-
A little bit of it is fine. I tried it too. It's okay to get past it, no more than 2 minutes, but if it's serious, it's like the one upstairs said. If you want to see the sun tomorrow, go to the hospital.
While 502 brings convenience, sometimes it will accidentally stick to things that you don't want to paste, and the ways to remove them are: 502
1. Use banana water to drop on the glue stain, and at the same time use the old toothbrush to continuously stir and brush, wait for the glue stain to become soft and take off, then rinse with water, brush repeatedly, and brush until it is clean. Put an absorbent cloth on the back of the garment with glue marks, then apply some white vinegar to the glue marks, and finally scrub it clean with cotton dipped in water.
2. With insulating oil, pour the insulating oil in the transformer on the table, 502 glue will soon become soft, and it can be rubbed off quickly Glue is a kind of resin glue, as long as you use an organic solvent that dissolves the resin, such as acetone. However, acetone is toxic if inhaled, so pay attention to how to use it, and you can stuff the adhesive part into the bottle. It is said that if you freeze it in the refrigerator, the glue will fall off, so you can try it first.
4. Stick 502 glue on a small area, as long as you soak it in hot water, if a large area is stained with 502 glue, coated with acetone, and wait for about 5 10 minutes to remove.
5. Acetone, gasoline, sesame oil, etc. are recommended, pour some insulating oil in the transformer on your hands, and the 502 glue will soon become soft and easy to rub off.
6. Closed heating can be used.
-
Hurry up and call ** to your loved ones, this must go to the hospital!
-
Everybody come and help me, I'm the one with my eyelids and eyeballs sticking together.
-
A 12-year-old boy was poured 502 glue on his eyes by his classmates, what should we do when his eyes accidentally get the glue?
1. First of all, the first time is to prepare a basin of cold water to rinse the eyes first, the way to rinse the eyes is to separate the upper and lower cheeks with the index finger and thumb, and if necessary, flip the eyelid components to expose the conjunctiva.
2. It plays a role in relieving symptoms from the time of rinsing, but do not rub your eyes at this time, no matter whether your glue is all rinsed off, you must go to the ophthalmology department of the hospital for examination as soon as possible. Because there are a lot of small dots of glue, our right eye is invisible, and long-term adhesion to the eyeball will cause great damage to the eyeball, so we must go to the ophthalmology emergency department to diagnose the condition, and then **.
3. If the eye and the mucous membrane are attached together, you can cover the injured eye with warm salt water or gauze, and then use a sterilized cotton swab to slowly separate the upper and lower eyelashes, so that the eyes on both sides can open naturally.
Such an incident happened in Qingdao, Shandong, when a little boy was writing his homework in the management list, he was handed over a bottle of 502 glue from his head by his classmates, and the water was fine, which proved that the classmate consciously closed his eyes, but in an instant his eyelids and eyelashes were picked up and glued together, and he couldn't open his eyes. Fortunately, after the child was admitted to the hospital, the eyelids were separated by local anesthetic surgery, and the child is recovering well with no sequelae.
We all know that 502 glue is very strong for this kind of bonding thingAlthough 502 glue can help people bond damaged things, sometimes it is difficult to go if you really don't pay attention to it, and if you see your eyes, the consequences are really unimaginable. 502 glue only takes a few minutes to make damaged things firm, so people also call it all-purpose glue, but 502 glue also has a certain toxicity, produces nutrients to the nervous system, and if people go in from time to time, it will also cause certain damage to the body.
In life, there will be some bear children who do such incomprehensible things, so we must take certain measures to deal with these emergencies to avoid the occurrence of these emergencies, and children must also learn to protect themselves.
-
If it is an ordinary glue, you can rinse it with a lot of water immediately, and you don't need to worry about it if you don't feel uncomfortable, but if it is a glue with chemicals such as super glue, it is recommended to see an ophthalmologist immediately.
-
The first time you should prepare a basin of cold water to rinse your eyes. Method of eye irrigation: Separate the upper and lower eyelids with the index finger and thumb during irrigation, and flip the eyelids if necessary to fully expose the conjunctiva.
Rinse the affected eye with a water bottle from the medial canthus to the lateral canthus, and rotate the eyeball up and down, left and right to flush all parts of the conjunctival sac, be careful not to flush directly with the cornea, the distance between the kettle and the eye should not be too close to the eyeball, and the impact should not be too far away to damage the eyeball. The right distance has a certain momentum to flush some of the glue out of the eye. It should be reminded that if patients with corneal inflammation, ulcers and other diseases should not be rinsed, so as not to aggravate the condition such as corneal perforation.
-
When the glue accidentally sticks to the eyes, we should immediately call 120 to let the doctor treat our eyes, and never torture our eyes alone.
-
If glue sticks to your eyes, be sure to rinse your eyes with running water and seek medical attention as soon as possible, otherwise it is likely to have a serious impact on your vision.
-
(1) Wash against time.
As soon as acid or alkali chemicals get into your eyes, no matter where you are in a factory, school, laboratory or home, immediately rinse with plenty of water, whether it is cool boiled water, tap water, river water or well water, where every second counts. When rinsing, open the eyelids so that the water can rinse the eyes directly, and rinse repeatedly for at least 15 minutes.
2) Remove the residual chemicals.
After rinsing, take a closer look at the eyelid conjunctiva for any remaining chemicals. If there are solid chemical particles, use a cotton swab or clip to pick them up, not by hand.
3) Go to the hospital.
After the above treatment, patients with eye injuries caused by any kind of acid-base chemicals should go to the hospital for further examination and treatment, which is very important for prognosis and should not be ignored.
-
Dizzy, wash first, clean with plenty of water, and go to the hospital quickly if it is serious.
1. Rinse with water in time
If 502 enters the eyes, rinse it with water immediately, flush off most of the 502 glue 2, and then rinse with warm water
After the tap water is flushed, there is warm water to rinse, which means that the glue that is about to condense can be diluted with warm water.
3. Wash your eyes with soap
No matter how much you rinse, there may still be residual glue, so wash it with soap.
4. Rinse your eyes with warm water
After washing with soap, rinse with warm water.
5. Seek medical attention in a timely manner
If you are worried or your eyes are uncomfortable.
Then seek medical attention immediately.
-
Rinse quickly with plenty of water, constantly inverting the eyelids during the rinse.
502 glue is a kind of quick-setting agent, splashed into the eye should be immediately rinsed with a large amount of water, during the rinsing process to constantly reverse the eyelids, while turning the eyeball in all directions, to ensure that the 502 glue into the eye as much as possible. Even if there is a residue in the eye, because the eye secretes tears, 502 glue only forms a thin layer of translucent film on the surface of the cornea (black eyeball) after coagulation in the eye, and it has poor adhesion to the cornea, which can be removed with a sterile wet cotton swab lightly, so there is no need to panic. Because 502 glue contains a weak acid, it has a certain amount of damage to the cornea, which makes people feel eye pain and foreign body sensation (as you said: eye pain).
502 glue can be used to stick plastics, and is widely used in steel, non-ferrous metals, non-metallic ceramics, glass, wood and flexible materials such as plastic products, leather shoes, soft and hard plastics, etc. >>>More
If 502 glue enters the eye, you should seek medical attention immediately and ask a professional ophthalmologist to help remove the glue. >>>More
Wind oil essence. It can melt 502 gum, because the wind oil essence contains organic dissolution, and the specific use method is described below >>>More
The ways to remove 502 are:
1. Use banana water to drop on the glue stain, and at the same time use the old toothbrush to continuously stir and brush, wait for the glue stain to become soft and take off, then rinse with water, brush repeatedly, and brush until it is clean. >>>More
502 glue is used to glue wood.
If there is a crack in the desk at home, you can use sawdust, or instant flour foam, with 502 filling, the following steps will teach you how to use instant flour foam to repair the crack in the table: >>>More