Why can t I type in PS???

In the early days, there was such a situation, such as the damn one, it is estimated that the software's support for Chinese is not good, and of course there will be some strange errors when you import the font.

The solution is to reboot or install a new version of PS now with cs2, which rarely happens.

No way, you certainly didn't find a place to set the font color.

You see,First of all, you have to select T in the toolbox.,It's the font set in PS.,You know? And then there's left alignment, right alignment, see?

To the right of them is a small blank box that sets the font color. Can you see it? I'll keep an eye on it, and tell me if you've succeeded.

The cursor is there, you pay attention, in the middle of the first row of squares, there is a very small cursor, just too small, I didn't notice that you didn't type, maybe the font you chose at the beginning was a foreign language, not a font like italics or bold, so it couldn't be typed, you changed the font first, and then try it as you did!

Is your Photoshop CS3 version?

And your system is not XP

sp3?There is a conflict between the two.

Try this method.

Preferences - Text.

And then will"Displays Asian font options"with"Font preview size"Tick off these two items.

Start by checking if your text color is white. In fact, you don't need to widen, you press "t" and click directly on the canvas, and the vertical bar will appear flashing and flashing.

PS will not display text because the font size is too small, the font color is the same as the background color, software failure, etc.

Tools Raw Materials:

Lenovo Y7000P

windows10

1. Photoshop found that typing does not display text, it is likely that the font size is set too large, at this time, you can point the mouse to the small box below the text box, when the shape of the mouse pointer changes, hold down the left mouse button, drag the mouse down, and elongate the text box.

2. When adjusted to the size of the text box to accommodate large text, the typed text will be displayed.

3. If the text is too large, you can adjust the font size of the text. The method is to double-click the mouse in the text box and then press the Ctrl+A key combination of the keyboard to select all the text in the text box.

4. Then click the font size adjustment drop-down box as shown in the figure below. Select a smaller font size in the drop-down menu, or enter a number in the font size adjustment box.

5. When the font size is adjusted to the appropriate size, the text will be displayed in the text box.

Hello, I'm glad to answer the question for you, ps can't input text reasons and solutions: 1. **Resolution problem, solution: Click the image in the menu bar - adjust - image size, cancel the "resize image pixels" check, and then set the resolution to 72 (the default value of computer display), and finally click "OK".

2. Font problem, solution: change the font, set the font color and size, and re-enter it. 3. Font tool setting problem, solution:

Right-click on the tool icon in the options bar (the Hunger Tree key for the Text tool is shown as a "t") and select the Reset tool. 4. PS setting problem, solution: Click on the menu bar - Preferences - Text, Chunyuan will cancel the clever tick in front of the text preview size, and then click "OK" to restart PS.

I hope it can help you and I wish you a happy life! <>

The specific steps are as follows:

1. First open PS and click the "T" icon option on the left to bring up the text box.

2. Then enter the text in the page and press the keyboard "Ctrl+A" to select all the text.

3. After that, select the Chinese character on the page and click the "Color" option.

4. Then click on the "white" on the page and click on the "OK" option.

5. Finally, you can see that the text has been displayed on this page.

psThe inability to enter text is caused by a setting error, and the solution is:

1. First of all, you need to open the PS software, as shown in the figure below.

2. Next, you need to click on the text tool on the left.

3. Click "Horizontal Text Tool" in the drop-down box.

4. Click the left mouse button in the blank space and enter the text.

5. Drag the left mouse button to select all the text.

6. Click to select a color and click "OK", as shown in the figure below.

P.S. The inability to enter text may be caused by an operation error, and the solution is as follows:

1. First open PS, click the "T" icon option on the left side to pop up the text box.

2. Then enter the text on the page and press the keyboard "Ctrl A" to select all the text.

3. Then select the text on the page and click on the "Color" option.

4. Then click on the page to select "White" and then click on the "OK" option.

5. Finally, you can see that the text has been displayed on this page.

Summary. 1. Please confirm whether the font size is too small, if it is too small, the cursor will be very small and difficult to see;

2. If the font size is too large, try to expand the text box to see if it is visible;

3. Whether the text color is very close to the background color;

4. Whether the transparency of the text layer is 100%;

5. Whether the text layer is obscured by the upper layer (put the text layer on top);

6. Whether the layer is set to visible (whether the eyes are closed, if so, please click on).

7. Some cracked versions will have no response or delay in response to text tools, you can consider changing to a PS version.

8. Restart PS and restart the computer.

In the figure below, the above are all set up normally, the font size is 100, the color is black, the transparency is 100, the text layer is at the top, and the text box cannot be displayed when the text box is expanded, and there is still a problem with restarting].

What should I do if I suddenly can't type the word in the ps.

1. Please confirm whether the font size is too small, if it is too small, the cursor will be very small and difficult to see; 2. If the font size is too large, try to expand the text box to see if it is visible; 3. Whether the text color is very close to the background color; 4. Whether the transparency of the text layer is 100%; 5. Whether the text layer is obscured by the upper layer (put the text layer on top); 6. Whether the layer is set to visible (whether the eyes are closed, if so, please click on). 7. Some cracked versions will have no response or delay in response to text tools, you can consider changing to a PS version. 8. Restart PS and restart the computer.

In the figure below, the above are all set up normally, the font size is 100, the color is black, the transparency is 100, the text layer is at the top, and the text box cannot be displayed when the text box is expanded, and there is still a problem with restarting].

If none of the above can be solved, then the image resolution problem can be considered. Click "New", you can find that the position of the resolution is "1", which is abnormal, and it is this that causes the problem that the text cannot be displayed. Resolved:

Replace the resolution "1" with 72. At this time, the problem can be solved by using the text tool in the new canvas, and the black text of 100 can show o( o. If this does not solve the problem, it is recommended to clear the software and reinstall it, and if it does not, replace the version.

I hope mine can help you and good luck!

It doesn't show up when you type in Photoshop because the color of the word you typed is the same as the background color, so it can't be displayed. The workaround is as follows:

1. The one shown in the figure below**, you can see that there is a text layer on the right layer, but it can't be displayed, because the font color is the same as the background color, so it is hidden and can't be displayed.

2. Go to the toolbar on the left side of the PS box and find the foreground color, you can see that it is white, then click it.

3. It will automatically pop up a color picker in the foreground, move the small circle of color picking, move it to black or other non-white places, and click OK.

4. Then select the horizontal text tool on the left side of the PS box, and click with the mouse to select.

5. Then go back to the **layer, click on the background color, and you can see that the word cursor appears, and the typed words can be displayed at this time.