-
IPN8710 interpenetrating network anticorrosive coating made of polyurethane resin.
and modified epoxy resin, asphalt, anti-rust pigments and additives and other grinding and fine filtering of two-component coatings.
IPN8710 is suitable for underground pipelines, including underground and flooded structures buried in various soil conditions, dock steel piles, etc.
IPN8710 Part Construction Parameters:
1. Applicable period: 8 hours.
2. Thinner.
And dosage: special diluent, 5.
3. Coating method: brushing, rolling or spraying.
4. Painting interval: minimum 4 hours, maximum 3 days.
5. Paint film thickness: wet film: 200 m, dry film: 120 m.
6. Theoretical dosage: 250g m2.
7. Surface treatment.
Remove oil, dust, welding slag, oxidized into loose rust on the surface of anticorrosive parts, and keep the surface dry and stain-free.
8. Supporting primer: IPN8710 anticorrosive primer, IPN8710 4 high-build anticorrosive primer, etc.
-
1. Composition: IPN8710 anticorrosive coating is a two-component, high-solid coating with epoxy resin as the main agent. Divided into primer and topcoat. Part A is composed of epoxy resin, pigments, additives and additives. Part B is a curing agent formulated with modified amines.
2. Characteristics and application fields:
Good durability, the paint film cured by epoxy resin is tough and water-resistant, and has no pollution to water. Strong adhesion, good adhesion between the paint film and the paint film. Excellent anti-rust and water resistance, and the use of excellent anti-rust raw materials can ensure its anti-rust performance.
It has good mechanical strength, tough paint film, and has abrasion and impact resistance. The solids content is high and the coating film is thick. Solidify at room temperature for film formation.
There is no need for large baking equipment.
It is widely used in the interior wall coating of water supply equipment such as drinking tanks, water pipes, water tanks, water towers, etc., and in the cargo hold of sugar and grain. It can also be used as an inner wall coating for swimming pools, power plant cooling towers, and metal and concrete filled with fuel oil and gasoline.
3. Technical indicators: (Note: chemical resistance is the bottom, and the surface is the composite layer).
Project. Index.
Project. Index.
Appearance and color of the paint film.
White, the paint film is flat.
Impact resistance kg cm.
Viscosity (Tu-4 viscometer) seconds.
Adhesion (circle-marking) grade.
Flexibility (mm).
Solid (H) resistant to 3% saline.
No change for 72 hours.
Resistant to 10% acids, alkalis and salts.
No change for 72 hours.
Oil-resistant. No change for 72 hours.
Fourth, construction and storage:
1) Before painting, the dust, oil, oxide scale, etc. on the surface of the object must be cleaned. Reach SA class to guarantee the quality of the brush. It is strictly forbidden to bring in water during construction.
2) The construction ratio method is as follows: open the mouth of component A, add component B to component A, and stir it evenly. Mature for 30 minutes, then you can coat.
3) This material is required to be used with the mixture, and the proportioned paint must be used up within eight hours. Unfinished materials should be sealed and stored. Construction should be stopped on rainy days or when the relative temperature is greater than 75%. For parts with severe corrosive media, it is recommended to apply multiple coatings.
4) The product should be stored in a cool and dry place, prevent direct sunlight, isolate the fire source, and keep away from the heat source. The storage period is 12 months, and the technical indicators should be inspected after the expiration, and if the index requirements are met, they can continue to be used.
-
IPN8710 anticorrosive coating is a commonly used anticorrosive coating for water supply pipelines with chemical inertness, acid, alkali and salt corrosion resistance, dense coating structure, good waterproof permeability, strong adhesion and toughness and plumpness. It can be divided into two types: IPN8710-1 anticorrosive coating and IPN8710-3 anticorrosive coating.
IPN8710-1 anticorrosive coating has the characteristics of dense coating film structure, excellent acid, alkali, salt, anti-rust performance and strong adhesion, so IPN8710-1 anticorrosive coating is generally applied to the inner layer of water supply pipelines, that is, primer.
The IPN8710-3 anticorrosive coating has the characteristics of non-toxic and anti-microbial subcontracting, so this IPN8710 anticorrosive coating is often used in the topcoat of water supply pipelines.
-
How much is 1 barrel, how many squares can 1 barrel make.
-
Summary. Yes, pro, can 8710 anticorrosive paint be used as wall paint?
IPN8710 is a two-component coating made of polyurethane resin and modified epoxy resin, asphalt, antirust pigments and additives. IPN8710 is suitable for underground pipelines, including underground and flooded structures buried in several ridges of various soil strips, wharf steel piles, etc. IPN8710 Part Construction Parameters:
1. Applicable period: 8 hours. 2. Diluent and dosage:
Diluent, 5. 3. Coating method: brushing, rolling or spraying.
4. Painting interval: minimum 4 hours, maximum 3 days. 5. Thickness of paint film:
Wet film: 200 m Dry film: 120 Theoretical dosage:
250g surface treatment: remove oil, dust, welding slag, oxidized into loose rust on the surface of anticorrosive parts, and keep the surface dry and free of cherry blossoms. 8. Matching primer:
IPN8710 anticorrosive primer, IPN8710 4 high-build anticorrosive primer, etc.
Extended information: 8710 anticorrosive coating precautions: 1. After the coating is prepared, it is cured for 20 minutes in summer and 1 5 2 hours in winter, and it is generally used up within 8 hours.
Otherwise, the sticky number of sails will be thickened, and it will not be easy to construct, or even scrapped. 2. After the paint is stored for too long, it will precipitate slightly, and it should be stirred before use. 3. The primer can be coated after the surface is dry, and the interval at room temperature should not exceed two days, otherwise it will affect the interlayer bonding, and the time gap between the coatings of each layer of paint is also better than the surface drying.
4. The product should be stored in a cool, ventilated and dry place in a shaded car, isolated from the fire source, and the potatoes should be kept away from the heat source. 5. This product is a high-build coating, which can be thick-coated to avoid sagging, and can be brushed without adding thinner after opening the barrel.
-
The role of anticorrosive paint is very large, which can make the life of the use longer, but the standard and the aspects that need to be paid attention to should be particularly cautious about the anticorrosive paint, and the pickpocketing is clever to avoid unnecessary trouble. So what are the national standards for 8710 anticorrosive paint, and what should be paid attention to in the use of anticorrosive paint, do you understand? Now let's take a look.
1. What are the national standards for Douchun 8710 anticorrosive paint?
1. Before brushing anticorrosive paint, the ground material needs to be dusted and degreased; 2. When using anticorrosive paint, it should be mixed with the curing agent in a certain proportion and placed for about 10 minutes for construction; 3. The environment of anticorrosive paint construction needs to be controlled at more than 15 degrees; 4. Anticorrosive paint should be used within the shelf life, and should not be used beyond the shelf life.
Second, what should be paid attention to in the use of anticorrosive paint.
1. Before painting anticorrosive paint, you need to confirm whether the anticorrosive paint you choose will cause damage to the human body, and you need to take necessary protective measures during construction. Furthermore, the construction of anticorrosive paint cannot be mixed with other items, otherwise it is very likely to lead to other accidents and increase unnecessary trouble.
2. For the items ready for the construction of anticorrosive paint, it is necessary to ensure that there will be no excess impurities and dust on the surface, as long as the construction requirements are met, otherwise the painting effect will be greatly reduced, so that the anticorrosive effect can not be played to the best state, so special attention should be paid to the cleaning process.
3. During construction, construction management should do a good job of strict protection. The quality of anticorrosive paint can not be problematic, to avoid the reduction of the painting effect, so the usual preservation must be reasonable. Then there is the construction process, the attitude of the construction personnel is also particularly important, and no corners must be cut, otherwise the role of anticorrosive paint will be reduced.
What are the national standards for 8710 anticorrosive paint, and what should be paid attention to in the use of anticorrosive paint, which is introduced here, do you understand? The use of anticorrosive paint is recognized by most people, but it is necessary to pay attention to the construction process, otherwise it will reduce the overall painting effect.
-
Summary. Pro, 8710 Anticorrosive Paint Removal Method:
Pro, 8710 Anticorrosive Paint Removal Method:
1. Olive oil: If you have olive oil at home, you can apply some paint on your hands and gently rub it a few times, soak it for a while, and wash it with soap after a few minutes.
Method 2: Toilet water: If you can't find olive oil, use toilet water to apply it to the place where the paint is stained. After a while, just wash it with soap.
Method 3, peanut oil & salad oil: If there are no of the above two things, then use peanut oil or take the salad letter to grind the oil, rub it in the position of the paint and add some dish soap to rub it, and finally rub it twice with a rag, and the paint will always be removed.
Method 4: Banana oil: If the smell is relatively dusty, you can use banana oil to wash it on the position stained with paint. There will be no odor with banana oil. Or go directly to the paint shop to buy some turpentine for cleaning. Pailimb Mausoleum.
Method 5: Gasoline touch: If the paint is dyed severely, you can also use gasoline to clean it. First of all, apply a little oil to the place where the paint is stained, and then use soap to clean it.
-
IPN8710 drinking tank coating is a two-component coating made of polyurethane resin and modified epoxy resin, asphalt, anti-rust pigments and additives.
IPN8710 Drinking Water Standard Anticorrosive Coating Characteristics:
1.Non-toxic and environmentally friendly:
Epoxy drinking tank paint is produced with high-quality non-toxic raw materials, and the coating is non-toxic, which is an environmentally clever or friendly coating.
2.Drinking water levels.
The product meets the drinking water hygiene standards, is a food-grade coating, and has no harm to the human body.
3.Strong water resistance.
The paint film has strong water resistance, water penetration resistance, and the coating is prepared with caution without filial piety bubbles and does not fall off.
4.Good oil resistance.
Resistant to all kinds of low molecular weight oils and chemicals, such as edible oil, vegetable oil, gasoline, diesel, etc.
It is recommended to use high-pressure airless spraying, each coating film thickness of 100 microns is appropriate, spraying 3 coatings, reaching 300 microns, pay attention to the coating interval of each paint, to avoid paint sagging.
-
Coatings are indispensable materials in our decoration industry, among which anticorrosive coatings are the most recognized one of the coatings, anticorrosive coatings can be mainly divided into anticorrosive coatings and heavy anticorrosive coatings and so on. Anticorrosive coatings mainly play a very good anti-corrosion role on metals. There are many types of anticorrosive coatings, such as the most common inorganic zinc silicate workshop primer, inorganic zinc silicate workshop primer (high zinc), water-based inorganic zinc-rich primer, water-based inorganic zinc-rich primer (high zinc), ethylene phosphating primer, etc., so let's talk about the knowledge of anti-corrosion coatings.
Anticorrosive coatings**
Anticorrosive coatings, generally divided into conventional anticorrosive coatings and heavy anticorrosive coatings, are indispensable coatings in paint coatings. Conventional anticorrosive coatings are used to prevent corrosion of metals and protect the life of non-ferrous metals under general conditions; Heavy anticorrosive coatings refer to a type of anticorrosive coatings that can be applied in relatively harsh corrosive environments and can achieve a longer protection period than conventional anticorrosive coatings.
Manufacturer of anticorrosive coatings
1. Beijing Forbidden City Paint Industry Co., Ltd. is a professional manufacturer specializing in the production of various types of heavy anticorrosive coatings and powder coatings. The company was founded in 2005, covers an area of more than 20,000 square meters, the company has been the development of the company has been the pursuit of technological innovation, believe that the user is the driving force of the product, adhere to the "integrity for the building, quality for the beam" product concept, the company brings together the industry's high-end technical personnel.
2, Tianjin Chenguang chemical paint **** is Yinjin domestic professional chlorinated rubber paint, acrylic paint, acrylic polyurethane paint manufacturer, the company was founded in 2006, the production and development of paint brand for "Chenxi brand", the company specializes in the production of various types of acrylic polyurethane paint, acrylic primer, acrylic hammer paint, chlorinated rubber anticorrosive paint, acrylic topcoat. The company has been committed to the research of "Chenxi brand" series of high-end industrial paints for more than ten years, welcome to buy.
3. Tianjin Shuangshi Paint **** is a large-scale chemical enterprise dedicated to professional coating research and development, production and production, the company was founded in 2013, located in Huaxiang Industrial Zone, Wuqing District, Tianjin, with a registered capital of 12 million yuan, covering an area of 16,000 square meters, is a modern large-scale chemical enterprise with an annual productivity of 100,000 tons of professional coatings.
The above is what I told you about the knowledge of anticorrosive coatings, I think you have a deeper and deeper understanding of anticorrosive materials after reading our sharing content. The performance characteristics of anti-corrosion coating are also very many, such as it has very good anti-corrosion performance, very good adhesion ability, very long service life, construction performance is also very good, in addition to its environmental performance is also very good. So now there are a lot of industries that are using anti-corrosion material knowledge.
For example, emerging marine engineering, large industrial enterprises, and so on.
You can get it for free
Zhisheng Weihua special functional flue gas anticorrosive coating] coating has been successfully applied, the coating has high temperature flue gas resistance, chimney flue condensate corrosion effect, high temperature resistance, high hardness and wear resistance, acid and alkali resistance, anti-tar adhesion, good expansion coefficient, and can be used for more than 10 years. 1. ZS-1041 flue gas anticorrosive coating: high temperature resistance: >>>More
Zhisheng Weihua special functional flue gas anticorrosive coating] coating has been successfully applied, the coating has high temperature flue gas resistance, chimney flue condensate corrosion effect, high temperature resistance, high hardness and wear resistance, acid and alkali resistance, anti-tar adhesion, good expansion coefficient, and can be used for more than 10 years. 1. ZS-1041 flue gas anticorrosive coating: high temperature resistance: >>>More
Zhisheng Weihua special functional flue gas anticorrosive coating] coating has been successfully applied, the coating has high temperature flue gas resistance, chimney flue condensate corrosion effect, high temperature resistance, high hardness and wear resistance, acid and alkali resistance, anti-tar adhesion, good expansion coefficient, and can be used for more than 10 years. 1. ZS-1041 flue gas anticorrosive coating: high temperature resistance: >>>More
According to the performance of the product, the product ** also has a number of differences. Founded in December 1998 and located in Shanghai, Shanghai Xili Carbon is committed to the production and research and development of graphite products, in line with the business philosophy of "quality first, integrity-based", adhering to the scientific concept of development, always focusing on providing customers with high-tech content of various high-quality graphite products.
First, in the field of mild and moderate anti-corrosion, such as the field of anti-corrosion coatings for buildings and steel structures, it is still difficult to develop in the field of heavy anti-corrosion due to technical conditions; The second is the field of furniture coatings (wood coatings), at present, the water-based rate of furniture coatings in China is only about 5%, but water-based coating products show rapid technological development and rapid growth in downstream market demand, and the later development space is huge; The third is the field of automotive coatings, at present, in China's automotive coatings, the primer has been all waterborne, the water-based rate of topcoat has reached about 50%, although the water-based rate of automotive repair coatings is not high, but by a number of key areas represented by Beijing for the requirements of environmental governance of the auto repair industry, and key enterprises have water-based automotive repair coatings technical reserves, the field will also show a rapid growth trend. In addition, the development of water-based container coatings and construction machinery coatings also has great potential.