What happens if you install win98 to go online?

The win98 system is too old, and a lot of ** can't be read, and there is no relevant software support, so it makes no practical sense to install win98.

1. Preparation:

1.Get ready for Microsoft

windows

Install the CD. 2.If possible, use the disk scanner to scan all hard disks before running the installer to check for disk faults and fix them, otherwise it will be troublesome to check for hard disk faults while the installer is running.

3.If the product key (installation serial number) is required during the installation process, record the product key (installation serial number) of the installation file on paper.

4.If possible, use a driver backup tool (e.g. Driver Wizard.

Place Windows

All drivers under 98 are backed up to the hard disk (e.g. f: drive). It is best to be able to access the Internet** The local network card driver and modem and other drivers, if you use a broadband connection, please ** and save the broadband dial-up software enternet300, you can find most of the software you want if you can access the Internet.

5.If you want to format the C drive during the installation process (it is recommended to format the C drive during the installation process), please back up the useful data of the C drive.

6.Must have an active partition in FAT or FAT32 file system format, Windows

98 can only be installed in FAT or FAT32 file system format partitions, and the partition space is recommended to be greater than 2G

2. Start the system with a CD-ROM

If you already know the method, go to the next step), put the 98 installation disc into the CD-ROM drive, reboot the system and set the CD-ROM drive as the 1st boot disk, save the settings and reboot, if there is no accident, you will see the installation interface.

3. Install Windows

After the disc is booted, if there is no accident, the boot screen will be visible.

As shown in Figure 1 below, if the disc does not self-start, you can use the 98 boot floppy disk to boot (set the floppy drive to the first boot disk). If you want to format the C drive, select item 2 to enter DOS and enter "format" under the prompt "A:"

C: "After entering, enter "Y" and press enter to open as if formatting C drive!

Here I have formatted the C drive, so select item 1 (install 98 from CD) and press enter directly, as shown in Figure 2 below, (if you don't choose item 1 after 30 seconds, it will automatically start). 4. Ending work.

1.To install a driver, see Installing --- Driver.

2.Set up an Internet connection, upgrade the system online, and set up the system.

3.Install anti-virus software, upgrade anti-virus software, install programs, etc.

To sum up, the closing work takes a lot longer than the installation. It is recommended that most users, after installing the system and programs, optimize the system for 1, and then use a system backup tool (such as ghost Chinese companion official version, etc.) to back up all C disks as 1 image file (the image file size is about 1 3 to the file size of all C disks?). In the future, if the system is damaged, it will take less than 10 minutes to restore a brand new system that is exactly the same as when it was backed up.

1) If it is a problem with the broadband itself, first directly connect to the broadband network cable for testing, and if it is a broadband problem, contact the broadband customer service to solve it.

2) If it's a problem with the router, if it can be used originally, it can't be used for the time being, my own practice is to disconnect the power of the router and plug it in, and I'll take a look. In there is a factory reset, from the new strict according to the manual settings can be used, I don't understand, it is not recommended to set it at will (this is under the premise of the correct physical connection, sometimes the router is slow or failed to find the IP address, not that the router is broken).

If it can't be solved all the time, it is recommended to call the customer service of the router, they have **** guidance, I encounter a problem that I can't solve by myself, it is very useful to consult the advice they gave, and they will give the correct advice for your settings or operations.

3) If you turn off the wireless on/off grip on and on, if it is a wireless connection with software, it is normal for the software to be difficult to use and often have problems, there is no better way, use a router. In addition, it is caused by the network card driver is not or is not suitable, and whether there is a problem with the network cable interface or network cable.

4) If it is caused by a system problem, it is recommended to restore the system or reinstall it.

Use the system that comes with the system restore method:

The system comes with the system restore: "Start" "Programs" "Accessories" "System Tools" "System also knows the original friend", click "Restore my computer to an earlier time", press Next, you will see that the date page has a dark date, that is the restore point, after you select, click the next restore (win7810 restore the system, right-click on the computer to select attributes, on the right side of the selection of system protection, system restore, follow the steps to do it, if there is a restore software, the image backup that comes with it, And the backup is made, and the system can also be restored with software and image backup).