square meter, only in this way can the waterproof effect be guaranteed.

If the waterproofing layer is lower than this thickness, or if the amount of waterproofing paint is small, the effect is poor.

Only when the waterproof layer reaches the specified thickness can its true effect be guaranteed.

On the slope of the arched roof with a slope of more than 25% and the slope under the skylight, the short side lap should be avoided as much as possible.

Summary. Hello, I'm glad to answer for you, I know the customer service staff, good at life and traffic information query service.

It is necessary to determine according to the area of the wall, calculate the area and thickness to know how much is used, and how much plaster is needed for 2 cm thick wall leveling.

Hello, I'm glad to answer for you, I am Zhiyin Hongdao customer service staff, good at life knowledge and traffic information query service. How much plaster is needed for the 2 cm thick wall leveling to be determined according to the area of the wall, and the area and thickness are used to calculate how much is used.

Hello, I'm glad to answer for you, I know the customer service staff, good at life and traffic information query service. How much gypsum is needed for 2 cm thick wall leveling should be calculated according to the area of the wall, multiply the area by 2 to get the body and the missing product, according to the weight of the bag gypsum powder 10 kg can be brushed 7 flat calculation to determine how many bags are needed in total.

When you buy gypsum powder, tell them that if you can't use it, you have to return it, and you can budget more to prevent it from being enough.

1. What is the thickness of wall plaster leveling?

1. Generally 3-5 mm, not too thick! If it is too thick, it will crack, the goal is horizontal, but it is impossible to achieve a mirror finish, if you are decorating your own home, you can mix it with ordinary powdered putty, if it is a bathroom, etc., if it is very demanding, putty and glue.

Second, the process of wall leveling

1. First of all, remove the dust from the base layer, brush your teeth with a wire brush and tweezers, take out the mortar layer and ash, remove the base oil with 10% caustic soda lye and rinse with water. Net.

2. Measure the height of the surface according to the 1-meter high Jacket level line on the wall and measure it on the wall.

3. Sprinkle evenly on the bottom of the floor with a shower.

4. According to the level of the horizontal line of the surface layer of the wall in the room, determine the thickness of the surface layer of the gypsum (not less than 20mm), and then pull out the horizontal line and start pasting the cake 5 cm * 5 cm (the ash cake is used to control the floor pouring mason) with the elevation angle and the horizontal and vertical concrete blocks of the wall of the building are both meters and a piece of ash cake.

The upper plane of the gray cake is the height of the topsoil. If the room is large, it is necessary to clean the ribs (the ribs relate to the construction of plaster and other items, thus ensuring straightness, separated by a certain distance, so that a line of lift, called the ribs or ribs) First, use a vertical strip mortar with a width of about 3 cm. Height from floor to ceiling.

The thickness of the mortar is centimeters. Due to its strip shape, the verticality of the strip can be well controlled. Each interval is 1 meter.

5. Stir the mortar and shake it well with a stirrer. The colors are the same.

6. Before laying cement mortar, a layer of cement slurry should be applied (the purpose is to strengthen the bond with the bottom layer, and the cement suspension can solve the problem of poor adhesion between cement mortar and cement mortar. bottom plate), but not the area of the siding is too large, and the mortar is applied with a brush.

7. Apply cement mortar immediately after cement mortar, and evenly spread the mortar between the ash cakes.

8. Once the wood is scraped flat, use a wooden pallet to level it immediately, and check the flatness with a 2-meter ruler at any time.

The above is about:What is the thickness of the wall plaster leveling, all the knowledge of the steps to level the wall, the leveling of the wall is very important, so everyone should be careful when decorating.

You can get it for free

There are many details that need to be paid attention to in gypsum leveling, try to deal with them well, especially the thickness of gypsum leveling, so as not to affect the subsequent construction and bring unnecessary trouble. The thickness of plaster leveling can reach a few centimeters.

1. The maximum thickness of gypsum leveling can reach 2 cm. Generally speaking, the thickest thickness of leveling plaster can not exceed two centimeters, if it is too thick, it will definitely affect the construction effect.

2. The thickness of the gypsum ceiling in the house should be above. Before making the ceiling ceiling, it is necessary to measure the total height, as far as possible to design within a reasonable height, the ceiling ceiling produced in this way is better, it will not look too short, in addition, it can also play a better waterproof effect, and the construction effect is really good.

What should be paid attention to in gypsum leveling construction.

1. Base cleaning: The base should be cleaned thoroughly and responsibly, without floating dust, sundries, etc., and the surface of the base should be kept clean and hygienic at all times, so as not to affect the plaster leveling construction, and the overall effect will be worse.

2. Interface agent brushing: use the interface agent, apply it evenly over a large area with a roller, brush the root of the inner corner with a brush, and keep it clean after brushing.

3. Anti-cracking treatment: first deal with the cracked part, use a wallpaper knife to open the extension seam to the end, fill it with gypsum brush glue, and paste it with kraft paper after drying. After the primer is dried thoroughly, clean the wall properly, spread the white latex evenly over a large area with a roller, and spread the FRP lattice on the wall.

It should not be less than 50 mm. If it is an exterior wall and an internal insulation wall, it should be pasted with a good cloth.

4. Seam treatment: At the junction of different materials, it is necessary to paste professional seam tape, paste along the seam, and paste it firmly and smoothly.

I concluded: the thickest gypsum leveling can reach a few centimeters, so I will introduce it here, do you understand? There are many details that need to be paid attention to in gypsum leveling, and special attention should be paid to avoid unnecessary trouble, which will affect the subsequent construction and also cause the decline of the indoor aesthetic effect.