How to install the thermostat of the fresh keeping cabinet and how to adjust the temperature of the

The thermostat does not need to be adjusted. No special tools are required for installation. You just remove the original one and install it in the opposite program.

Note: After unscrewing the screws of the box containing the thermostat, it should be slid forward (back) a little before it can be removed; The thermostat has a long tail (which is thermosensing) to be attached to the condensation plate.

I remember to try to buy a thermostat, that is, there is a refrigerator in the store, specially used to try the thermostat, put the thermostat in the freezer, connect two leads outside, when the thermostat works, the controlled light-emitting diode will automatically extinguish, such a thermostat can be used 100% when bought back (thermostat, after being frozen in the refrigerator, try it with a multimeter, the two binding posts are not on, try again after taking it out, it is on, it proves that the thermostat is not damaged, reinstall it, adjust the temperature screw to stop, Problem solving. If you don't try it, after you buy it back and try it, if you can't use it, it's very troublesome, and sometimes you can't adjust it for a few hours. This is my experience for you to refer to.

As for replacing it, it is not difficult, and the key thermostat must be usable. If you find it more troublesome to replace, it may be better to try the refrigerator bosom friend (refrigerator timer). **Not expensive, good results.

<> turn on first: Press the power on button of the first red sign on the far left for about 1-2 seconds, and the freezer will display the temperature at a high level, indicating that it has been turned on. How to adjust the temperature:

According to the set, the plate button is set for about 2-3 seconds, the freezer emits the sound of light dust droplets, and when the temperature beats and flashes, you can press the up and down keys to adjust the temperature to set the temperature; No need to press any buttons to set the temperature after 30s automatic weight memory to save the set.

The working principle of the fresh-keeping cabinet is that the compressor achieves the effect of refrigeration by compressing the physical changes generated by the coolant, but the temperature of the fresh-keeping cabinet will be affected by the environment of the outer brother, especially in the summer and winter, where the temperature changes are relatively large, the external environment will affect the normal operation of the fresh-keeping cabinet, so the temperature of the fresh-keeping cabinet should be adjusted in different seasons.

Refrigerator thermostat in general.

It is installed on the top of the top of the refrigerator, and depending on the refrigerator, some are on the panel of the refrigerator, and some are in the refrigerator. The thermostat is mainly used to control the compressor within a certain temperature difference range according to the requirements of the refrigerator. The refrigerators used in many homes are more traditional refrigerators with upper and lower doors and no main panel.

In this kind of refrigerator, its thermostat is basically installed on the side of the inside of the refrigerator, and you can see it when you open the refrigerator. In most cases, it is a mechanical knob with a dial scale that allows you to set the temperature of the refrigerator depending on the situation. The other is the popular double-door and three-door refrigerators.

The thermostat of this type of refrigerator is basically on the main panel on the front of the refrigerator, in the form of a lower display, and is equipped with options such as freezing, freshness, and quick freezing, and even has a temperature setting. The correct use of the temperature control of the refrigerator can ensure that we can accurately grasp the temperature in the refrigerator when using the refrigerator. With the change of seasons, the temperature in the refrigerator should also change, and adjusting the refrigerator thermostat in time can make the food both fresh and good to achieve the effect of energy saving.

Extended information A: The refrigerator thermostat is based on the temperature requirements of the refrigerator, within a certain temperature difference range, the opening and stopping of the refrigeration compressor is automatically controlled, so that the temperature in the refrigerator is kept within the range of a given value. In addition to the temperature controller, there is also a temperature damper (also known as an automatic damper temperature controller) that automatically adjusts the amount of cold air entering the refrigerator to achieve temperature control.

Good morning, dear, it's an honor to answer for you. The temperature of the fresh-keeping cabinet is adjusted according to the following steps: 1. Open the door of the fresh-keeping cabinet and find the temperature control panel.

2. According to the logo or instruction manual on the fresh-keeping cabinet, confirm the functions of different buttons or knobs on the panel. 3. Adjust the temperature of the fresh-keeping cabinet by pressing or rotating the adjustment button or knob on the panel. 4. Adjust the humidity of the fresh-keeping cabinet as needed.

Some cabinets may have special buttons or knobs to control humidity, while others may need to maintain a certain amount of humidity while controlling the amount of ventilation in the storage area, so as to achieve humidity adjustment. 5. After the adjustment is completed, wait for a period of time to stabilize the temperature and humidity inside the fresh-keeping cabinet, and check whether it meets the expected settings. The fresh-keeping cabinet is a kind of household appliance that can prolong the preservation time of food, and its main function is to prevent food from spoiling by controlling temperature and humidity.

I hope mine can help you

1.The temperature selection and adjustment of the fresh-keeping cabinet temperature control optional button is basically 0,1,2,3,4,5,6,7. The higher the number, the lower the temperature of the crisper.

Generally speaking, we only need to adjust the temperature of the fresh-keeping cabinet to 3 o'clock in spring and autumn, and adjust the temperature of the fresh-keeping cabinet to the point in summer, so as to achieve better energy-saving effects. 2.The wrong method of adjustment is unacceptable.

Beware of the wrong temperature adjustment method of the fresh-keeping cabinet to avoid damage to the compressor! There may be people who have such a wrong way of adjusting. It is not right to set the temperature of the crisper very low in winter and high in summer.

When our ambient temperature drops to very low, if the temperature of your crisper is kept at about 3 gear, the compressor of the crisper will stop working, but at this time the temperature of your refrigerator does not actually reach the normal refrigeration temperature. In order to achieve a normal refrigerated room temperature of 18 degrees, the compressor of the fresh-keeping cabinet will start and stop frequently. At this time, not only does it not save power, but it will also cause excessive consumption of electrical energy and more serious compression damage.

1. Select and adjust the temperature of the fresh-keeping cabinet.

The temperature control optional button of the fresh-keeping cabinet is basically the file, the larger the number, the lower the temperature of the refrigerator of the fresh-keeping cabinet, in general, in the spring and autumn we only need to adjust the temperature of the fresh-keeping cabinet to between 3, and the temperature of the fresh-keeping cabinet is adjusted to 1 or 2 gears in summer, so as to achieve a better energy-saving effect.

2. The wrong adjustment method is unacceptable.

Be wary of the wrong method of temperature adjustment of the fresh-keeping cabinet to prevent damage to the compressor! Maybe someone may have such a wrong adjustment method, in winter the temperature of the fresh-keeping cabinet is adjusted very low, and in the summer the temperature of the fresh-keeping cabinet is adjusted very high, this is actually the wrong approach, when our ambient temperature drops to very low, if the temperature of the fresh-keeping cabinet is still maintained at about 3 gears, the fresh-keeping cabinet compressor will stop working, but at this time your refrigerator temperature is actually not up to the normal refrigeration temperature.

In order to achieve the normal temperature of 18 degrees in the refrigerator, the compressor of the fresh-keeping cabinet will start frequently and shut down frequently, which not only can not save electricity, but will cause excessive consumption of electric energy, and at the same time cause more serious compression damage.

Hello, I have seen your question, and I am sorting out the answer, please wait for a while 1 In the hot summer, the food must be placed reasonably, otherwise it is very easy to deteriorate, there is a wide variable greenhouse in the fresh-keeping cabinet, and the temperature can be adjusted in a very wide range to meet the temperature between minus 12 degrees and minus 10 degrees, most of the fresh-keeping cabinets are intelligent temperature changes, but the temperature of different food storage is different, and if you want to be insured for a long time, you also need to manually adjust the temperature of the fresh-keeping cabinetto make sure the food is stored longer. 2. The temperature adjustment of the fresh-keeping cabinet at minus 7 degrees Celsius belongs to the soft freezing mode of the fresh-keeping cabinet, which is very suitable for storing some meat products at this time, which can achieve the effect of insurance and not all of the freezing, and can be more aspected and sliced when taking it out, so it can be more difficult to thaw when taking out the slices, but the ambient temperature in different regions can have narrow points, so the addition and subtraction of one degree can meet the greater preservation effect when adjusting. 3. The refrigerated room of the fresh-keeping cabinet is actually the insurance room, the humidity here is relatively high, if it is used to store vegetable products, if you want to achieve the effect of long-term freshness, the temperature needs to be adjusted between zero degrees and 10 degrees Celsius, and it is best not to clean the vegetables in advance when storing.

Because the humidity in the fresh-keeping cabinet will increase after cleaning, the temperature adjustment will not be of much significance, and the water will take away the surrounding temperature when it evaporates.

Questions. How to adjust the temperature of Dingbang's air-cooled display cabinet.

Wait a minute. First of all, you need to know that the number on the thermostat knob does not indicate the specific temperature value in the refrigerator, but indicates the temperature level controlled, the smaller the number, the higher the temperature in the box. At room temperature, the first gear can be controlled at about 9 degrees Celsius, and the seventh gear can be controlled at about 1 degree Celsius.

2Then, find the "Set set" button on the thermostat of the air-cooled display cabinet and press and hold it for about 3 seconds until the thermostat appears "upside down F5"3 Then, the adjustment of the knob gear of the thermostat is generally based on the following principles, under ordinary weather conditions, the spring and autumn shall prevail, the gear is set in 2-4 gears, and the temperature in the box is 6-7, which can meet the needs of daily household use. 4. When the upside-down "F5" appears on the thermostat, immediately press the "Set SET" button again and let go, and the number 5 will flash on the thermostat, it should be noted that the temperature control gear is adjusted with the change of the season in order to save electricity, but if the temperature is too low in winter, although the refrigerator is easy to reach the set temperature. 6. At this time, you can press the triangle symbol next to the set key to adjust the temperature: "up key" (turn up) or "like down key" (turn down).

1.If the thermostat of the refrigerator is broken, it may cause it not to start (it does not start in other gears), you can adjust the thermostat of the refrigerator to the highest gear, if it can be started, it proves that the thermostat is bad (the highest gear is out of the thermostat control).

2.A broken thermostat can also cause non-downtime. (If the refrigerator is refrigerated normally and has been working without stopping, then the thermostat is broken and can be replaced).

3.If the refrigerator has electricity (the light is on), but the compressor does not work, then you need to measure whether the compressor has power supply, if there is no power supply, then it means that the thermostat has no voltage output, you can judge that the thermostat is open, and replace the thermostat.

This is very laborious to buy, it is better to buy an electronic thermostat, it is simple to use, **cheap!

Installation method: Plug the refrigerator into the thermostat, and then plug the thermostat into the power supply. It is equivalent to the power plug board, thermostat, and refrigerator used in series.

Then adjust the two knobs so that the pointer of the knob points to the corresponding position, and the specific time is as follows:1Summer:

Stop for 15 minutes. Transport**40 minutes.

2.Winter: 30-minute stop.

Transport**10 minutes. 3.

Spring and autumn: stop for 20 minutes, run for 20 minutes.

You just need to plug the fridge into the thermostat and plug the thermostat into the power supply.

Plug in the thermostat in the refrigerator and plug in the power supply for the thermostat.

The lower part of the machine is equipped with infrared heating tubes, and the upper layer and the light window are equipped with lighting, which has the function of keeping food warm and can enhance the display effect of food. 2. Put the container containing food into the insulated display cabinet and plug in the liquid grip power supply. bv---808：

Turn on the heating switch and lighting switch, and the heating element starts to work at this time, so that the alarm wheel food is in a warm state. There is a thermostat inside the machine to keep the internal insulation temperature at about 65C.