What kind of board is solid wood plywood What is solid wood plywood?

Solid wood plywood is divided into multi-layer solid wood plywood and three-layer solid wood plywood.

Traditional hardwood flooring is a single piece of wood made from the floor.

Solid wood plywood divides the floor into multiple wood layers, the wood of these multiple wood layers is different, the surface layer is mostly the wood of the name of the wood sold, and the lower layer is mostly made of other wood of high hardness. For example, pine, willow.

Solid wood plywood is suitable as a floor for geothermal heating. Because the solid wood plywood is a multi-layer structure, it relieves the expansion force of geothermal heat on the wood, which is equivalent to the cushioning effect.

There are only three layers of solid wood three-layer composite panels, the top layer belongs to the material mentioned in this floor, and the bottom layer is usually other materials.

Parquet is divided into multi-layer solid wood flooring and three-layer solid wood flooring, and the material is mostly oak.

Birch, ash, mulberry, eggplant, pineapple.

teak, etc. Parquet flooring is divided into multi-layer solid wood flooring and three-layer solid wood flooring. The three-layer parquet is made of three-layer solid wood structure staggered lamination, and its surface layer is mostly precious and high-quality perennial broad-leaved hardwood, and the material species are mostly oak, birch, ash, mulberry, mantle, pineapple lattice, teak, etc.

However, due to its incomparable grain characteristics and cost-effectiveness, oak wood has become the most popular tree species. The core layer is composed of ordinary soft and miscellaneous wood slats, and the tree species is mostly pine.

poplar wood, etc.; The bottom layer is rotary cut veneer, and the tree species are mostly poplar, birch and pine.

Three-layer structural panels.

Laminated with glue, multi-layer parquet is made of multi-layer plywood.

It is the base system, which is laminated with a panel of hard sheet panels or veneers.

Solid wood composite board is a kind of staggered lamination of different tree species, which can overcome the shortcomings of solid wood flooring to a certain extent, so that its dry shrinkage and wet expansion rate becomes smaller, and has many advantages such as natural wood feeling, easy installation, anti-corrosion, moisture-proof, etc. As a new solid wood board, solid wood composite board can also be divided into multi-layer solid wood board and three-layer solid wood board, which is generally suitable for bedrooms, living rooms, study and other parts of ordinary residences.

Parquet is a floor decoration material formed by drying and processing wood.

Solid wood parquet is made of staggered lamination of different tree species, which overcomes the shortcomings of wet expansion and dry contraction of solid wood floor to a certain extent, has a small dry shrinkage and wet expansion rate, has good dimensional stability, and retains the natural wood grain and comfortable foot feeling of solid wood flooring, and has the stability of laminate flooring and the aesthetics of solid wood flooring, which has environmental protection advantages.

Parquet is a type of wood flooring derived from the solid wood flooring family, so it is actually a new type of solid wood flooring. With its natural wood feel, easy installation and maintenance, anti-corrosion and moisture-proof, antibacterial and suitable for electric heating, it has become the main popular type of flooring in Europe and the United States, and is gradually accepted by the people of China.

Features of solid wood plywood:

1. Easy to care for and clean: the care is simple, bright as new, no dirt, and easy to clean. The surface of parquet is well painted, wear-resistant, and does not require much effort to maintain.

It is understood that the good parquet on the market will not wax within 3 years, and it can also maintain the brilliance of the lacquer surface as new. This is in stark contrast to the maintenance of hardwood floors.

2. Stable quality and not easy to damage: because the substrate of the parquet is made of multi-layer veneer, the wood fibers crisscross into a network of laminated combinations, so that the various internal stresses of the wood are adapted to each other between the laminates, which ensures the flatness and stability of the wood floor, and retains the aesthetics of the solid wood floor, which can not only enjoy the warmth of the original ecology, but also solve the shortcomings of the difficult maintenance of the solid wood floor, and is the beautiful crystallization of laminate flooring and solid wood flooring.

3. Affordable: Due to the unique relationship of the structure, the requirements for wood are not so high, and the material can be fully utilized, so it is much lower than that of solid wood flooring.

4. Simple installation: the installation of parquet is the same as that of laminate flooring, without hitting the keel, as long as it is leveled, and the floor height can be improved. And because of the simple installation requirements, it also greatly reduces the hidden dangers caused by installation.

Solid wood plywood is a new type of solid wood board made by cross-pressing the boards of various tree species. To a certain extent, the solid wood plywood overcomes the shortcomings of the wet expansion and contraction of the solid wood floor, making the dry shrinkage and wet expansion rate smaller, and at the same time, it also retains the natural texture and comfortable foot feeling of the board. Nowadays, solid wood composite board is gradually accepted and used by everyone with many advantages such as natural wood feeling, easy installation, anti-corrosion, moisture-proof, etc.

What are the common types of plates?

1. Solid wood board.

The solid wood board is made of whole wood, and its sturdy and durable, natural and clear grain characteristics make it a leader in the board, but the cost of solid wood board and the requirements for construction technology are higher, which is more suitable for high-end decoration.

2. a splint. Splint tremor is also known as glued spike board, also known as fine core board, which is usually made of three or more layers of 1cm veneer hot pressing, and is one of the most common plates. There are many failures of the Guiming clan of the plywood, including:

18 centiboard, 15 clintimal board, 12 clam board, 9 clam board, 5 clam board, 3 clam board.

3. Decorative panels.

Decorative panel is a common high-grade decorative material, which is a decorative panel with a thickness of about 3 cm made by planing solid wood boards into ultra-thin veneer with a thickness of only about millimeters, using plywood as the base material, and gluing process.

4. Blockboard.

Blockboard, also known as large core board, is made of two pieces of veneer bonded wood, which is cheap and has high transverse bending strength, but poor vertical bending strength.

5. Particleboard.

Particleboard is made of wood scraps and glue pressing, which is generally divided into two types: extruded and flat-pressed particleboard, which has low strength and is cheap.

6. MDF.

MDF, also known as fiberboard, is made of wood fiber and plant fiber as raw materials and added adhesives, and is characterized by impact resistance and rich shapes.

7. a fireproof board.

The main raw material of the fireproof board is siliceous or calcareous material, and chemical additives such as fiber materials are added, and the decorative board formed by autoclaving is usually slightly higher due to the high production process. The thickness of fireproof board is generally three: millimeter, 1 millimeter and millimeter.

8. Melamine board.

Melamine board is a decorative board obtained by mixing different colors of paper with melamine resin adhesive and drying it, which is welcomed by many consumers because of its rich color.

Solid wood plywood is a new solid wood board made of boards of various tree species that are cross-layered and pressed.

Solid wood plywood is a kind of board composed of multiple wood layers staggered pressing, thus also ensuring the flatness and stability of the wood floor and has a natural wood feel, with easy installation, anti-corrosion, moisture-proof and other advantages, and the solid wood plywood to a certain extent also overcomes the shortcomings of the solid wood floor damp dry expansion and contraction, is to absorb the common advantages of wood floor and solid wood floor, can be applied to ordinary residential areas including bedrooms, study and living room and other parts.

The difference between solid wood composite and solid wood multi-layer.

1. **Different.

Solid wood multi-layer is usually made of precious tree species as raw materials, and the multi-layer criss-crossing wood flakes are bonded and compounded through a special process, which is relatively high. The solid wood composite has less high requirements for wood, and the ** is relatively low.

2. Different core materials and different environmental protection.

The core material of solid wood multi-layer is pressed layer by layer of solid wood board, the amount of glue is less, and the environmental protection performance is relatively excellent, while the core material of solid wood composite is mainly wood chips, with more glue and relatively poor environmental protection.

3. The performance characteristics are different.

The solid wood multi-layer is made of natural solid wood, which has excellent foot feel, is not easy to deform and crack, is less affected by dry shrinkage and expansion, and has relatively poor moisture-proof ability, while the wear resistance of solid wood composite is relatively excellent and not easy to deform.

Solid wood plywood is made of cross-laminated panels of different tree species. To a certain extent, it also overcomes the shortcomings of the wet expansion and contraction of the solid wood floor, so that the dry shrinkage and wet expansion rate becomes smaller; Of course, the natural texture and comfortable feel of the plate are also retained. With many advantages such as natural wood feeling, easy installation, anti-corrosion, moisture-proof, etc., it has gradually been accepted and used by everyone.

As a new type of solid wood flooring, it is also divided into two types: multi-layer solid wood flooring and three-layer solid wood flooring. The surface is very well treated with paint and does not require much maintenance. It is understood that if the parquet is not waxed within 3 years, it can still maintain the brilliance of the paint surface.

Solid wood plywood is divided into multi-layer solid wood plywood and three-layer solid wood plywood. Horizon solid wood plywood, the floor is divided into multiple wood layers, the wood of these multiple wood layers is not the same in the sleepy branches, the surface layer is mostly the wood of the name of the wood sold, and the lower layer is mostly made of other wood of high hardness.

First of all, solid wood plywood is easier to take care of than solid wood, and it does not need to spend much time and energy to do the corresponding Wangshan maintenance, and it also saves a lot of money. At the same time, it is relatively easy to install, which can reduce the probability of damage due to the hardness of the plate during installation. Of course, when you buy solid wood plywood, you should pay attention to the difference between the brand and the first.