What is the standard for IP69K

Updated on society 2024-08-12
3 answers
  1. Anonymous users2024-02-16

    IP69K: Capable of withstanding hot vapor washout tests as defined in EN 60529 and DIN 40050-9.

    Tier list. IPX-0 has no waterproof protection.

    The IPX-1 device, in normal operation, can provide waterproof protection equivalent to 3 5 mm minutes of rain for 10 minutes.

    The IPX-2 rating is basically the same as the IPX 1, but it can pass the water resistance test with a 15-degree upturn in all directions.

    The IPX-360 degree angle splash protection provides water protection at a flow rate of 10 liters per second for 2 to 5 minutes and a pressure of 80 100 nm.

    The IPX-4 rating is basically the same as the IPX 3, but it provides all-round and angular splash protection.

    The IPX-5 is waterproof in all directions and angles, providing waterproof protection at a flow rate of 2 to 3 minutes and a pressure of 30 nm.

    IPX-6 large wave waterproof protection, can last 2-3 minutes to resist a depth of 3 meters under water, a flow rate of 100 liters minutes, and a pressure of 100 nm.

    IPX-7 can be soaked for 30 minutes under 1 meter of water.

    The IPX-8 is thoroughly waterproof and can be used continuously in water for a long time.

    Waterproof mobile phone. Waterproof mobile phone is to achieve moisture-proof, rain-proof and even underwater operation for a certain period of time through a special waterproof shell or its own airtight workmanship.

    There are two kinds of waterproof mobile phones, one is waterproof itself, this kind of mobile phone is not afraid of rain, and some can also be used within 1 meter of water depth, but the time can only be limited to 30 minutes. The other is to install a waterproof device, as long as it is equipped with a diving box specially designed for waterproof mobile phones, the general mobile phone can be used in a water depth of 30 to 40 meters.

  2. Anonymous users2024-02-15

    IP69K, that is, it can withstand the cleaning of high-pressure and high-temperature water vapor while completely preventing dust intrusion, and the equipment can still operate normally.

    IP is the abbreviation of IngressProtection, IP rating is the level of protection against foreign body intrusion in the enclosure of electrical equipment, ** is the International Electrotechnical Commission standard IEC60529, this standard was also adopted as the American standard in 2004.

    IP69K protection level is divided into: "IP6X dustproof test chamber" and "IPX9K waterproof test chamber" two test chambers, according to IEC60529, ISO20653, DIN40050-9 and other test standards in the "shell protection level (IP**)" design and manufacturing, suitable for electrical products to carry out the first characteristic number of "IP6X", the second characteristic number of "IPX9K" protection level test.

    Understanding of the Standards:

    These IP protection levels are often not properly understood or applied incorrectly. For example, many users believe that IP67 or IP68 protection allows the device to be put in the water for a specified period of time while working properly. This is not the case, and these levels of protection only guarantee that the equipment will still operate properly after it is removed from the water.

    Another possible misconception is that meeting IP69K means automatically meeting IP67 and IP68. In fact, IP69K only protects against washout pressure and is not suitable for applications submerged in water. As a result, IP69K ratings are often used in applications where frequent washes are washed, such as in breweries, car washes, and food and beverage plants, but are not suitable for applications where equipment is completely submerged in water.

  3. Anonymous users2024-02-14

    IP69K: Capable of withstanding hot vapor washout tests as defined in EN 60529 and DIN 40050-9. This provides protection at a water pressure of 100 bar (1450 psi) and a temperature of 80 C.

    The pressure is applied directly to the sensor in 30-degree increments (0, 30, 60 and 90 degrees) for 30 seconds at each angle for a total of 120 seconds (2 minutes) to prevent water from entering.

Related questions
13 answers2024-08-12

2. The construction should reflect the professionalism of enterprise customers. Only professionalism can improve the overall image of the company. 3. The construction cannot be separated from the actual situation of the enterprise, and it is emphasized that the enterprise should do things according to the scale of the enterprise to do the best for the development of the enterprise. >>>More

15 answers2024-08-12

There is no lack of beauty in this world, what is missing is the eye to find it. However, the answer to the question of what beauty is and what constitutes beauty is different for everyone. The so-called each flower into its own eyes, this question also worries me. >>>More

6 answers2024-08-12

You go to the "Gongbiao Network" to check your standard number and keywords, the standard input of the Gongbiao Network is very large, and I heard that there are more than 100,000 standards. >>>More

6 answers2024-08-12

It depends on the level of the players. Most of the players entered the CBA through universities, such as Wang Shipeng, who is a student of Guangzhou Institute of Physical Education, and Yi Jianlian and Zhu Fangyu, both of whom are from Guangdong University of Technology. You can be admitted to Guangti and Guanggong. >>>More

5 answers2024-08-12

Honey source environment.

The environment of the honey source directly affects the quality of honey. Many friends may have heard that one of the main reasons for the detection of heavy metals in honey is that the environment of the honey source is polluted. If you want to get high-quality honey, you must stay away from these places, such as railways, factories and mines, institutions, schools, livestock farms, etc. >>>More