What should I do if my Huawei Honor 3C system is damaged?

Flashing preconditions.

2: The mobile phone has sufficient power, and it is recommended that more than 50% of the battery remains.

Ensure that the internal storage of the phone or the external SD card of the mobile phone has at least 100M or more remaining capacity than the ROM package.

Step Method. 1.Connect your phone to the flashing master.

3.Perform rooting

6.One-click flashing.

Prepare the ROM,Start flashing the phone with one click,Before flashing starting, the flashing master will check the phone and the flashing package,Click "Browse" to select the best ROM just now,Don't forget to follow the prompts to back up contacts、SMS and applications。

After entering the "one-key flash" mode, the device will enter the automatic flashing mode, and after about 5-15 minutes, you can complete the one-key flashing. Please be patient.

Wait for a few minutes and the flashing will be done automatically.

Try to restore the factory settings, if it doesn't work, go to the after-sales service, it is estimated that the hardware has failed.

The Honor 3C is an OGS fully bonded screen: its broken screen is divided into implosion and implosion.

Implosion: The screen protector and touch screen module are shattered.

Implosion: It refers to the abnormal display of the screen, such as stripe patterns, black screens, black blocks, and touch failure.

The implosion is shown below

In this case, only the outer screen glass and touch screen module need to be replaced.

In order to replace only the outer screen glass and the touch screen module without replacing the LCD display, it is necessary to separate the bad screen surface layer (that is, the separation between the outer screen glass and the touch screen mold and the LCD display) through screen separation technology and separation equipment, and then remove the OCA glue between them through polishing and grinding. The new exterior glass and touchscreen mold are then glued to the LCD display by re-gluing and pressing. In this way, the entire screen pressing process is completed, and the general master has more than 5 years of manual work and good machinery and equipment to perfect repair.

Otherwise, even if the screen is re-pressed, it is easy to have the risk of poor screen press-fit or inaccurate alignment, which will lead to warping or poor touch.

If it is implosion, it can only be replaced with the internal and external screens, that is, the screen protective glass, touch screen module, LCD display screen, and the screen can be replaced in one piece. This all-in-one screen replacement** will be slightly higher.

Hello, first of all, five minutes of silence for the 3C of LZ

Honor 3C is an OGS fully bonded screen: full lamination means that the screen protective glass is glued together with the touch screen module and the LCD display screen, so once the screen is broken, all the above modules need to be replaced, and the cost is higher.

I'm afraid that this can't be installed and used by other screens, because the circuit design of the display module part is different, and it may not be universal.

It is recommended to buy another one, whether it is to continue to buy Huawei, or to change to other mobile phones. (After all, the mobile phone is not expensive, and now there are more choices, if you have plenty of funds, you can also choose a better one, if you just use it casually, to the downstairs, buy a lumia520, seven hundred oceans are also very good, there is a colleague in use).

However, large-screen mobile phones, the screen is afraid of falling, so it is recommended that you take care of it when you use it.

Thanks for adopting! OGS Optical Bonding Screen Advantages:

Because it is full lamination, the thickness of the screen is reduced, the light transmittance is significantly improved, and there will be the effect of the screen display on the paper (the crazy retina screen is OGS full lamination). This is also a trend for the future.

If you can't make it, sell it again, buy a Nokia for dozens of dollars, and drop it casually!! If you are willing to pay a few dozen more, you can buy a color screen and bring ***!

No, 3C is originally a fully bonded screen, such a screen is expensive, take a look.

Hello landlord.

Poisoning can be killed.

ps: mobile phone viruses are killed with mobile phone security software, SD card poisoning, computer detection and killing of your mobile phone has security software, no, use antivirus software to kill (some must be rooted after killing).

Hello! Specific anti-virus steps:

1) Enter the housekeeper and find the virus detection and killing column in the security protection

Select Virus Scan.

Try installing a security software (e.g. Phone Manager, etc.). Take Phone Manager as an example, open Phone Manager, click on the main interface of the one-click physical examination to automatically detect the problems in the phone, and give treatment suggestions, click one-click to remove the virus program.

How can it be poisoned? You're thinking too much.

Restore factory settings, or go to customer service to flash the phone.

1. Problem phenomenon.

Due to the user's root flashing, the phone cannot be turned on, and the specific fault is manifested as "booting the screen to the logo interface or repeatedly restarting". For Huawei phones with the above problems, you can use the SD card forced recovery method in this article to deal with it.

2. Applicable product range:

This solution is applicable to DP series, G6xx series, G7xx series, C881X series, Honor series models, and Maimang series.

Column models. 3. SD card forced recovery method.

Step 1: Prepare an SD card with a capacity of more than 2G, it is recommended to use a brand SD card such as SanDisk, Kingston, etc.

Step 2: Format the SD card (optional).

Copy the AU file to the dload directory in the SD card (or create it manually in the dload folder yourself.)

Create a txt text file and rename it to au, please note that the file extension also needs to be within the rename range).

<>Step 7: When the phone is turned off, insert the SD card, just press the power on button, and the phone will automatically enter the SD card when it is turned on.

In the level mode, the upgrade process lasts about a few minutes (Note: You don't need to use key combinations, you can turn on the computer directly and the upgrade will start automatically).

Move the power button and battery to ensure that the machine is turned on normally.

Note: 1, use the SD card forced recovery method, after the recovery of the AU file in the dload folder will be automatically deleted, 2, if you need to restore again, you need to create or copy the file to the dload folder separately.

3. If you encounter a situation that cannot be repaired according to this method in actual operation, please arrange for the repair network to be sent for inspection and maintenance.

1: Prepare an SD card with a capacity of more than 1G, it is recommended to use Sandisk, Kingstone, or KingMax.

2: Use a computer to format the SD card (it is recommended not to choose quick formatting, format it according to the normal program, you can skip it).

3:**Huawei Honor 3 firmware package,There is**address provided below,**Unzip it first after it comes down,A dload directory will appear after the decompression is completed。 (Note that this directory is required).

4: Make sure that there are files in the dload directory, and then copy the entire dload to the root directory of the SD card. (Note: It must be the root directory, otherwise it cannot be flashed).

5: When the phone is turned off, insert the SD card, press the volume up button + volume down button + power on button at the same time, the phone will automatically enter the upgrade mode, and then start the upgrade.

6: Restart and wait for a few moments when finished.

No. The premise of the lower volume up button + the lower volume down button + the power on and off button is on the official website**The corresponding firmware is unzipped into the SD card Press this key combination to be effective The detailed tutorial is explained in the firmware package.

There are many problems of mobile phone crashing, mainly due to the following reasons:

1. Software conflict: or system compatibility problems, you can uninstall unnecessary software or conflicting software.

2. ROM problem: Try to choose the official release of the flashing ROM can effectively solve the problem of frequent crashes, or find a ROM with better system optimization.

3. Memory card problem: It can be solved by reformatting.

4. The machine has been flooded, fallen, aging components, etc., resulting in hardware problems, and this kind of problem is encountered.

Hardware problems generally refer to design flaws in the hardware itself, damage to the hardware, and improper operation. In this case, the phone can only be sent to the customer service center for service.

If your phone is constantly damp or subjected to strong vibrations, it may crash. So we try to avoid it and handle it with care.

Improper operation can also lead to crashes, especially when sending text messages, the key speed is too fast or the phone is continuously received in a short period of time, resulting in excessive load on the phone, and it will crash.

In addition, the phone can also freeze due to aging hardware.

Software problems are mainly caused by fatal bugs in the design of the software, and generally have the characteristic of crashing every time the same operation is performed. This is where a software upgrade will solve the problem!

There are also some special cases, such as refurbished machines, poor battery contact, such as keys not bouncing, etc.