What are the advantages and disadvantages of solid wood core board?

The most common boards in our furniture manufacturing are large core boards and solid wood boards, which are very popular with consumers, so what is special about these two boards? Today, Dawang coconut board will take you to understand how to distinguish between large core board and solid wood board? What are their advantages and disadvantages?

It allows you to easily grasp the knowledge of plates and better buy plates.

How to distinguish between a large core board and a solid wood board? What are their advantages and disadvantages?

We know that large core board can also be called blockboard, which is a type of plywood. The biggest difference between these two boards is that the solid wood board is spliced with a whole board, while the blockboard is filled with a piece of solid wood.

There are many advantages of large core board, it has the characteristics of high strength, good stability, sound absorption and heat insulation, and it is easy to clean in daily life, which is a very good furniture decoration material. However, because the large core board does not have a veneer, if we want to use it, the surface must be brushed with a layer of paint, which may produce a small amount of formaldehyde, which will affect human health. Solid wood boards are often used in home decoration, solid wood boards have the characteristics of warm in winter and cool in summer, which is very suitable for families with the elderly and children, solid wood boards have good stability, high strength, retain the texture and characteristics of logs, and are environmentally friendly and healthy materials.

However, the waterproof performance of solid wood boards is poor, so we need to maintain them regularly.

The above is a summary of how to distinguish between large core board and solid wood board and what advantages and disadvantages they have. In fact, no matter what kind of board we choose, we must comprehensively compare the characteristics of their use, the quality of the plate on the market is uneven, we must pay more attention.

Due to the anisotropy of hardwoods, wide panels are prone to deformation. In addition, the glue seams between the panels are exposed, and the messy lines between the panels can be directly seen. Moreover, the firmness of the splicing has a great impact on whether the panel cracks or not.

In addition, moisture in the paint can have an effect on the wood during the painting process. Even if the freshly processed product is very flat, the surface of the solid wood wide panel can be seen in daily use, and it is easy to have uneven edges and cracks in the glue joints. For a long time, these phenomena will be more pronounced due to the influence of air humidity.

Moreover, the wider and thicker the panel substrate, the more obvious the problem becomes.

If the quality of the cross-seam is poor, a visible cross-seam can be seen. If the strength of the transverse splicing is not enough, the glue joint is prone to cracking. Therefore, for furniture produced by general solid wood wide panels, if you look at the lacquer surface of the furniture in the backlight direction, you can see the height of the slats and the glue seams between the slats.

If the materials are carefully selected and the process is scientific, this phenomenon will be smaller, but it cannot be avoided fundamentally.

In addition, due to the different texture and hardness of each piece of wood, it is not possible to make each piece of wood the same thickness even with a fixed thickness sander, resulting in an uneven surface of each piece of wood. After coating, the unevenness of the slats becomes more obvious.

The furniture board material selection, color, texture and service life made by this process have high requirements, low wood utilization rate, large waste and high cost. In particular, the length of the wood is determined, and the softness and hardness of the wood are determined, which directly affects the size of the deformation probability in the process of use, and its characteristic is that the paint is almost impossible to distinguish from good lacquer household products, and can only be found in the use time. Even though the materials are very strict, the large furniture, such as countertops, door panels, etc., lacks a sense of wholeness, and the wood grain is slightly cluttered, creating a calm and soft overall atmosphere.

After all, the solid wood core board is pure solid wood, in my opinion, it is okay to choose a pure solid wood core. It has the characteristics of green environmental protection. It is carefully selected 20-year-old eucalyptus, which is naturally insect resistant and moisture-proof.

Solid wood core board is actually a board with solid wood as the core, and the outside is still some multi-layer particle board.

Such a plate is insufficient in terms of durability, and at the same time, the hardness of the plate is not enough, and it is easy to break.

Dear, hello, I am glad to answer for you, the advantages and disadvantages of the solid wood board have many advantages, it has the characteristics of high strength, good stability, and also has the effect of sound absorption and heat insulation, and it is easy to clean in daily life, and it is a very good furniture decoration material. The whole core solid wood board is often used in home decoration, the solid wood board has the characteristics of warm in winter and cool in summer, which is very suitable for families with the elderly and children, the solid wood board has good stability and high strength, retains the texture and characteristics of the log, and is an environmentally friendly and healthy material. Cons:

Since there is no veneer on the whole core solid wood board, if we want to use it, the surface must be brushed with a layer of paint, which may produce a small amount of formaldehyde, which will have an impact on human health. The waterproof performance of the whole core solid wood board is poor, so we need to maintain it regularly.

What are the advantages and disadvantages of the new version? I think the solid wood coreboard is very strong and loves to use. But. His shortcomings are special if Chen wants to move yes. Very strenuous.

The disadvantage is that the surface of the solid wood wide panel can also be seen in daily use, and it is easy to have uneven edges and cracks in the glue joints. It is recommended to choose a pure solid wood core. It has good manufacturability, and it is also cost-effective.

There are no drawbacks, huh? After all, solid wood core board, it is pure solid wood,

Solid wood core board, because it is pure solid wood, so it is relatively high in terms of **. I have learned about the pure solid wood core, its quality is guaranteed, and the cost performance is also high, and it has good manufacturability. I recognize this brand even more.