What are the human and geographical characteristics of China s major plateaus, plains, and basins?

The plateau should be mainly the Qinghai-Tibet Plateau, the plain should be the North China Plain, and the Northeast Plain basin, for example, the Sichuan Basin, the geography and humanities of these regions should be different, for example, a difference in climate, the plateau area should be a temperate continental climate, and the plain area should also be temperate.

These few words of yours summarize the geographical knowledge of the motherland, and I really help you look forward to it.

First, the four plateaus.

1. Qinghai-Tibet Plateau:

The terrain is high, with an average altitude of more than 4,000 meters, and many snow-capped mountains and glaciers. The area is large, accounting for 1 4 of the country's area. There are many mountains on the plateau, but the relative height is small.

2. Inner Mongolia Plateau:

The terrain is gently undulating and there are few mountains. It is the second largest plateau in China, with an average altitude of 1,000 meters. There are many grasslands in the east and Gobi and deserts in the west.

3. Yunnan-Guizhou Plateau:

The terrain is rugged, 1000 2000 meters above sea level. Many canyons, many small mountain basins. Limestone is widely distributed and mostly typical karst terrain.

4. Loess Plateau:

At an altitude of 1000 2000 meters, the surface is covered with deep loess. The surface is broken, and the ravines are criss-crossed. Vegetation cover is scarce and soil erosion is severe.

2. Four major basins.

1. Tarim Basin:

It is the largest inland basin in China, a large closed intermountain basin, the landform is distributed in a ring, belongs to the warm temperate climate, and the reserves of oil and natural gas resources in China are very rich, accounting for about 1 6 and 1 4 of the national oil and gas resources respectively.

2. Junggar Basin:

There are large areas of desert, mostly semi-fluid in nature; Typical wind-eroded landforms are widespread. Wuerhe in northern Xinjiang, because of its typical Yadan landform, has become a well-known "devil's city".

3. Qaidam Basin:

It is located in the northern part of the Qinghai-Tibet Plateau, in Qinghai Province. It is the highest basin in China. Historically, it used to be a large saltwater lake, but as the terrain was raised, the plateau became more and more arid, and the large saltwater lake became a large dry salt lake.

The Qaidam Basin is known as the "cornucopia". Because it contains a large amount of salt, it is called "Wanzhang Salt Bridge". At the same time, it also contains a large number of minerals such as coal, oil, potash and lead-zinc ore.

4. Sichuan Basin:

It is located in the eastern part of Sichuan Province and the western part of Chongqing Municipality. This is the largest outflow basin in our country, and it is also the richest basin in our country.

The main characteristics are: the land of abundance, rich in products; The main stream of the Yangtze River passes through, with many tributaries and abundant water and heat resources; Famous mountains and beautiful rivers, plus a large number of cultural tourism resources. Therefore, the Sichuan Basin is the most developed basin for tourism in China.

3. The Three Great Plains.

1. Northeast Plain:

Located in the east of the three northeastern provinces and the Inner Mongolia Autonomous Region, it is the largest plain in China, consisting of three small plains: the Songnen Plain, the Liaohe Plain and the Sanjiang Plain.

2. North China Plain:

Located in Hebei Province, Henan Province, Anhui Province, Jiangsu Province, Shandong Province, Beijing City, Tianjin City, the Yellow River, Haihe River, Huaihe River and its tributaries are alluvial, so the east is called the Huang-Huai-Hai Plain, and the west is called the "Central Plains", the terrain is flat, and there are many rivers.

3. Plain in the middle and lower reaches of the Yangtze River:

Located in Hubei Province, Hunan Province, Anhui Province, Jiangxi Province, Jiangsu Province, Zhejiang Province, Shanghai on both sides of the Yangtze River, by the Yangtze River and the Han River, Gan River, Xiangjiang River and other tributaries alluvial, low-lying terrain, dense rivers, many lakes and depressions, has the reputation of "the land of fish and rice".

FYI.

The terrain types are as follows:

1. A large area with flat or small undulations on the plain, generally below 200 meters above sea level, is divided into independent plains and subordinate plains. 2. The plateau is more than 1000 meters, with little undulation, steep edge and vast area. 3. The terrain of hills with an altitude of more than 200 meters and less than 500 meters is composed of continuous low hills, with a gentle slope and a relative height of no more than 200 meters.

4. The mountain area is more than 500 meters, the slope is steep, the valley is deep, the form is peculiar and diverse, and it is continuous. 5. The middle of the basin is low and the surrounding is high, generally the middle refers to the hills or plains, and the surrounding refers to the plateau or mountain range Basins are mainly divided into two types, one is the tectonic basin formed by the tectonic movement of the earth's crust, and the other is the erosion basin formed by the erosion of glacial flowing water.

The elevation of the plain is below 200 meters, and the contour line is sparse The altitude of the plateau is generally greater than 1000 meters, the middle is high, and the surrounding is low, and the middle terrain is relatively gentle The mountain elevation is greater than 500 meters, and the contour line is dense The elevation of the hills is 200 500 meters, and the terrain is undulating The basin is low in the middle and high on all sides.

In addition to mountains, hills, plateaus, and basins, common terrains include plains, swamps, meadows, etc.

In addition to the 3d ghost plains, the plateau basin, and those people, this and the plains, our side, there are many plains in the south.

Summary. Boundary between the Loess Plateau and the North China Plain: Taihang Mountains.

The boundary between the Sichuan Basin and the middle and lower reaches of the Yangtze River Plain: Wushan. The boundary between the Yunnan-Guizhou Plateau and the Qinghai-Tibet Plateau:

Hengduan Mountains. The boundary between the Junggar Basin and the Tarim Basin: the Tianshan Mountains.

Boundary between the Tibetan Plateau and the Tarim Basin: Kunlun Mountains. The boundary between the Loess Plateau and the Hanshui Valley:

Qinling. Hexi Corridor and Qaidam Basin Boundary: Qilian Mountains.

The boundary between the Sichuan Basin and the Hanshui Valley: Daba Mountains. Boundary between the Inner Mongolia Plateau and the Loess Plateau:

The Great Wall of China. The boundary between the middle and lower reaches of the Yangtze River Plain and the North China Plain: Huai River.

What are the four major plateaus, four major basins, and three major plains in China as the dividing line?

Please wait a minute, we need time to type, please understand.

Boundary between the Loess Plateau and the North China Plain: Taihang Mountains. The boundary between the Sichuan Basin and the middle and lower reaches of the Yangtze River Plain:

Wushan. Boundary between the Yunnan-Guizhou Plateau and the Qinghai-Tibet Plateau: Hengduan Mountains.

The boundary between the Junggar Basin and the Tarim Basin: the Tianshan Mountains. Boundary between the Tibetan Plateau and the Tarim Basin:

Kunlun Mountains. The boundary between the Loess Cracked Pure Plateau and the Han Huaishui Valley: Qinling.

Boundary between Hexi Corridor and Qaidam Basin: Qiming Orange Mountains. Boundary between the Sichuan Basin and the Hanshui Valley:

Big Bus Mountains. Boundary between the Inner Mongolia Plateau and the Loess Plateau: the Ancient Great Wall.

The boundary between the middle and lower reaches of the Yangtze River Plain and the North China Plain: Huai River.

That's not the case.

Can you send me the questions? I'll take a look at it for you.

And this question.

Thank you. These are based on the first, second, and third tiers as the dividing line, diversified and old-fashioned agriculture, the eastern region is relatively flat, and the cultivated land area is large, which is conducive to the development of planting industry and animal husbandry in the land. That's the whole answer, take a look.

Four major plateaus: Qinghai-Tibet Plateau, Inner Mongolia Plateau, Loess Plateau, Yunnan-Guizhou Plateau.

Four major basins: Tarim Basin, Junggar Basin, Qaidam Basin, and Sichuan Basin.

Three major plains: the Northeast Plain, the North China Plain, and the middle and lower reaches of the Yangtze River Plain.

The three major hills, Liaodong hills, Shandong hills, and southeast hills.

To understand these three concepts, we must first understand the concepts of topography and topography.

Topography refers to the internal morphology of an area, i.e., plateaus, basins, and plains above.

And topography refers to the contrast between an area and the surrounding area, such as the elevation of the basin you mentioned.

A basin is a place that is concave compared to the surrounding area.

Plains generally refer to places below 200 meters above sea level, and the terrain is relatively flat.

Plateau generally refers to the place above 2000 meters above sea level, generally speaking, the surface of the plateau is relatively flat, such as the Inner Mongolia Plateau, but not all, such as the Loess Plateau, the rugged Yunnan-Guizhou Plateau.

The plain is a broad, flat, and very undulating morphological type. According to the altitude, it can be divided into two categories: low plains and high plains. The low plains are low and gentle, with very little cutting depth and cutting density.

The high plains are referred to as plateaus, and due to the high terrain, the cutting is relatively strong. When a plain is surrounded by mountains, a new kind of landform basin is formed.

Four major plateaus: Qinghai-Tibet Plateau, Inner Mongolia Plateau, Yunnan-Guizhou Plateau, and Loess Plateau.

Three major plains: the Northeast Plain, the North China Plain, and the middle and lower reaches of the Yangtze River Plain.

Four major basins: Junggar Basin, Tarim Basin, Qaidam Basin, Sichuan Basin, and Turpan Basin.

Three hills: Liaodong hills.

Shandong hills. Southeastern hills.

The four major plateaus are: the Qinghai-Tibet Plateau, the Inner Mongolia Plateau, the Loess Plateau and the Yunnan-Guizhou Plateau.

Four major basins: Tarim Basin, Junggar Basin, Qaidam Basin and Sichuan Basin.

Three major plains: the Northeast Plain, the North China Plain, and the middle and lower reaches of the Yangtze River Plain.