Should you apply the brakes when an automatic transmission car starts? On what basis?

Automatic transmission cars.

In the process of starting, it is necessary to step on the brakes, because the brakes of the automatic transmission car are connected with the clutch, so they can only be put on the gear after stepping on it, and then release the handbrake and then slowly release the clutch, and the car will drive slowly. Whether it is on flat ground or on half a slope, it is necessary to step on the brakes, which can also ensure driving safety. Generally, under normal circumstances, automatic transmissions have N gears.

and P gear, after hanging the N gear, there is no way to change gears without stepping on the brakes, because it is in neutral gear.

The car will not drive in this state, but if it is not pulled on the half-slope without pulling the handbrake, it will slip. No matter what the road is, you need to apply the brakes in advance if you want to start. <>

After getting into the car, click one button to start, at this time the car is in the state of ignition, and then shift gears after stepping on the brakes, and release the electronic parking brake.

Then slowly release the clutch and the car will start moving. It is also necessary to carefully inspect the vehicle before driving, which can also avoid potential safety hazards in the car.

To drive according to the actual situation, you need to apply the brakes when waiting for the traffic light at the intersection, and if you wait for a long time, you can also choose to hang neutral. <>

If you have a short waiting time for the traffic light, you can choose to press the brakes directly, so that you can continue walking after the light turns green. An automatic transmission car is more than a manual transmission car.

It's simpler, so you don't need to change gears frequently while driving. You should always practice good driving habits so that you can keep yourself safe. <>

Many automatic transmission models can be started without stepping on the brakes, but some models need to step on the brakes to start, and it will be safer to step on the brakes when starting, no matter how the model is designed, you should choose to step on the brakes in advance. You should also look at the instrument panel after ignition, so that you can also know if the car is in normal condition.

No, you don't; Because the engine of the automatic transmission is started by N or P gear, there is no need to apply the brakes.

There is no need to apply the brakes when starting the engine, unless it is in n gear and the handbrake is not applied. Due to safety needs, automatic transmission cars are generally set to start the engine only in P or N gear, and applying the brakes is not necessary. When the R or D gear is engaged, the brakes should be pressed, although the car is not set to brake, but because after the R or D gear is engaged, the engine power will be output to the wheels, and the car will move, and the brakes should be applied for safety.

Start on the spot: In this state, the car is generally hung in the "P" gear, and the car has braking power. So at this time, there is no need to apply the brakes to start, but from a safety point of view, it is also a good habit to start by stepping on the brakes.

2.Starting: When a car starts at a traffic light intersection or is about to start, it needs to apply the brakes.

Because in this case, the car needs to be powered, and generally automatic transmission models are locked from P gear to R or N gear, and the brakes must be applied to successfully change gears. Therefore, if the car starts, it needs to apply the brakes first.

Whether the car needs to start with the brakes or not, you have to start with the brakes. This is relatively safe, because when you step on the brakes, the car will not run, so it is relatively safe. Whether it is a manual transmission car or an automatic transmission car, I personally recommend that everyone must step on the brake to start, so that it will be safer.

Different models have different designs, and some cars need to press the brakes when they start, otherwise the car will not respond and will not be able to start. For example, Hyundai has a one-button start function, if you don't press the brakes, the car will not start, and it can only start when the brakes are pressed and the gear is in P or N gear.

Some cars can be started without stepping on the brakes, such as Honda's, the car can be started without stepping on the brakes in P or N gear, so at this time the car can be started without stepping on the brakes.

Automatic transmission gear recognition

The automatic transmission is divided into P, R, D, or SL gears from top to bottom.

P gear - i.e. parking and parking. The rotating part of the car is locked using the mechanism in the gearbox. P gear can only be used when the car comes to a complete stop. In addition, when the car is turned off, the gear must also be in P gear.

n gear - i.e. neutral. In general, when parking for a short time, it will hang neutral. At this point, the right foot can take a break off the brake pedal, but if it is on a slope and the brake still needs to be applied, otherwise it will slide unless the electronic brake is applied.

D gear: Forward and drive. When the driver is in D gear, the speed of the vehicle can be controlled by simply controlling the accelerator pedal. The transmission will automatically set the gear based on the size and speed of the throttle, rather than manually shifting gears.

R - Reverse. As the name suggests, when reversing, hang it in this gear. It should be noted that when the vehicle is not fully stopped, do not force the R gear, otherwise it will cause the transmission to wear out.

S - Sport mode, Sport mode. In this Sport mode, the power is relatively high and the engine will remain running at high speeds. This gear can be engaged in the pursuit of speed, but fuel consumption will also increase.

L-Low is also a low-speed forward gear, which is actually the first gear of a manual gear. Under normal circumstances, when going up and down a hill or a long distance and a large slope, in order to prevent the driver from pressing the brakes for a long time and causing the danger of overheating the brake pads when the car is going downhill, this gear should be hung. Because at this time the transmission only works in first gear and does not change other gears, so the driver is not so tired.

Most of today's automatic transmissions start by applying the brakes to avoid accidents.

Correct ignition action:

1. Turn the key to 1 (or 2) squares; Many lights on the dashboard turn on, and the computer in the car starts to self-test (equivalent to the start of the PC), and at the same time, the oil pump starts to work. After a few seconds, the lights go out. Depending on the car, some lights will not go out until they are ignited.

2. Press the brakes and ignite.

3. When the engine idle speed drops to the normal speed and the water temperature gauge pointer starts to move, step on the brake, hang D gear, and release the handbrake.

4. Release the brakes and go.

Automatic transmission car ignition needs to step on the brakes, the following is the relevant information: 1. Meaning: Automatic transmission is not to manually change gears without the driver, and the vehicle will automatically choose the appropriate gear according to the speed and traffic conditions.

There are six gears on the general automatic transmission car, from top to bottom: P, R, N, D, S, function: the car that opens the automatic transmission only uses the parking gear P gear, the reverse gear R gear, the neutral N gear, and the forward gear D gear can fully meet the needs of general driving, and if you encounter some special driving environments, you need to use other functional gears.

Therefore, if you can choose the right way to control the handling, the car with an automatic transmission will perform better than the manual transmission.

Have a great day!

Question: Do I need to apply the brakes when the automatic transmission is ignited?

Isn't it the kind of keyless entry, it's just a fire, and you need to apply the brakes?

Hello! When the automatic transmission starts, you have to apply the brakes! If you don't step on the brakes, you won't be able to ignite the fire, and the gear solenoid valve will open after stepping on the brakes, and the fuel will be supplied to power when the ignition is fired! I hope you will be satisfied with my answer, and I wish you a happy life.

With the popularity of automatic transmission cars, many consumers choose to buy automatic transmission cars when buying a car. In addition, automatic transmission vehicles are simple and easy to operate, making them ideal for novice driving. However, novice drivers don't know much about automatic transmission vehicles because they are new to automatic transmission vehicles.

For example, many novice drivers don't know if they need to apply the brakes when an automatic car starts. The answer is yes. When an automatic car starts, the brakes must be applied.

If you don't apply the brakes, you can't start. This is a major consideration for security. Just like a manual car, you need to depress the clutch, which is also for safety reasons.

When the owner of the car applies the brakes, it proves that the owner is ready. The vehicle is parked and there is no risk of sliding or starting suddenly. This situation is relatively safe.

Before starting an automatic transmission vehicle, we should first check around the vehicle to avoid obstacles in the blind spot of the vehicle before starting, which will affect our driving safety. After we have checked the surroundings of the car, we should fasten our seatbelts, then adjust the correct sitting position and lower the handbrake. Here are a few steps we must take before driving.

After these preparations, we can start the car, so do we need to apply the brakes when starting the automatic transmission car? Since automatic transmission cars don't have a clutch, they can only rely on brakes to control power. Otherwise, if you don't apply the brakes in D gear, you can't run out in the first place?

If you don't apply the brakes, you can't start the automatic transmission. You can try. If you don't press the brakes, press the one-button start button, it will only enter the power-on state, the dashboard and the large screen will light up, but the engine will not work.

It will only run when you apply the brakes and press the start button again. When starting an automatic car, do not start in nth gear, although it is possible to start in nth gear. Starting in P gear is the best option, because in P gear, the gearbox locks and the gearbox doesn't move even if the handbrake and foot brake are released.

If it is started in nth gear, if it is not operated properly, it may slip, and there are certain safety hazards. Different models have different designs. Some automatic cars require the brakes to be applied when starting, while some automatic cars do not need to apply the brakes when starting.

However, regardless of whether we need to apply the brakes when starting an automatic car, for personal safety, it is best for us to apply the brakes when starting the car. In addition to applying the brakes while driving, it is usually best to apply the brakes with one foot so that in the event of an accident, we will not be too nervous to step on the accelerator and brake.

Yes, the power can be controlled by braking, so that the vehicle can be prevented from starting or rolling, and the car subsystem must be self-checked before starting the vehicle, and it is necessary to determine that the gear is in P gear or neutral.

Yes. If you step on the brakes, it can be safer when starting, and there will be no slipping or sudden walking.

I don't think of course you need to, now you don't need to step on the brakes to ignite whether it's an automatic or manual transmission.

When the automatic transmission car starts, it needs to step on the brakes to hang D gear before it can move forward, otherwise it will lead to the sudden advance of the beam closed tour vehicle and lead to the occurrence of accidents.

When an automatic transmission car starts, you should also pay attention to the problem of pressing the accelerator pedal (accelerator). It is not allowed to press the accelerator too hard while still on the brakes, or even before releasing the handbrake. It is not allowed to press the throttle first and then shift the gear into P or N.

It is not allowed to move the stop while stepping on the accelerator.

The driver is behind the driver's seatThere is no need to step on the brakes, press the start button directly, the ACC light is on at this time, and then press it more, at this time, the vehicle shirt is purely self-test (with a key to start); Steps to start the automatic car correctly:

<>3. Finally, release the handbrake, and then lift your foot and release the footbrake to start.

Parking Steps: <>

3. Finally, slowly lift the foot brake, and then turn off the ignition.

Precautions for starting an automatic transmission car:

1. When the automatic transmission model starts the vehicle, it must be stable, it must be slow, and it must not be fast, and the section collapses because it is not good for the vehicle to lift the brakes quickly.

2. If you encounter a ramp, the starting method will change. It is necessary to analyze the situation on a case-by-case basis.

At present, there are two design modes of automatic transmission cars, one is that the brakes must be applied to start, and the other can be started without stepping on the brakes. Most automatic cars don't need to apply the brakes when starting, unless they are in Nth gear and the handbrake is not pulled. At this point, some brakes are needed for safety reasons.

The working principle of automatic transmission is that when in P mode**, you must apply the brakes no matter which gear you enter. If you don't apply the brakes, you can't push the gear lever. Some push-button start models cannot be started without applying the brakes, which is also due to safety concerns.

Another reason is that keyless start models offer the possibility to distinguish the state of power. Keyless models only have one start and stop button. To distinguish between energized and ignition states, the Zhaochen clan can only be distinguished by whether they step on the brakes or not.

In fact, the automatic transmission does not need to apply the brakes when changing from D to N, and it can be changed directly from D to N gear. However, it should be noted that when using neutral gear for a long time during driving, especially on downhill sections, the speed of the car will become faster and faster due to the influence of gravity. So you have to apply the brakes, braking for a long time may cause the car's brakes to fail.