How can an iPhone connect to wifi

Apple wifi can't connect to the solution 1: join the network.

Confirm that Wi-Fi is enabled and that you're connected to a Wi-Fi network. Press "Settings" > "Wi-Fi". If Wi-Fi is off, tap the On Off icon to turn it on.

Choose a network. The available Wi-Fi networks are shown below. Find and tap the Wi-Fi network you want to join.

Apple WiFi can't be connected Solution 2: Verify the password.

Some Wi-Fi networks require a password to join. A password-protected Wi-Fi network has a padlock icon. If you receive an error when joining a password-protected Wi-Fi network:

1.Type your password slowly to verify that you are entering the correct password.

2.If you can't tap Join, the password is too short for that Wi-Fi network.

3.If you don't know the password, contact your Wi-Fi administrator.

Apple wifi can't be connectedSolution 3: Check the connection.

In the status bar or Wi-Fi menu, check the signal strength of your Wi-Fi network. The higher the number of signal grids, the stronger the signal. If you only have one signal, or you still can't find your Wi-Fi network:

1.Please move closer to a Wi-Fi access point or router.

2.Avoid potential sources of interference that could affect your Wi-Fi signal, such as concrete walls or microwave ovens.

3.Next, use Safari to open a webpage to check the connection. When using some public Wi-Fi networks, Safari

A web page may be displayed that allows you to log in to use the Services. Check this webpage for more information about signing in or subscribing to Wi-Fi service at that location.

Apple wifi can't be connected to the solution 4: check the wireless LAN.

1.If you have a strong Wi-Fi signal but still can't access the Internet, verify that you're using a Wi-Fi network.

2.Confirm that you're connected to the correct Wi-Fi network and not to another nearby Wi-Fi network.

3.Check the cable connection of your Wi-Fi access point or router.

Apple wifi can't connect solution 5: Reset network settings.

To reset network settings, tap Settings > General, then scroll down and tap Reset > Reset Network Settings. After your device restarts, try to find and join the Wi-Fi network again.

Apple wifi can't connect solution 6: If you still have wireless LAN problems, please try the following options:

1.Check out the following additional tips for using Wi-Fi.

2.Use iTunes to update your iPhone to the latest software.

4.Get tips from other iPhone users in the iPhone forums.

Hello, open Settings, then turn on the wireless LAN, then you can see the wireless signals around, and then tap the wifi signal that knows the password Enter the password to connect.

How to connect the iPhone to wifi?

The mobile phone login wifi setting method is as follows:Tools: iPhone, browser.

2. Enter the corresponding login password, that is, the login password you created (no password is required for the first login), and enter the password to log in. Note: The IP address of this song is composed of pure numbers, without any letters, please do not enter the wrong and cannot log in.

3. We come to the router settings interface and find [Wireless Settings] at the top.

4. Click [Wireless Security Settings] and then you can see the wireless wifi password setting interface on the right, enter the password that needs to be set, and click Save.

<> click Enter a description.

2. Turn on the wireless LAN, and after searching for the available wifi wireless network, click the name of the wifi you need to connect to. If the wifi has a password, you need to enter the wifi password for security verification to connect to the Internet, as shown in the figure.

3. If the password is entered correctly, you can successfully connect to the wifi. After the connection is successful, we can open the Sairi browser, and then enter a**, such as access to the computer Pepsi mobile version:, to see if it can be accessed normally, if it is successfully opened, it means that the iphone6s can already successfully WiFi free Internet access, as shown in the figure.

<> click Enter a description.

How to connect the iPhone to wifi?

Open the phone's settings - wireless LAN, find the wifi network that needs to be connected, click, if you need to choose the encryption method, select WPA1 WPA2, and then enter the wifi network password.

Open the settings on your phone and click on the link function to turn on the wifi as required, just go and try it.

Just like a normal mobile phone, enter the password and enter the wifi password to connect to the wifi.

Take a look at the instructions and settings of the Apple mobile phone to know how to use the Wifl on the Apple mobile phone