What are the differences between solid wood splicing boards and solid wood panels?

Because of solid wood particle boards.

The board surface is a whole panel, and the particles inside are gathered together, so that insects are not easy to get into, and water stains are not easy to get in. The surface of the solid wood splicing board is spliced together by small wooden boards, and there are inevitably gaps in the board surface, which is easy for insects to get into and water stains to seep in. Although the precious wood is stable, it is also expensive.

In general, solid wood boards** are more expensive than particle boards in all aspects. The selection of particle board should choose a high-grade brand, with high environmental protection standards. If you choose solid wood boards, choose the last time in the common material in the market, ash.

Red oak, cherry.

Wait a minute. <>

Solid wood splicing is solid wood panels.

Add a layer of cost up and down, made of high-temperature pressing, multi-layer solid wood is a multi-layer board pressed by high temperature, are very good boards must be solid wood splicing board is better, more durable, and relatively high. Solid wood sleeper core board compared with solid wood splicing board. It is better to have less glue content of solid wood whole core board.

The truth that you get what you pay for is eternal. It is not concealed that the wardrobes that are much cheaper than the normal ones, and most of the board raw materials they use are in: wood on the construction site, demolition waste, waste doors and windows, waste floors and other unimaginable things.

Of course, it is solid wood, which is more durable and durable, and the texture on the grain is very natural. The splicing board is a board made of splicing multiple wooden boards, because the vertical planks of this board are made of a zigzag interface, which is very similar to the cross-docking of the fingers of both hands, so there is a splicing board. The two sides of the board surface are made of fine wood fibers, wood particles are sandwiched in the middle, and the wood-based board is made of melamine after applying adhesive under the action of heat and pressure, and the panel finish is melamine.

Veneer, the cross-section of which is a honeycomb of wood pellets in the form of machine-made finished panels.

The difference between the use of particle board is that it is often used in the production of desks and cabinets in the workplace, or custom wardrobes and cabinets at home, which are more close to the people. Solid wood boards are often used to have high requirements for furniture quality, and fluctuate greatly depending on the type of wood.

The material of solid wood splicing board and solid wood board is the same, both are solid wood.

However, the splicing board is synthesized to a certain extent, there is an interface, the structure is not very stable, and it is easy to crack, while the solid wood board is integral, not easy to disconnect, and relatively firm.

The difference is that solid wood panels are thicker and heavier, and generally speaking, they are more expensive, while solid wood panels are relatively lightweight, cheaper, and stronger.

There is a big difference, first of all, the material is different, and the color is also very different, the style is different, and the size of the two is also very different, the most important thing is that there is a big difference.

1. The structure is different

The combination of panel furniture is usually connected by various metal hardware, which is convenient for transportation, because the substrate breaks the original physical structure of wood, so when the temperature and humidity change greatly, the deformation of wood-based panels is much better than that of solid wood, and the quality is more stable than that of solid wood furniture.

Solid wood furniture is furniture made of solid wood sawn timber or solid wood planks as the base material, and the surface is finished; or furniture that has been veneered with solid veneer or veneer on such substrates and then finished. Solid wood plank refers to the solid wood material formed by secondary processing of wood such as laminated timber or woodworking board.

2. The characteristics are different

Solid wood furniture is very particular about workmanship, and the quality of materials is excellent, so the service life of solid wood furniture is very long; Solid wood furniture has its own unique style personality Solid wood furniture raw materials come from nature, integrating the essence of nature, and truly showing the unique taste of real wood furniture: high-end, heavy and long-standing.

The appearance of board wood furniture is very beautiful, the outer frame of board wood furniture is made of solid wood, and the finish is made of various density boards, which has a great advantage in modeling, which is better than solid wood furniture.

The difference between board wood furniture and solid wood furniture.

From the point of view of materials, board wood furniture refers to furniture that is mixed with solid wood and solid wood particle board. Solid wood particle board is a wood board made of wood chips, although the appearance is very similar to solid wood, but there is still a certain gap in quality.

Solid wood furniture. The main body of the furniture is made entirely of wood, with only a small amount of plywood and other accessories. Solid wood furniture is generally a mortise and tenon structure, that is, a fixed structure. An important category of solid wood furniture is hardwood furniture, also known as Chinese furniture.

Hardwood furniture is a kind of furniture with strong artistry, it is in accordance with the traditional style and structure of furniture in the Ming and Qing dynasties in China, and is made of precious wood such as pear and red sandalwood, which has a high collection value.

board wood furniture. The structure is made of solid wood frame, the surface part is made of various MDF, the contact surface is made of various exquisite solid wood veneer, the board wood furniture is made of solid wood as the frame, the middle part is made of man-made board, and the surface is mostly made of solid wood veneer and various paints. In terms of materials, board wood furniture is far inferior to solid wood furniture, not all of them are made of the same materials, so it is cheaper than solid wood furniture.

Advantages of solid wood furniture.

1. Solid wood furniture is very particular about workmanship, and the quality of materials is excellent, so the service life of solid wood furniture is very long;

2. Solid wood furniture has its own unique style and personality Solid wood furniture raw materials come from nature, integrating the essence of nature, and truly showing the unique taste of real wood furniture: high-end, heavy and long-standing.

Advantages of board wood furniture.

1. The appearance of board wood furniture is very beautiful, the outer frame of board wood furniture is made of solid wood, and the finish is made of various MDF, which has a great advantage in modeling, which is better than solid wood furniture;

2. Wood furniture is also very strong, compared with furniture spliced with various MDF, but it is far from solid wood furniture.

In the process of purchasing furniture, many people have a lot of questions about the material, and some people often ask what is the difference between solid wood and board in recent times, so we will sort out relevant information and give you a brief introduction today.

Solid wood, in fact, is natural wood, furniture made of solid wood, generally has the texture of natural wood on the surface, and the furniture produced is exquisite in terms of technology, structure, texture, etc.; Plate is a kind of wood-based panel, the type is also divided into several, the type is in the next paragraph in detail, the board will also be used to make furniture, the use of board to make wardrobe is the most common type of furniture, the furniture made of board, in the appearance of the rhythm of modern fashion, but in terms of texture, it is far worse than solid wood. This is one of the differences between solid wood and board.

Solid wood is natural wood, and there are many kinds of natural wood: birch, oak, pine (white pine, red pine), basswood, camphor wood, red sandalwood, ebony, small leaves, maple, core wood, etc.; Plate is a kind of man-made board, which is divided into: particleboard, medium density board, high-density board, thick plate, extra-thick plate, thin plate, medium plate, etc., and the sawn wood with a width of more than 2 times the thickness size is called a board.

For the above classification, the difference between solid wood and board can be basically understood.

The panels are generally made into standard-size flat rectangular building material boards, which are generally used as wall walls, ceilings or floor structures. The width and thickness ratio of the plate is large, and the surface area per unit volume is also very large, and the large surface area has strong coverage ability, which has been widely used in chemical industry, construction, metal products, metal structures, etc.; The plate can be bent and welded into various complex cross-sectional sections, such as section steel, steel pipe, large I-beam, channel steel and other structural parts. Solid wood does not have this characteristic, in terms of characteristics, the above is the difference between solid wood and board.

The shape of the plate is simple, can be produced in rolls, and the largest amount is used in the national economy, so it is necessary and able to achieve high-speed continuous rolling production; The board is also medium density board, particleboard, blockboard, etc. as the base material, the board is formed, the performance is stable and not easy to deform, and the processing and transportation are more convenient. The load-bearing horizontal strips close to the ground between the solid wood columns should not have large knots or cracks. The structure is firm, the frame shall not be loosened, and the tenon and tenon shall not be broken.

The above is the difference between solid wood and board.

The difference between solid wood and board is different in the production process: the production process of solid wood furniture is more complex, the production process of panel furniture is relatively simple, and the places with modeling are generally solid wood or gypsum materials. From the perspective of environmental protection, solid wood furniture is made of natural wood; The board is a type of wood-based panel, and it is inevitable that the formaldehyde emission of the board used exceeds the standard.

The above is the difference between solid wood and board, I hope it can help you.

Today, I will share with you the difference between solid wood and board, if you need it, you can simply understand the relevant information through this article, so that you can better choose the products you like.

Panel furniture is furniture made of wood-based panels (MDF, particleboard, plywood, etc.); Board-wood combined solid wood furniture is a furniture made of solid wood as the main structural raw material (legs, feet, frames, etc.) and wood-based panels as the surface material (laminate, countertop, door core board, etc.).

Panel furniture is simple in shape, easy to produce, and low in cost; The combination of board wood and solid wood furniture is rich in shape, combining the respective characteristics of board and solid wood.

Plywood is a three-layer or multi-layer plate-like material made of wood segments that are rotary cut into veneer or cut into thin wood by wood planer, and then glued together with adhesive, usually with an odd number of layers of veneer, and the fiber direction of adjacent layers of veneer is glued perpendicular to each other. Compared with plywood in the ordinary market, multi-layer plywood has small deformation, high strength, internal *** (small holes after sawing, no delamination), good flatness, can produce 5-40mm different thicknesses, multi-layer solid wood board with criss-cross arrangement of multi-layer plywood as the base material, the surface is made of high-quality solid wood veneer or technology wood as fabric, and is made by several processes such as cold pressing, hot pressing, sanding, and health preservation.

Solid wood planksSolid wood planks are wooden planks made from intact timber (logs). Solid wood boards are generally classified according to the name of the board substance (log material), and there is no unified standard specification. Solid wood boards are relative to a large number of non-solid wood boards, such as plywood produced by using wood processing scraps, crop straw, chaff, peanut shell and other materials, pressing templates, etc.

Solid wood planks are durable, natural textures, most of them have the unique aroma of natural wood, have good moisture absorption and air permeability, are beneficial to human health, do not cause environmental pollution, and are high-quality boards for making high-end furniture and decorating houses. Solid wood panels made of special materials (e.g. beech) are also ideal for the manufacture of gun butts and precision instruments.

Not the same.

Solid wood board is a whole board, and solid wood multi-layer board is made by pressing several thin boards together. Solid wood panels are taller than solid wood multilayer boards**, but solid wood panels are more environmentally friendly than solid wood multilayer panels.

Multi-layer solid wood board also belongs to the category of solid wood, but it is often said that solid wood is log, multi-layer solid wood board is a layer of very thin solid wood vertical and horizontal layer of superimposed processing, foreign use for many years, very popular, commonly used in furniture, decoration, etc., multi-layer solid wood board is better than log cracking deformation, is a good board, good multi-layer solid wood board is not cheaper than logs. As for the multi-layer board you said, I haven't heard of it, I think the woodworking board can also be said to be a multi-layer board, the woodworking board is a layer of miscellaneous wood in the middle of the board pressed into a thicker board, and a very thin layer of wood-like board is pressed into three layers, which is commonly used in home improvement ceilings.

Think of a way for the landlord, build a thin wall on the exposed side of the cabinet and then make a cabinet, put the sliding door and see nothing, the new wall can fit the same wallpaper or latex paint as the room, it looks good and firm, and there is not much wasted space.

Yes, but the veneer should be pressed with hardware, and it is recommended to paste it directly with a veneer close to the sliding door, which is easier to operate.