The phone keeps vibrating and can t turn on? The phone can t be turned on, it will only vibrate and

Hello, you can first try whether you can force the boot according to the model first.

Android phones. How to deal with the failure to boot normally].

1. Press and hold the power button for more than 10 seconds to see if you can force it to turn on. If it can be turned on, please back up your important data and restore it to factory settings.

or upgrade to the latest software version.

2. If you can't force it to turn on, please check whether the phone has power, there will be a charging indication when plugged in to the power supply in the empty power state, and it may not be able to turn on immediately when it is just charged, please continue to charge it for a period of time before trying to turn it on.

Fourth, for the boot has a reaction, but does not enter the system, it is recommended to enter the recovery mode to restore the phone to the factory and try again (recovery mode entry method: press and hold the volume down + power button to turn on).

How to deal with the iPhone not booting normally].

1. Check whether the iPhone has physical damage, such as: bending deformation or water ingress and other accidents;

2. Use the original data cable and charger to charge the iPhone, check whether the iPhone is responsive, and the battery may not turn on if the battery is insufficient;

3. Force restart your iPhone;

4. If there is still no response or cannot be turned on normally after the above operations, it is recommended to go to the local Apple official or authorized after-sales service.

It could be the battery or the phone itself is malfunctioning.

It can also be solved in the following ways:

1. Press and hold [Volume Up], [Home Button], and [Power Button] at the same time in the shutdown state, and wait for the screen to light up before you can release it and enter Recovery mode.

2. After entering the recovery mode, the English selection interface will appear, select wipe data factory reset to confirm - and then select the middle line yes--delete; Are you sure.

3. Select wipe cache partition again.

4. Finally, select the first option, Reboot System Now, and restart the phone.

5. Try to turn on the phone for a period of time with a cable charge, or replace a mobile phone battery of the same model.

6. Take out the SIM card and SD card at the same time, and then try to boot it on.

7. If you still can't turn on, it may be a problem with the software or hardware of the mobile phone, it is recommended that you bring your mobile phone, purchase invoice, and repair card to the after-sales service center.

The phone has been vibrating and can't be turned on, it must be a problem with the system or a problem with the motherboard, you can force it to open the power off button at the same time, the volume key is added or subtracted, see if the phone is displayed, if there is no display, it is a problem with the motherboard, and you can only take it to the mobile phone repair shop to check.

The phone keeps vibrating and can't be turned on, it may be that your phone battery can't hold power, just change the battery. If you don't plug in the charger, pressing and holding the power on and off button will always vibrate and can't turn on, that's yours. The phone is out of battery.

If this happens to the mobile phone, it is likely that it is the mobile phone, there is a problem, or there is a problem with the system of the mobile phone, and it cannot be turned on, you can press and hold the shutdown button and the volume plus at the same time, see if the mobile phone is displayed, if there is a display, then select all the data clearly, restart the mobile phone, if there is no display is the best, take it to after-sales detection.

There are two kinds of problems with the phone not turning on: hardware or software, and system. Other questions:

If there is an external force, such as being dropped, pressed, flooded, overheated, etc., it must be a hardware problem. If you have some software, delete some system files, or can't boot after flashing, this is generally a software or system problem. Understand the problem** problem and solve it.

The phone turns on but doesn't turn on properly: This is the most common condition where the phone won't turn on. When the phone is turned on, there is a vibration and sound, but the screen is dark; After the mobile phone is turned on, it has been stuck in the logo interface and cannot enter the operation interface; There is also the fact that the mobile phone can enter the normal interface, but there is no response when you click on anything, etc.

The phone has been vibrating and can't be turned on, it is possible that the mobile phone has entered the water and there is a problem on the motherboard, go to the after-sales repair or mobile phone repair shop for repair.

Such a problem is because of the fault of the mobile phone's cable, and the display part of your mobile phone may be broken, so it is recommended that you go to the maintenance department to repair it, and there is no way to solve it by yourself.

It may be that the motherboard inside has been replaced, and in this case, there is no good way to directly replace a mobile phone, and it is not very expensive.

Go to after-sales maintenance, don't always try to turn on the machine if you can't turn it on, it may be more seriously damaged.

The phone battery catches poorly.

According to your description, there are many factors that cause the phone to not turn on, which may be related to the battery level, or it may be related to the software and hardware of the mobile phone, it is recommended that you try the following operations: 1. Charge with wire for a period of time and try to turn it on, or replace a mobile phone battery of the same model. 2. Take out the SIM card and SD card at the same time, and then try to turn on the phone.

3. If you still can't turn on, there may be a problem with the software or hardware of the mobile phone, it is recommended that you bring your mobile phone, purchase invoice, and repair card to the Samsung service center. The specific service center address.

1. Unplug the data cable.

2. Remove the battery.

3. Wait for 10-15 minutes.

4. Install the battery.

5. Generally, it can be turned on.

6. Not yet, try to use the universal charger to charge the battery.

7. Don't use a data cable to connect to the computer anymore.

Under normal circumstances, when pressing the boot button, the trigger terminal voltage of the boot button should change significantly, if there is no change, it is generally the boot key contact is poor or the boot line is broken, the components are soldered, damaged, the damage caused by the parts, we have no way to repair, we can only go to the after-sales service, they have professional tools and parts, if within the warranty period, do not need money.

Many netizens who use Huawei mobile phones may encounter that when the mobile phone is turned on one day, it can vibrate but cannot be turned on, and the following is a way to solve this problem.

1. First see if there is a prompt interface for software update on the phone, if so, first follow the above prompts to upgrade the software;

2. The second step, try to connect the mobile phone to the charger, whether the charging indicator of the mobile phone is flashing, if not, there may be a problem with the charging of the mobile phone, and you need to take the outlet for maintenance. If the charging light flashes normally, charge the phone for a while before turning it on.

3. Press and hold the power button on the Huawei phone (about 10s), if it can be restored to normal, then upgrade the phone version;

4. If it doesn't work, it is recommended to try to use the SD card to force the mobile phone to flash, the specific method of flashing the phone can be searched by yourself, please pay attention to back up the important information and files in the mobile phone before flashing.

5. Finally, the Huawei phone only vibrates and does not turn on, it is likely that the battery is not enough, for the first time to turn on, mobile phone, system upgrade and other operations, it is recommended to charge the phone for half an hour before trying to turn it on. Press and hold the power on button until the power on animation appears.

6.If there are a lot of startup items for Huawei mobile phones, it may also lead to the situation that it only vibrates but does not turn on. It is recommended to disable some unimportant software from starting automatically at boot in the settings of "Phone Manager > Auto-start at startup", so that the boot speed will be much faster.

1. First of all, you need to check whether the phone is in a state of power shutdown, you can press and hold the power button to restart, or charge the phone for a while, and then press and hold the power button.

2. Check the screen and appearance of the mobile phone to see if there is a problem with the line due to external damage, and you can go to the mobile phone repair point for repair.

3. Check whether the problem is caused by flashing the mobile phone, and it is recommended to go to the after-sales service of the mobile phone for professional inspection and maintenance.

It is possible that the system software is corrupted, and this situation can be solved by updating the system at the repair outlet;

2. Due to improper use of the mobile phone, such as dropping, bumping, water ingress, etc., resulting in short circuit, virtual soldering, etc., the internal chip of the mobile phone can not complete the power-on process and initialization, and the mobile phone is stuck in the boot interface.

3. Try the power button + volume up and down button for 15 seconds.

4. It may be caused by upgrading the system, it is recommended to wait for a while to reboot it or go to a professional mobile phone repair shop for repair.

5. Link the computer with a data cable, and try to start charging may cause the system software to be damaged, which can be solved by updating the system at the maintenance outlet;

2. Due to improper use of the mobile phone, such as dropping, bumping, water ingress, etc., resulting in short circuit, virtual soldering, etc., the internal chip of the mobile phone can not complete the power-on process and initialization, and the mobile phone is stuck in the boot interface.

3. Try the power button + volume up and down button for 15 seconds.

4. It may be caused by upgrading the system, it is recommended to wait for a while to reboot it or go to a professional mobile phone repair shop for repair.

5. Connect the computer with a data cable and try to turn on and charge.

Summary. The machine can't be turned on, and the general treatment method of vibrating all the time:

Charge the charger for a while and try to turn it on, or replace a phone battery of the same model.

Take out the SIM card and SD card at the same time and try to power on again.

If the problem persists, it may also be related to third-party software that you have installed yourself. When you see the logo icon when you reboot, press and hold the [Menu Key] (left touch sensitive button) until the word "Safe Mode" appears in the lower left corner of the screen, and then let go.

If you still can't turn on the computer after uninstalling the app, you can follow the above methods to enter the "safe mode" and back up your data (for example: contacts, text messages, **, etc.) and restore the factory settings.

What should I do if my phone doesn't turn on but it vibrates.

The machine can't be turned on, and the general treatment method of vibrating all the time: 1Charge the charger for a while and try to turn it on, or replace a phone battery of the same model.

2.Take out the SIM card and SD card at the same time and try to power on again. 3.

If the problem persists, it may also be related to third-party software that you have installed yourself. When you see the logo icon when you reboot, press and hold the [Menu Key] (left touch sensing button) until the words "Balance Security Mode" appear in the lower left corner of the screen, and then let go. 4.

If you still can't turn on the computer after uninstalling the app, you can follow the above methods to enter the "safe mode" and back up your data (for example: contacts, text messages, **, etc.) and restore the factory settings.

I hope my answers help you.

Okay, give it a try.

Good kiss.

If your phone won't turn on but there is a quark, it could be one of the following reasons:1Low battery:

Try connecting your phone to the charger and charging it, wait for a while before trying to turn it on. 2.System crash:

Try to press and hold the power button and volume down button of the phone wheel at the same time to enter the recovery mode, and then select the "Wipe Cache Partition" and "Wipe Data Factory Reset" options to clear the phone cache and restore factory settings. 3.Software Issues:

If you've recently installed a new app or updated your system, it can cause software issues. Try to enter safe mode, press and hold the power key, then long press the "Power off" option, select "Enter Safe Mode", in safe mode, you can uninstall recently installed apps or updates. 4.

Hardware issues: If none of the above methods can solve the problem, it may be a hardware issue. It is recommended that you take your phone to a professional repair center for inspection and repair.

Summary. <> pro

Hello, I'm glad to answer for you. If your phone won't turn on, but it vibrates, you can try the following methods:1

Charging: Connect your phone to the charger and wait a while before trying to turn it on. Sometimes the battery of the phone is too low and it will not turn on, but this problem can be solved after charging.

2.Force restart: Press and hold your phone's power key and volume down key (or volume plus key) at the same time until your phone vibrates and restarts.

3.Remove the battery: If your phone has a removable battery, try removing the battery, waiting a while before reinstalling the battery and trying to turn it on.

4.Factory reset: If none of the above methods can solve the problem, you can try a factory reset.

But please note that a factory reset will erase all data on your phone, including **, contacts, text messages, etc., so please back up important data in advance. If none of the above methods can solve the problem, it is recommended to contact the mobile phone manufacturer or repair center for repair.

What should I do if my phone doesn't turn on but it vibrates.

<> pro

Hello, I'm glad to answer for you. If your phone won't turn on, but it vibrates, you can try the following methods:1

Charging: Connect your phone to the charger and wait a while before trying to turn it on. Sometimes the battery of the phone is too low and it will not turn on, but this problem can be solved after charging.

2.Force restart: Press and hold the phone's power button and volume down button (or volume plus key) at the same time until the phone shakes and restarts.

3.Remove the battery: If your phone has a removable battery, you can try to remove the battery, wait for a while before reinstalling the battery and try to turn it on.

4.Factory reset: If none of the above methods can solve the problem, you can try to restore the grip to factory settings.

But please note that a factory reset will erase all data on your phone, including **, contacts, text messages, etc., so please back up important data in advance. If none of the above methods can solve the problem, it is recommended to contact the mobile phone manufacturer or repair center for repair.

The phone can't be turned on, and the charger is plugged in and only vibrates once and it doesn't respond, what's going on?

Kiss <>

If the mobile phone can't cover the machine, the charger is plugged in and only vibrates once and it doesn't respond, which may be caused by the following reasons:1The battery is too low to turn on.

Try charging your phone for a while before trying to turn it on. 2.There is a problem with the charger or charging cable and it is not charging properly.

Try replacing the charger or charging cable, or using a different power connector. 3.Hardware failure of the phone, such as aging battery, damaged motherboard, etc.

Need to send in for repair or replacement parts. It is recommended to try to replace the charger or charging cable first, and if the problem persists, you can consider contacting the mobile phone manufacturer or professional repairers for repair.