What should I do if something hits a hole at the bottom of the freezer and cracks?

If the crack is not too large, wipe the crack surface clean with a low-temperature resistant metal adhesive, and then choose a piece of iron sheet (the thickness should be appropriate) for bonding, otherwise it will be repaired by local welding, otherwise its performance and function will be affected.

Under normal circumstances, if only the insulation layer is smashed open and the refrigerant pipe is not damaged, just find a low-temperature, waterproof glue to fill the joint!

The bottom of the freezer was smashed by something and cracked, so this kind of thing should not be easy to repair, it is best to run a new one, like this, even if it is repaired, it may leak in the future.

The bottom of the freezer was smashed into the air, at this time, we must repair the cracks in time to prevent the further increase of the problem or the deterioration of the freezing effect, you can call customer service, and the customer service will have a professional tool to solve the problem.

Turn off the power and shut down the refrigerator, clean up all the moisture and frost in the refrigerator, open the door and ventilate and dry for a few hours, clean up the dirt on the surface of the damaged part, fill the damaged concave part with glass glue or other types of glue, and then scrape it flat with a blade, and then cover it with scotch tape on the outside.

What should I do if the bottom of the refrigerator is smashed by something and cracks? I think that if the bottom of the refrigerator is smashed by something, and the pit is cracked, this can be used with 302, and this glue can directly fill him.

Jin Gui's bottom was sprinkled with something a pit.,This crack.,What's the way to this?,This has to see if there's a problem with the part of the girl's chicken.,If there's no problem.,You can also use it like this.。

This is looking for a repair appliance to repair it for you, or replace the bottom shell so that you can solve the problem, because this bottom shell is all plastic products, you can replace it.

Please rinse the cracked inner wall of the freezer, dry it with a soft cloth, and place it in a sunny place to dry it [or use a hair dryer to dry it.]

Wash the refrigerator. 1.First of all, unplug the plug, take out the food when cleaning, turn off the temperature switch, and then take out the shelves, food boxes, etc., but do not take out the ice tray. Put the metal utensils with boiling water into the freezer compartment, and when the ice on the lattice wall melts, gently knock off the ice with a plastic sheet, if the boiling water is frozen, replace some more, so that there is enough energy.

2.Clean the inner and outer surfaces and accessories of the refrigerator with a sponge dipped in a good detergent, firm stains can be scrubbed with different brushes, brush the plastic or painted surface with nylon velvet, brush the metal or enamel surface with steel wire, brush the gaps of dust and fluff with a long-handled soft bristle, and clean the refrigerator with two tablespoons of soda water.

3.Let the ice on the exposed cooling coil melt naturally, and at the same time as the ice melts, clean the inside of the refrigerator, the inner surface of the door and the sealing gasket on the door with the washing liquid prepared with hot water, and then rinse it with clean water, until all the ice in the freezer compartment has melted, you can wash its inner wall, rinse it with clean water, dry it again, and then carefully take out the ice tray, remove the stagnant water inside, wash and wipe dry.

I didn't poke the tube, so I had nothing to do and cleaned the inside.

Pay attention next time, buy another one, you can't get it.

Using aluminum foil tape to stick it to the inside of the freezer can be a good repair for the holes in the inner layer of the freezer.

Because of the long-term use of the freezer, the items in the freezer have a compressive effect on it, and many freezers will have holes, which will often affect the refrigeration effect and the service life of the freezer. Aluminum foil tape is used in the electronics industry such as refrigerators and air conditioners to prevent gas emissions and at the same time has a thermal insulation effect.

Tear off the purchased aluminum foil tape and stick it flat to the tear, preferably for 1-2 minutes after pasting to prevent it from coming loose.

1. The inner wall of the refrigerator is only used for heat preservation, as long as the pipe behind it is not damaged. If the opening is small, just glue it with something. Specifically, it can be solved in the following ways:

1) Mix acetone and alcohol (ethanol) in proportion and rub it on the crack.

2) Go to the hardware store and buy a bottle of glue for the water pipe, and cut it flat with a little pvc pipe, and paste it on. Or go to the electronic accessories store to buy a bottle of "silicone" and use silicone directly to make up for it, but the silicone material is a little softer.

3) Go to the hardware store to buy a set of "water glue" and directly use "water glue" to make up. The glue in the water is made by mixing the glue and silica gel 1:2 according to the water pipe. Remember not to use aluminum foil to make up, as the condensate after cooling will soak the aluminum foil open.

4) If you are not sure to deal with it during the warranty period, it is recommended to find a maintenance person to repair it. If there is gas coming out, or if you can hear the sound of air leaking, it is even more necessary to find a professional maintenance personnel.

2. The correct defrosting method in the refrigerator.

Some refrigerators need to be defrosted, and manual refrigerator defrosting is time-consuming, labor-intensive, and ineffective. In order to prevent damage to the inner wall caused by brute force defrosting, defrosting can be done as follows:

1) First of all, according to the size of the refrigerator refrigerator, cut a slightly thicker plastic film, paste it on the frosty wall of the refrigerator, no need to use any glue, one paste is ready.

2) When defrosting, take out the food in the refrigerator temporarily, then remove the plastic film and shake it, the frost can all fall off, and then re-paste a film, put in the food, and continue to use.

Cracks can be glued with material.

1. If the cracking of the inner tank will affect the use effect, the cracked area is small, and you can stick it with waterproof materials. It is recommended to replace the refrigerator with a large cracking area, if it is a new one, it is a quality problem, and you can ask for a replacement.

2. It is very difficult to change the inner tank of the refrigerator, and it is more difficult to recreate a new refrigerator, and the harm of the cracking of the refrigerator liner is that the water vapor in the refrigerator will gradually penetrate into the thermal insulation foam of the refrigerator, and finally the thermal insulation effect of the refrigerator will be seriously reduced, which not only consumes electricity, but also affects the life of the compressor.

Fix any damage to the bottom of the freezer.

The freezer is an indispensable device in the home, but the bottom is often accidentally kicked by people and causes damage, which brings inconvenience to use. In order to repair these breakages, we need to adopt some simple methods and techniques.

Step 1: Clean the bottom of the freezer.

First of all, we need to clean the debris at the bottom of the freezer to ensure that the freezer can move on a smooth ground.

Step 2: Observe the damage.

Observe the broken area, and if it is only a minor abrasion or scratch, you can use fine sandpaper to repair it. However, if the damage is more severe, another method will be needed to repair it.

Step 3: Measure the broken area and prepare the material.

Measure the area of the broken area, then go and buy some good sized hardwood boards to destroy them.

Step 4: Install the plank.

Trim the board to the size of the broken part and use fixative to attach it to the broken part of the freezer.

Step 5: Paint protection.

After waiting for the fixative to dry and ready, apply the board repeatedly with a high-temperature paint, which not only protects the board, but also prevents moisture and decay.

Step 6: Check the repair effect.

Wait for the paint to dry and check the repair effect of the damaged area. If needed, a second coat of paint can be applied to enhance the repair.

In conclusion, it is not difficult to repair the damage at the bottom of the home freezer. By choosing the right boards and applying high-temperature paint, we can easily accomplish this task. This method is not only simple to operate, but also has a good repair effect and a long service life, making it suitable for all types of freezers.

It can be attached with tin foil with glue to prevent moisture from entering the interlayer.

If it only punctures the inner tank, it will not affect the normal refrigeration of the refrigerator; If the refrigeration pipe is damaged, the refrigerant leaks and cannot be refrigerated. It is recommended that when defrosting, do not clean with sharp objects to avoid damaging the internal parts of the refrigerator.

You can use a hard plastic sheet and stick it with instant adhesive to make up for it.

Determine the cracking position and size of the refrigerator liner, and be sure to repair it in time to avoid affecting the refrigeration effect of the refrigerator. 1. For the parts with relatively small cracks, you can use a squeegee to appropriately increase the gap of the crack to effectively ensure the rapid entry of the filler, which can achieve a good filling stability effect. 2. After the filling is completed, it should also be dried and polished accordingly.

1. When the refrigerator is designed for liner processing, the corresponding integrated processing mode will be carried out, and the comprehensive sealing conditions of the refrigerator liner are to ensure that there are very obvious cracks, which will not only affect the overall working environment of the refrigerator, but also reduce the freshness and freezing performance of the refrigerator.

2. Of course, for the part with a relatively large crack, it is necessary to increase the corresponding filling position, after the completion of the filling, a certain drying treatment should be carried out for the surface, and a certain amount of drying should be carried out for the working surface, under the normal drying working conditions, the user will also choose a special Lingxun polishing instrument for rapid polishing of the surface in order to improve the overall aesthetic effect of the refrigerator inside, so as to ensure the flatness of the surface and ensure the normal operation of the refrigerator in time.