-
The simple way to deal with this is sandpaper sanding and re-varnishing.
How to maintain furniture.
When cleaning and maintaining furniture, it is important to make sure that the rag used is clean. When cleaning or dusting off, be sure to turn it over or replace it with a clean rag before using it. Don't be lazy and reuse the soiled side over and over again, as this will only cause dirt to rub against the surface of the furniture repeatedly, which in turn will damage the glossy surface of the furniture.
The humidity in the room should be protected within the normal value, when using the humidifier, only in the dry season with low humidity, but it should be kept away from furniture spray, moisture will make the wood rot, metal fittings will rust, the adhesive part is easy to open the glue, and the chrome plating original will produce decoating, etc.
Pure white paint furniture, when yellowing occurs for a long time, you can use a pure white spun knitted cotton cloth dipped in a little toothpaste to wipe gently, and then use a damp cloth to remove the toothpaste residue, and then wipe dry with a dry cloth, the yellowing phenomenon can be greatly improved. Painted furniture, often because of the boiling water cup, hot soup bowl, after the appearance of white gray burns, affecting the appearance, can be dipped in a muslin cloth with a little strong tea or toilet water, as well as a little alcohol, gently wiped, can be removed, and then wiped dry with a cloth.
Pure white paint furniture, when yellowing occurs for a long time, you can use a pure white spun knitted cotton cloth dipped in a little toothpaste to wipe gently, and then use a damp cloth to remove the toothpaste residue, and then wipe dry with a dry cloth, the yellowing phenomenon can be greatly improved. Painted furniture, often because of the boiling water cup, hot soup bowl, after the appearance of white gray burns, affecting the appearance, can be dipped in a muslin cloth with a little strong tea or toilet water, as well as a little alcohol, gently wiped, can be removed, and then wiped dry with a cloth.
-
Teach you a good way, go to the stationery store to buy a bottle of correction liquid, and 502 glue, first carefully apply 502 glue where the paint is off, and after drying, apply the correction liquid, you can't see it if you don't pay attention
-
It depends on what color you are, if it's red, use red shoe polish. That's how I use it
-
How to repair the furniture paint off the pro! Hello, I am glad to answer for you<> the repair method of pro-furniture paint loss: solid wood furniture paint removal remedy If there is a small part of solid wood furniture paint loss oak filial piety, then you can use a little nail polish to remedy the paint in the paint loss part.
But if you drop a lot, then you can use old books or waste newspapers, alum, and frosted paper to cut Liang Wei's manuscript into pieces, and then add the waste crumbs to the alum and cook it into a paste, and then wait for the paste to dry and harden and apply it to the part of the paint that has fallen off for remediation. The second method of remedying the paint off of solid wood furniture is to directly fill the damaged parts of the furniture with latex and wood chips. After the paste is dry and hard, use sanding paper to smooth it, and after smoothing it, then apply the same pigment as the paint color to the part of the paint that has fallen off, and then wait for the paint to dry, and then apply it again with varnish, which can also play a role in remedy.
Hope mine can help you <>
Do you have any other questions?
-
Now more and more decoration owners will choose custom furniture, it is recommended that the landlord choose custom furniture, custom furniture is more and more favored by consumers, because custom home has the following characteristics: (1) according to the size of the house and the living situation of the family. This can not only save living space, but also can be done according to the specific requirements of storage, and the height of the cabinet can even be roofed, so as to store more items and make its use function to the extreme.
For families with large rooms and plenty of storage space, there are more options. (2) Home customization is conducive to breaking through the conventional limitations of products and bringing forth the new. Furniture customization consumers can choose to choose different or the same style of furniture according to their own preferences, and adjust the material and specifications of the product according to the requirements of function, sensory and quality
-
1. If the paint is only lost in a small area, apply the nail polish to the paint removal part.
2. If the paint loss range is relatively large, you can cut some old newspapers, add alum to boil paste, wait until it is dry and apply it to the paint removal part, or mix it with latex paint and sawdust, fill it into the damaged part, and wait until it is dry and polish it with sandpaper, and then paint it with the same color paint.
How to maintain furniture.
1. For furniture, cracks will occur mainly because of excessive changes in humidity and temperature, generally speaking, the humidity of the living room is controlled at about 50% for maintenance, and the wood has hygroscopicity, and the use of home and field exacerbators changes due to changes in the environment, so it is recommended to put it in a place where it is cool, ventilated, and the temperature and light are relatively moderate.
2. If the wooden furniture is leaned against the damp wall, it is easy to absorb moisture and expand, resulting in cracking and mildew, because the home must be dehumidified frequently, generally half a month to a month, and it should be noted when using the humidifier during the heating period, the humidifier and the wooden furniture should be kept at a distance, and the humidity of the room should not be too high.
3. It is also very important for the placement of furniture, be sure to avoid strong light, and do not approach the furniture when using heating equipment in winter, otherwise it is easy to crack and fade, and at the same time pay attention to keep the ventilation and dryness in the house, and do not let the furniture stay in a humid environment for a long time, otherwise it is easy to mildew.
-
1。If the furniture paint film is burned by cigarette butts or unextinguished fires, etc., and the wood under the unburned paint film can be used with a small piece of fine-grained hard cloth, wrap a chopstick head, gently wipe the burn marks, and then, apply a thin layer of wax liquid, and the scorch marks can be removed.
2。If the furniture is not alert to scratches, but does not touch the wood under the paint film, you can use a cotton cloth dipped in a little molten wax and apply it to the paint film abrasion to surround the scars.
3。The appearance of wooden furniture directly arranges the utensils for hot water, which will leave white round scars on the wooden furniture. As usual, it will be removed as long as it is wiped in real time.
However, if the burn marks are too deep, you need to gently rub them on it with ordinary iodine wine, or apply some petroleum jelly to the burns, and after two days, wipe them with a soft cloth to remove the burns.
4。You can also use a soft cloth dipped in alcohol, perfume or fire oil, wipe vigorously, the white scald marks will also be removed, after removing the scalds, you should wipe it with a soft cloth dipped in clean water, and then apply a layer of light wax.
-
First you go buy the same color! Mix with the appropriate gasoline. Stir the paint to combine. Apply ......Just dry it.
-
How to prescribe the right medicine for 10 conditions in paint 1, the right number: blackened area.
Sitting: Scrape off marks, grind off nodules, dry and repaint.
2. Pair: paint droplets and overflow.
Sitting: After the paint is allowed to dry, sandpaper, dusted and repainted.
3. Check number: wrinkles.
Sitting: Applying the second coat of paint before the first coat is dry will cause wrinkles, which should be scraped off and repainted.
4. Pair: gravel.
Seating: If the grit is wrapped in dry paint, gently grind it with sandpaper, sweep the paint, and wipe it clean after drying.
5. Pair: scarring.
Seating: Remove the original paint (if there are gaps, fill them first), lay the foundation, apply the primer and then apply the paint.
6. Pair: uneven coating.
Seating: If the primer is transparent, add a layer of paint.
7. Check number: flake peeling.
Seating: If the surface is not treated, the original paint layer should be scraped off, and the surface should be repainted.
8. Check number: pigmentation.
Seating: Apply the painted surface with an aluminum base and repaint.
9. Check number: crack.
Seating: If the two layers of paint are incompatible, cracks will occur, scrape off the original paint and recoat.
10. Check number: black dot.
-
If our furniture is very expensive, then if you want to touch up the paint yourself after the paint is removed, then you have to go through a certain formal process. The first is the choice of paint, furniture paint is generally divided into oil-based paint and water-based paint, in general, oil-based paint is colored, water-based paint is to ensure the original color of solid wood furniture, that is to say, water-based wood paint is transparent, then our furniture paint, I think it should be oil-based paint, because water-based paint is not easy to find, so we just need to selectively buy according to the color of the paint. After buying the paint, it is time to touch up the paint process, the paint for the furniture is not as simple as we imagined, the following is the regular paint repair process I prepared for you:
1. Polishing first
To repaint furniture, just like repainting a car, we first have to carry out regular polishing, that is to say, all the places around the furniture should be polished, so that it becomes as smooth as possible, so that it can be convenient for us to paint. When polishing, we must pay attention to if our wooden furniture is pure solid wood, then we should polish along the direction of the texture of the solid wood, first up and then down, first outside and then inside, and the sandpaper should not be too big or too small, as long as the size of our hands is appropriate, in addition, if the edges and corners of the furniture are painted, we should be more careful when polishing.
2. Paint mixing
When the polishing is relatively smooth, we can stop, and then we will enter the second process, that is, the paint mixing, the paint is very particular, we must pay attention to the need to repair the paint, the density of the home material, if the pure solid wood furniture, and the density is relatively high, then we should adjust the paint to be denser, if the density is relatively low, then the paint should be adjusted a little thinner, This is mainly to maintain the degree of overlap between the paint surface and the wood itself through density, if the adjustment is not in place, then after brushing, it is easy to be seen, which will affect the overall appearance of the home.
3. Paint
Finally, it is the most important process of painting, when painting, I recommend that you use some relatively small brushes, because small brushes are relatively easy to control, and for the processing of details, small brushes can be done very perfectly, but small brushes are particularly delayed, it is recommended that you choose to have a lot of free time to do. When painting, you must pay attention to the speed of painting, the speed can not be too fast, not too slow, be sure to maintain a uniform speed of painting, because too fast will lead to uneven paint brushing, and too slow will definitely make some places paint accumulation.
-
See what kind of furniture you are MDF? Solid wood?
-
Solid wood furniture is not as strong as we imagined, how you use and maintain it unreasonably, there will be all kinds of problems. In fact, after the four seasons of the perennial change, wood furniture is easy to expand and contract, but the thermal expansion and contraction is easy to crack the original smooth paint surface. There is also the unreasonable use of us in life, and it is easy to cause solid wood furniture to fall off the paint if we often bump and knock it out of a big way.
Remedies for paint loss of solid wood furniture 1].
If there is a small amount of paint loss on solid wood furniture, then you can remedy it with a little nail polish in the part where the paint has peeled. But if you drop a lot, then you can use old books or waste newspapers, alum, and frost paper, cut them up, and then add the scraps to the alum and cook them into a paste, and then wait for the paste to dry and harden and apply it to the part where the paint has fallen to remedy.
Remedies for paint loss of solid wood furniture II].
Another method is to fill the damaged part of the furniture directly with latex with wood chips. Wait until the paste is dry and hard, polish it with sandpaper, and then apply the same pigment as the paint color to the part that has fallen off, and then wait for the paint to dry, and then apply it again with varnish, which can also play a remedy role.
Solid wood furniture paint selection].
Generally, it is very good for solid wood furniture to use natural teak oil extracted from teak, which has a great protective effect on solid wood furniture. And teak will not form lacquer, but also enhance the hardness of the wood surface, not easy to warp and fall off, teak oil is also relatively environmentally friendly and healthy, will not cover the natural texture of the wood itself, but also make solid wood furniture more shiny.
Solid wood furniture maintenance].
We should also pay attention to the reasonable use and maintenance of solid wood furniture in life. The placement of solid wood furniture should be paid attention to flattening, and maintain a moderate indoor temperature for a long time, not directly in contact with the direct sunlight, and hot items should not be in close contact with solid wood furniture. And carry out regular cleaning and waxing, and handle it gently when handling to avoid damaging the furniture.
-
The paint will fall off with a slight touch, which means that the paint is not good, or the quality of the paint is not good.
1) Carefully wash the surface of the substrate to be sprayed and dry the surface with a clean cloth. >>>More
The suitable sowing depth of wheat is generally considered to be 3-5cm, and more than 5cm is defined as sowing too deep. >>>More
If you are yellowed, it means that you did not clean the soapy water when you washed your shoes, and you should pay attention to it in the future. There is too much sun exposure and oxidation I recommend several remedies to you 1Fill a basin of warm water, add 2 spoons of laundry detergent, and a bottle of bleach, the amount of water is not above the highest point of the shoes as the standard, if you have other colors on your white shoes, add a spoonful of salt, so that other colors will not be bleached, pure white shoes do not add salt. >>>More
The tenon hole is widened, and there are two ways to remedy it. One is to make a tenon according to the existing tenon hole; The second is to make a filler according to the size of the existing mortise and tenon hole, and the mortise and tenon hole will be filled with woodworking glue, and the tenon hole will be opened in the position or the original position after the glue is dried.
This situation is mainly caused by the loosening of the buckle in the middle of the two layers of glass. Due to the simple operation method of vacuum glass installation, this situation is generally related to the factory quality of the glass. If it is still under warranty, it is recommended that you contact the manufacturer directly for replacement. >>>More