How to get a border with a magic hand of light and shadow, how to add a custom border to a photo wit

Do you add borders or make your own?

If you add a border, there are a lot of borders under the tool "menu". 、If it's a thing to make, you're going to use ps()。。。 It's more troublesome.

I want to say upstairs in the ps, white represents transparency, black is opaque, and other colors are translucent (only black, white, gray in the case of masks) three colors...

After the frame is made, you can save the format of png, tif, pct, gif, psd, etc.。。 Then select "Multi-Picture Border" (shortcut key Ctrl+Alt+M) on the "Menu" side of the tool, and then you can have the "+" sign and "-" sign below the frame. Then add the frames you need...

If you're still in trouble.

The easiest way (you will use ps, in the case of you, you go to the Internet to find a (picture frame, brush) There are a lot of patterns in it, I do design, and there are a lot of them in my computer. You adjust the size and click on the ** you want. ）

There is an official production software for multi-picture borders and pattern borders. My personal practice of tearing the edge of the border is to make their own png or jpg**, white represents transparency, black opaque, other colors are translucent, you can also adjust the transparency in ps when you do**, the transparency is the same after the border is generated (white transparent, black opaque is the case when using the default setting when using the border, experience it yourself).

Start the light and shadow, open a **, and then you can use the border tool!

Summary. Click "Open" in the computer version of Light and Shadow Magic, and open a ** you want to deal with in the computer.

How to use the Light and Shadow Magic Hand to add a custom border to **.

Click "Open" in the computer version of Light and Shadow Magic, and open a ** you want to deal with in the computer.

**After opening, select "Custom Expanding" in the border

33.Set the margins of the left and right borders above and below the border.

Find your favorite **Click "Open"66Finally, adjust the shadow of the border, and then click OK to make the border.

How did such a border come about? The main thing is the two white wireframes inside.

Set the margins to adjust the color.

The two white wireframes inside don't know how to do it.

Was it implemented by adding boxes a few times?

That's right. Oh! Thank you.

Light and Shadow Magic Hand is an image processing software that is really useful for people who need images. Let me briefly talk about how to use the Light and Shadow Magic Hand.

02 Then click on the upper left corner to open a ** after entering, as shown below.

03 Click Crop to make a simple crop of **, or you can crop it according to your needs!

04 Click on the brush in the navigation bar above, where you can add text, lines, curves, arrows, etc., which is very convenient.

05 It is worth mentioning that the digital darkroom in the upper right corner can be set up with a variety of photo effects, such as mosaic and so on. Also**add watermark, add text description, **contrast adjustment and wait for it is very easy to get started! When the operation is complete, click Save As and you're done!

It's also easy for novice users to get started, so you might as well give it a try!

Double-click the icon of the installed Light and Shadow Magic Hand app on your desktop, as shown in the image below.

After opening the software, click on the Open button on the navigation as shown in the image below.

Select the icon you want to add a border to from your computer and click Open, as shown in the image below.

Once opened, tap the border icon on the navigation as shown in the image below.

In the pop-up drop-down menu, select the border mode you want, here I selected the pattern border, as shown in the figure below.

After opening the Pattern Border Mode dialog box, select a border you like, as shown in the image below.

Ok, add a border to ** and you're done. With the border, it looks much better. This is shown in the figure below.

In the hands of Light and Shadow Magic, click on Tools --- Upload Border.

The tool Easy Cutout and then find on the right to load the background.

1. First open a material that can be made into a frame, or you can make it yourself (click here to view the tutorial for making a frame). Border footage;

2. Open the NeoFrameMaker tool (friends who haven't already** click this page to enter**: Pattern Border Maker NeoFrameMaker Improved Version);

3. The interface after opening NeoFrameMaker: the main interface of NeoFrameMaker;

4. First of all, it is necessary to clearly distinguish the 8 areas, because they will continue to repeat the splicing according to the length-width of the **, so the border that is too complex is not suitable for this conversion tool. The 8 areas are the upper left corner of the setting parameters - the upper side - the upper right corner and so on, as shown in the figure, I have circled these 8 areas in green for everyone to see, and the following we are to set according to these 8 areas. Divided into 8 areas;

5. Pull out the position of the upper left corner first, and consider the continuity of the edge when pulling the position, because it may continue to repeat with the size of the **. Then click the button in the upper left corner and NeoFrameMaker will automatically calculate the position. Pull out the position of the top left corner;

6. Follow the top, upper right, left, right, lower left, bottom, lower right: the setting of each corner;

7. Now that the 8 areas have been divided, click Preview. As shown in the figure, the effect seen is that the **position is on one side. Let's change the fill color to see the following colors: Preview of the area division effect;

8. The improved neoframemaker only needs to pull out the border position with the mouse - double click to get the ** position;

9.Save as nlf directly: save as nlf format;

10.Put it in the frame subdirectory and see the effect**. Effect** OK, you're done.

You don't need any auxiliary tools at all, just a light and shadow magician.

Go to the Light and Shadow Magic Trick and open the one you need to use, then select the border drop-down list in the top right --- select the multi-image border. At this time, you will find that there is a column of border materials on the right, including ** materials and local materials (you can ** some favorite border materials online). Choose the border style you need to make, and the first image is done.

In the lower part of the right column, there are icons for adding, deleting, moving left, and moving right. Select Add, open the new one you need to add to the border**, and then click on the magnifying glass-like icon in the upper left corner** in the upper right corner, and it's OK. Moving left and right can adjust the position in the corresponding box you added.

That's it, hopefully. Thank you.

Find a border with two openings and put the photo in it.

The first one is to add a watermark.

First, find a watermark with rounded corners** to make a rounded box.

Open this in light and shadow** Select Easy Cutout Remove the background, preview it, and save it in png format for future use. For memorization, it's named "White Edge."

Rounded box". Also save a jpg format, also named "white-edged rounded box." These two files are also used in other methods. Open the light and shadow that needs to make rounded corners** Select free text and layers.

Click Add Watermark to open the saved PNG "White Edge Rounded Box". Adjust position and size. OK Save As.

The second type of rip-off border.

The tear-off border required here is different from the general tear-off border, which is generally black with a white edge in the middle, and white with a white edge and transparent in the middle.

Copy the saved PNG format of the "white border fillet box" to the mask folder of the light and shadow magic installation directory.

Open the ** that needs to be rounded in the light and shadow** Select the tear-off border --- the white-edged rounded corner box Set the "Primary Color Overlay". OK Save.

The third pattern borders.

Open the Pattern Border Maker Open the saved PNG format of the "White Edge Rounded Corner" Position of ** in the mouse box Save it as "White Edge Rounded Corner Box *nlf2". Put this file along with the "white edge rounded box*jpg" saved above"**Copy the files together to the Pattern Borders frame folder of the Light and Shadow Magic installation directory The names of the two files must be the same.

Multi-Picture Borders Installation Instructions.

Formats A multi-image border consists of a set of files with the same name, which contains a jpg file and an nlf3 file. For example, one and one file.

Installation There is a multiframe folder in the installation directory of the Light and Shadow Magician, and the contents of the multi-image border are all in this folder.

In the multiframe directory, create a new folder (you can name it arbitrarily), copy the jpg and nlf3 files of ** to this folder, and complete the installation.

Pattern Border Installation Instructions.

Format A pattern border consists of a set of files with the same name, which must contain a jpg file. For example, one and one file.

Installation There is a frame folder in the installation directory of the Light and Shadow Magician, and the contents of the pattern border are all in this folder.

Tear off the border There is a mask folder under the installation directory of the Light and Shadow Magic Hand, and that's it. Just jpg a file.

One is that it comes with a border installer.,Just click on it to install it.,The installation is successful.。

The second is that there is no built-in installer.

The corresponding border must be copied to the appropriate folder:

Multi-image borders are placed in the :easyframe folder.

The pattern border is placed in :frame

Tear off the border and put it in :mask

If installed correctly. If you use it, you will be successful.

Look at your problem should be misplaced.

A different folder will do the trick. Format

A pattern border consists of a set of files with the same name, which must contain a jpg file. For example, one and one file.

Installation There is a frame folder in the installation directory of the Light and Shadow Magician, and the contents of the pattern border are all in this folder.