What to do if the 7610 keypad is locked 30

The keys are easy to use or not, and it's easy to try.

If you don't check the card, you can press the keys and you can use it!

If it can be used, then it should be caused by your software conflict, like you in that state, only formatting!

Format the phone: When the phone is turned off, press and hold the Transmit button * key and then press the power button and then press the power on button Don't let go of those 3 keys after powering on.

Until the English prompt formatting appears....After the formatting is completed, all personal files in the phone's memory will be deleted.

If you don't check the card, you can't use it, that's a hardware problem.

Send it for repair (repair hardware must not go to after-sales NND has nothing else but black) find a larger repair shop First, it won't fool you, and second, the technology is good.

Just pull out the battery, and then turn it on, and the phone won't lock automatically within a few seconds, and then you find the option to lock automatically, and choose to turn it off.

If it really doesn't work, go to Nokia customer service, and it will be solved soon.

Your software is all installed in the memory card, and mine used to crash well, but there were too many things in the card, and they were formatted. Restart the machine and look down.

Take off your number card and memory card, and replace it with another number card (don't install the memory card first).

Boot. After 6 minutes, replace your original number card and memory card.

Try it first!

Have you dropped your phone or gone into the water these days?

If so, it can only be sent for repair!

First, determine whether it is a hardware failure or a software failure.

If it is a software failure, it is recommended to reinstall the system or antivirus.

If it is a hardware failure, it is recommended to open the keyboard by yourself to clean the keyboard, or buy a new one.

Keyboards are the most susceptible to dust and other dirt. Here's how you can give your keyboard a new look.

Start by using a screwdriver to unscrew the screws on the back of the keyboard. Place the keyboard face up on the table and gently lift the panel, and we will see a bunch of small rubber pads, and when you see it, you will understand why each key is bouncy.

Take out the small rubber pads and wipe them one by one, then put the keyboard panel into the warm water that has been washed and cleaned for a while, then scrub it clean, and finally brush it with a soft brush, and the panel will be clean. The circuit board is generally not too dirty, just wipe it with a clean, soft cloth.

If the keyboard gets water.

Or because your room is wet, the keyboard wiring is corroded and you can change the keyboard.

It's not expensive

Change the cable、Very cheap、

This method is absolutely easy to use

The main version of 7610、It's very simple、

You can buy accessories on **

Go home and change it yourself

As long as you are careful, everyone can change it

Don't be in a hurry