What should I do if my vivo X7 can t be turned on after restarting?

vivo x7 handThe machine cannot be turned on after it is restartedYesHere's how to solve it

Make sure your phone's battery is sufficient。Connect the mobile phone to the original charger, if the mobile phone screen displays the charging logo (as shown below), it means that the mobile phone is charging, and you can charge it for about 20 minutes before trying to turn it on; If the charging symbol is not displayed, you can change to other original vivo chargers and data cables to try charging.

2. Try force restarting your phone. Here's how to force restart your vivo phone:

funtouch osThe following models:: Press and hold the power button for 30 seconds.

funtouch osand subsequent models: Press and hold at the same time".Power button"And".Volume down key"30 seconds.

3. Enter the recovery mode first, and then select "Enter".System Repair Modea) Enter recovery mode.

funtouch osThe following models:: Press and hold while in the shutdown statePower button"And".Volume + keyWhen the vivo logo appears, let go, it will enter recovery mode.

funtouch osand subsequent models: Press and hold while in the shutdown statePower button"And".Volume + keyWhen the vivo logo appears, let go, it will enter fastboot mode, and then enter recovery mode through the menu selection.

b), select "Enter".System Repair Mode

<>4. If the system cannot be repaired in the system repair mode, you can try to repair the system through the memory card (TF card). Conditions to be met: This model supports the installation of memory cards, and there are card readers, memory cards, and computers nearby.

How it works: b) Use a card reader to install the memory card, connect it to the computer, and copy the firmware package to the root directory of the memory card (do not put it in any folder).

Chinese recovery firmware recovery tutorial

English recovery firmware recovery tutorial

5. Enter the recovery mode and try the double clear operation (double clear will clear the phone data, please operate with caution). The operation method of Shuangqing is as follows:

a) Enter recovery mode.

funtouch osThe following models:: Press and hold while in the shutdown statePower button"And".Volume + keyWhen the vivo logo appears, let go, it will enter recovery mode.

funtouch osand subsequent models: Press and hold while in the shutdown statePower button"And".Volume + keyAfter entering fastboot mode, select to enter recovery mode through the menu.

b), select "Enter".Clear data, and then selectClear the cache"And".Erase all data

Note: In English recovery mode, clear cache to wipe cache partition; Clear all data as wipe data factory reset; Reboot the phone to reboot system now

c), after the completion of the double clearing, select ".Reboot

<>6. If it is not repaired through the above methods, please bring the purchase voucher, warranty card and mobile phone to the nearest vivo after-sales service center for processing.

Enquire about the after-sales service center**

Phone won't reboot properly:

It is recommended that you press and hold the power button (for full screens, you need to press and hold the "lock button" and "volume down button" at the same time) for 30 seconds to force restart your phone.

1. First confirm whether the battery of the mobile phone is sufficient, and then connect the mobile phone to the power supply to charge for a period of time before trying to turn on the operation.

2. Press and hold the power button (for the full screen, you need to press and hold the "lock screen button" and "volume down button" at the same time) for 30 seconds to try to restart the phone.

3. You can press and hold the "Power Button" and "Volume + Button" at the same time to try to enter the recovery mode, first select "Wipe Data Factory Reset", wait for the interface to jump, and then select "Reboot System Now";

How to handle the auto-restart:

1. Check whether the power button and volume button are touched by mistake.

If the power button and volume button are stuck in the case, or if they are squeezed in the pocket for more than 12 seconds, it may cause the phone to restart, please be careful to avoid squeezing the buttons.

2. Check your phone settings.

Go to Settings - Quick & Auxiliary - Timing Tasks - Timing Power On and Off to see if the timer power on and off task is set.

3. Check whether the mobile phone is in an environment where the temperature is too high or too low.

If the temperature is too low or too high, the low temperature or high temperature protection function of the mobile phone will be triggered, resulting in automatic restart. Please try to keep your phone at an ambient temperature of 0 35.

4. Uninstall incompatible software.

If you installed the software through a non-app store, it may be incompatible and cause the phone to restart, it is recommended to back up the app data, uninstall the software, and try.

5. Check whether the storage space is sufficient.

It is recommended to use iManager to clean up the storage space of the mobile phone in time, and uninstall the software that is not commonly used to keep the remaining storage space at more than 20%.

6. Upgrade the system version.

Check whether the system version of the mobile phone is the latest version, the system update will improve the compatibility of the system with third-party applications and the stability of the system, and some new versions will also add some new features.

7. Reset all settings.

Note: Restoring all settings will not delete any files or software, only all settings of the phone will be restored, please make sure that it does not affect the use of the software before you operate. For the security of your data, it is recommended that you back up your phone data in advance before the operation.

8. Service center testing.

If the above methods do not solve the problem, please bring your mobile phone and purchase voucher to the vivo customer service center for testing. Customer service center address: Enter the vivo official website vivo**app--my-service outlets or vivo official website web version--bottom of the bottom--service support--service network inquiry--select the province and city to query the customer service center address.

It is recommended to contact ** in advance before going to avoid empty running, plan the itinerary reasonably, and travel safely.

Tool Material change: vivox7 phone.

1.Press and hold the power button for 15 seconds to force the shutdown and re-core the bridge to start.

2.After restarting your phone, find the Settings option on your phone's desktop and turn it on.

You can press and hold the "power button to talk about filial piety" for more than 12 seconds to force restart the hand and the machine, can not be restarted or used normally, you can bring your mobile phone to the service center for liquid draft detection and processing, click the web link.

The following black screen can be divided into two types and corresponding solutions:

1.There is a problem with this software itself, the software itself is unstable, or it does not match the mobile phone system, you can uninstall it;

2.There is a conflict between software and software, and it is necessary to install and uninstall a software software under the experiment, and if you find it, uninstall it, and the problem can be basically solved.

Second, the standby black screen, the reason is often that the screen triggers the circuit delay reflected. That is to say, the mobile phone system has issued a filial piety instruction to light up the screen, but because the circuit is delayed, it is not sent successfully, and the screen is not lit successfully, but the mobile phone system thinks it has been lit, so it causes a black screen, and it is recommended to take it to the repair shop to test and repair it.