How to clean the filter of the circular vertical air conditioner

Turn off the main power socket of the cylindrical air conditioner, loosen the screws of the air conditioner with a screwdriver, and remove the panel of the cabinet first. Find the evaporator of the air conditioner, spray the special cleaning agent evenly on the evaporator of the air conditioner, and use a fine soft brush to clean the dirt. After cleaning, reinstall the dust filter and cover the air conditioner enclosure.

Soak a soft cloth in warm water and gently wipe the air conditioner panel. Turn off the main power socket of the cylindrical air conditioner, loosen the screws of the air conditioner with a screwdriver, and remove the panel of the cabinet first. Find the evaporator of the air conditioner and spray the special cleaning agent evenly on the evaporator of the air conditioner.

If there is heavy dirt on the heat sink of the evaporator. Then wash with a fine, soft brush, remove the small tube that came with the detergent bottle, insert it into the nozzle, and spray evenly from left to right. On the surface of the aluminum heat transfer sheet and the coil on the evaporator heat sink, make sure that the surface of the evaporator is completely covered with cleaning foam, then cover the panel and let it sit for about 10 minutes.

After cleaning, reinstall the dust filter and cover the air conditioner housing. Soak a soft cloth in warm water and gently wipe the air conditioner panel. Do not use too much force to avoid damaging the coating on the panel.

Turn on the air conditioner, turn the air volume and cooling to the maximum, and turn on the air conditioner for 20 minutes.

For vertical cylindrical air conditioner cleaning filter, you can click the cleaning icon, wait for the filter to turn from the back to the front, and pull out the filter for cleaning.

Tools Raw material: Gree vertical cylindrical air conditioner.

1. Click the function button.

In the shutdown state, press the function key, and the cleaning pattern of the shower head icon flashes.

2. Confirm the cleaning icon.

Press the up or down button to confirm, the cleaning icon will light up, and the casing of the air conditioner will start to rotate automatically, waiting to stop.

3. Remove the panel screws.

Wait for the filter to turn from the back to the front, unplug the power socket, and use a screwdriver to remove the screws from the panel.

4. Pull out the filter screen for cleaning.

Break the upper and lower buckles, remove the air inlet panel, pull out the filter screen to the right, clean it with warm water, do not use hot water, or use a vacuum cleaner to suck it directly, install it back in reverse order after drying, and it will automatically rotate to the back after powering on.

Material: Air conditioner

1. First of all, we need to turn off the power of the air conditioner when it is powered on, so that the power light of the air conditioner is on, and next, we need to touch the button on the left side of the switch key to make all the function lights on, and press twice in a row to make the light of the cleaning function light on.

<>2. Next, we touch the upper or lower temperature adjustment button to turn the filter of the air conditioner to the front of the air conditioner (generally the filter screen of the cylindrical air conditioner is in the rear).

3. Next, we will unscrew all the screws that fix the back cover of the air conditioner and take the back cover off.

4. Next, after we take off the back cover, we will gently pull out the filter screen and clean it.

5. Next, after we have finished cleaning and drying, we will install the filter screen according to the original position, cover the back cover, and screw it.

6. Next, after we install it, we press the key twice in a row, and wait for the filter to return to its original position.

How to clean the filter screen of the cylindrical air conditioner:There are two ways to disassemble the filter screen of the cylindrical air conditioner, one is an ordinary air conditioner, the filter screen is on the back of the indoor unit, and the outside of the filter screen is a checkered grille, and the screen cover has a position to pick by hand, and the filter screen can be pulled out by picking the screen cover.

There is also a kind of electric, in the shutdown state, press the "function" button on the panel, you will see a sprinkler pattern flashing, press the upper key or the lower key pattern is always on, the shell of the air conditioner begins to rotate, the filter screen will turn from the back to the front, then you can cut off the power to remove the filter for cleaning, after the cleaning is completed, the filter screen will be installed back, and the filter will automatically reset after the power is turned on.

Cleaning the filter:Pat gently or use an electric vacuum cleaner.

When the filter is dirty (such as oil), it can be cleaned with warm water (below 45) dissolved in neutral detergent, and then placed in a cool place to dry.

Note: Do not wash with hot water above 45 to avoid fading or deformation.

Never dry on a fire to avoid the strainer catching fire or deforming.

The method of dismantling and washing the filter screen of the cylindrical air conditioner is as follows:

Tools: Gree KFR-50LW (50551) FNAA-A3, screwdriver, clean water.

1. Turn off the air conditioner, press the function button, wait for the cleaning pattern to appear, and then press the temperature up button or down button.

2. Wait a minute for the air conditioner shell to rotate the filter to the front.

3. Unplug the power socket, there is a screw above and below the grid, we use a screwdriver to remove the top screw first, and the lower screw is also removed with a screwdriver.

4. Gently buckle the buckle with your hand and remove the grid. Attention is hard and fierce, and it is easy to break it if you have too much force.

5. Remove the filter screen, wash it with water and dry it, and then install it back in order.

Summary. The specific steps to clean the air conditioner filter are as follows: 1. Remove the filter screen of the air conditioner, pull the panel apart at both ends of the panel at the same time according to the direction of the arrow, and then pull the filter down to remove it.

2. To clean the filter screen of the air conditioner, you can use a vacuum cleaner or rinse the filter screen with water, when the filter screen is very dirty, you can use warm water (below 45) dissolved in neutral detergent to clean, and then put it in a cool place to dry. Note: Do not wash with hot water above 45 to avoid fading or deformation.

Never dry on a fire, the filter will catch fire or deform. 3. After cleaning the filter screen of the air conditioner, install the filter screen, and then close the panel cover and buckle it. 【

Can you tell us more about that?

The specific steps for cleaning the air conditioner filter are as follows: 1. Remove the air conditioner's filter, press the arrow direction and force the panel at both ends of the panel at the same time to pull it apart at an angle, and then pull the filter down to remove it. 2. To clean the filter screen of the air conditioner, you can use a vacuum cleaner or Sui Jian to rinse the filter with water, when the filter screen is very dirty, you can use warm water (below 45) with neutral detergent to clean, and then put it in a cool place to dry.

Note: Do not wash with hot water above 45 to avoid fading or deformation. Never dry on a fire, the filter will catch fire or deform.

3. After cleaning the filter screen of the air conditioner, install the filter screen, and then close the panel cover and buckle it. 【

Dear, hello, I am glad to answer for the source search: how to clean the filter screen of the circular air conditioner A1 First disconnect the power supply of the air conditioner and separate the wind deflector from the whole. 2. Remove the things on both sides of the air conditioner and loosen the screws of the anal device.

3. After loosening, put the screws and take out the buckles on both sides of the wind shield. 4. Pull out the wind deflector, and then rinse the removed filter with water, if it is very dirty, you can clean it with washing liquid, and make sure that the filter is clean. 5. After the filter is cleaned, the air outlet gap of the wind shield is also rinsed with water.

6. Then place the filter screen in a ventilated environment to dry and flush, and assemble it in order.

How to clean the filter screen of the round air conditionerHello dear, the method of cleaning the filter screen of the round air conditioner is as follows: 1. Remove the air filter from both ends of the panel by the arrow direction to open the panel at an angle, drag the panel with one hand, and push the air filter out of the card slot with the other hand 2, remove the health filter from the air filter along the arrow direction, and install it in the opposite direction when installing. 3. Clean the air filter using a vacuum cleaner or directly clean the filter with clean water, if the filter screen has oil stains, you can use neutral cleaning agents, such as dish soap in 45 degrees Celsius warm water for cleaning, and then rinse it with clean water, clean it and put it in a ventilated place to dry it and then install it 4. Clean the healthy filter screen with a soft brush, brush it with a soft brush, then rinse it with clean water, and finally dry it in a place with sufficient ventilation and sunshine5, filter screen, air filter and health filter are cleaned and installed in reverse according to the method of dismantling the filter, and the installation can be carried out along the direction of the arrow, I hope mine is helpful to you, thank you, I wish you a happy life!